scholarly journals COMPARATIVE INVESTIGATION OF FIXED AND TRACKING PV SOLAR POWER PLANTS ENERGY EFFICIENCY

2019 ◽  
Vol 10 (2) ◽  
Author(s):  
Dragoljub Mirjanić ◽  
Tomislav Pavlović ◽  
Ivana Radonjić ◽  
Darko Divnić
Keyword(s):  
Energy Efficiency ◽  
Power Plant ◽  
Monitoring System ◽  
Power Plants ◽  
Solar Power ◽  
Comparative Investigation ◽  
Solar Power Plant ◽  
Basic Information ◽  
Solar Power Plants

The paper provides basic information on fixed (stationary), one-axis tracking and dual-axis tracking PV solar power plants. In this regard, a schematic overview of the PV solar power plant and basic information on its components (solar modules, inverters, monitoring system, etc.) are given. The following is a description of the fixed, one-tracking and dual-tracking PV solar power plant and their energy efficiency. Finally, measured results of power and temperature of fixed and dual-axis tracking solar modules of 50 W are presented.

scholarly journals Improving the energy efficiency of a solar power plant

2020 ◽  
pp. 132-143
Author(s):  
I. R. Vashchyshak ◽  
V. S Tsykh
Keyword(s):  
Energy Efficiency ◽  
Power Plant ◽  
Power Plants ◽  
Solar Power ◽  
Solar Power Plant ◽  
Solar Panels ◽  
The South ◽  
Inclination Angles ◽  
Fixed Power ◽  
Solar Power Plants

The urgency of the work is due to the feasibility of increasing the energy efficiency of solar power plants through the use of solar energy concentrators. Ways to improve the energy efficiency of solar panels using a sys-tem of directional mirrors, flat Fresnel lenses, spherical concentrators and trackers have been investigated. It is established that the most optimal way to improve the energy efficiency of solar panels is to use inexpensive track-ers with a simple design. The analysis of known types of solar panels, which differ in materials from which their elements are made, and the coefficients of efficiency – dependence of energy produced by a photocell on the intensity of solar radiation per unit of its surface has been carried out, and the type of solar panels by the criterion “price-quality” has been selected. A tracker design has been developed to track the angle of inclination of solar panels to increase efficiency. The electricity generated by the proposed solar power plant was calculated using an online calculator. It is projected to reduce losses when generating electricity for a given power plant due to the use of a tracker compared to a fixed power system, with the same number of solar panels. In order to reduce the cost of the tracker, it is suggested to orientate it to the south at once, and to change the inclination angles twice a year (in early April and late August). The energy efficiency of the power plant is calculated in two stages. At the first stage the amount of electricity from solar panels per year when adjusting only the angle of inclination of the panels to the south is calculated. At the second stage energy efficiency of the power plant is calculated taking into account the increase of energy efficiency of the solar power plant when using the tracker system. The calculated electricity generation of the proposed solar power plant with tracker confirmed the efficiency and feasibility of using the designed tracker system. The application of the designed tracker system allows to increase the energy efficiency of solar panels by an average of 25%.

scholarly journals Investigation of the energy efficiency of PV solar power plant installed at the Faculty of Sciences and Mathematics, University of Nis

2015 ◽  
Vol 13 (3) ◽  
pp. 141-152 ◽  
Author(s):  
Dragana Milosavljevic ◽  
Tomislav Pavlovic
Keyword(s):  
Energy Efficiency ◽  
Power Plant ◽  
Ambient Temperature ◽  
Power Plants ◽  
Solar Power ◽  
Solar Power Plant ◽  
Climate Conditions ◽  
Calculated Energy ◽  
Solar Power Plants ◽  
And Mathematics

The paper provides basic information on the 2 kWp PV solar power plant with monocrystalline silicon solar modules installed on the roof of the Faculty of Sciences and Mathematics (FSM), University of Nis, and the equipment for the investigation of its energy efficiency depending on the real climate conditions. Furthermore, results of the simulation and experimental determination of the energy efficiency of the PV solar power plant at FSM in Nis, in the period from July 1, 2013 to January 1, 2014, are given. It was found that in this time period the average values of the experimental and simulation calculated energy efficiencies of the PV solar power plant were 9.52% and 8.44%, respectively. The increase in the ambient temperature caused a decrease in the PV solar power plant energy efficiency; with an increase in ambient temperature by 1 ?C, the experimental energy efficiency decreased by 0.22%, and the simulation calculated energy efficiency decreased by 0.07%. The obtained data could be used for the planning and application of PV solar power plants in places with a similar climate.

scholarly journals Improving the Efficiency of Solar Power Plants

2020 ◽  
Vol 30 (3) ◽  
pp. 480-497
Author(s):  
Dmitriy S. Strebkov ◽  
Yuriy Kh. Shogenov ◽  
Nikolay Yu. Bobovnikov
Keyword(s):  
Power Plant ◽  
Solar Radiation ◽  
Solar Energy ◽  
Power Plants ◽  
Solar Power ◽  
Horizontal Surface ◽  
Solar Power Plant ◽  
Utilization Factor ◽  
Working Surface ◽  
Solar Power Plants

Introduction. An urgent scientific problem is to increase the efficiency of using solar energy in solar power plants (SES). The purpose of the article is to study methods for increasing the efficiency of solar power plants. Materials and Methods. Solar power plants based on modules with a two-sided working surface are considered. Most modern solar power plants use solar modules. The reflection of solar radiation from the earth’s surface provides an increase in the production of electrical energy by 20% compared with modules with a working surface on one side. It is possible to increase the efficiency of using solar energy by increasing the annual production of electric energy through the creation of equal conditions for the use of solar energy by the front and back surfaces of bilateral solar modules. Results. The article presents a solar power plant on a horizontal surface with a vertical arrangement of bilateral solar modules, a solar power station with a deviation of bilateral solar modules from a vertical position, and a solar power plant on the southern slope of the hill with an angle β of the slope to the horizon. The formulas for calculating the sizes of the solar energy reflectors in the meridian direction, the width of the solar energy reflectors, and the angle of inclination of the solar modules to the horizontal surface are given. The results of computer simulation of the parameters of a solar power plant operating in the vicinity of Luxor (Egypt) are presented. Discussion and Conclusion. It is shown that the power generation within the power range of 1 kW takes a peak value for vertically oriented two-sided solar modules with horizontal reflectors of sunlight at the installed capacity utilization factor of 0.45. At the same time, when the solar radiation becomes parallel to the plane of vertical solar modules, there is a decrease in the output of electricity. The proposed design allows equalizing and increasing the output of electricity during the maximum period of solar radiation. Vertically oriented modules are reliable and easy to use while saving space between modules.

Pengembangan Sistem Pengaturan Suplai Beban (Ats) Pada Pembangkit Listrik Tenaga Hibrid Berbasiskan Mikrokontroler

Kilat ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 261-271
Author(s):  
Sugeng Purwanto
Keyword(s):  
Power Plant ◽  
Alternative Energy ◽  
Power Plants ◽  
Solar Power ◽  
Electrical Energy ◽  
Solar Power Plant ◽  
Solar Panels ◽  
Hybrid Power ◽  
Solar Power Plants ◽  
One Year

ABSTRACT Renewable energy is potential alternative energy to replace the central role of fossil energy which has been going on since the early 20th century. The solar power plant is alternative energy, especially for households and industry, and can be designed as a hybrid power plant consisting of solar panels, batteries, an automatic transfer switch (ATS), and a grid. This research will focus on developing ATS based on a microcontroller. It functions to regulate the load supply automatically from the three sources of electrical energy, like solar panels, batteries, and grid while the microcontroller functions to monitor the transfer of power from the solar power plant to grid and voltage movements in the system so that current and voltage data can be recorded from time to time to improve system reliability, effectiveness, and efficiency of the tool. ATS components consist of MCB, magnetic contactor, timer H3CR, relay, 2000VA inverter, solar charge controller 100A, NodeMCU ESP8266 IoT, and battery 12V 100AH. This research is conducted in one year to produce ATS based on a microcontroller that can automatically regulate the supply of loads from the three sources of electrical energy with a good level of efficiency and stability.  Keywords: solar power plants, hybrid power plants, an automatic transfer switch.  ABSTRAK Energi baru terbarukan merupakan energi alternatif yang potensial untuk menggantikan peran sentral dari energi fosil yang telah berlangsung sejak awal abad ke 20. PLTS merupakan salah satu energi alternatif penyedia energi listrik untuk rumah tangga dan industri serta dapat dirancang sebagai sistem pembangkit listrik tenaga hibrid (PLTH) yang terdiri dari panel surya, baterai, sistem pengaturan beban atau ATS (automatic transfer switch) dan jaringan PLN. Peneltian difokuskan pada pengembangan sistem ATS berbasiskan mikrokontroler. ATS berfungsi untuk mengatur suplai beban secara otomatis dari ketiga sumber energi listrik yaitu panel surya, baterai dan PLN sedangkan mikrokontroler berfungsi memonitor perpindahan daya dari PLTS ke sumber PLN dan pergerakan tegangan pada sistem sehingga dapat dilakukan pencatatan data arus dan tegangan dari waktu ke waktu sehingga dapat meningkatkan keandalan sistem, efektifitas dan efisiensi alat. Komponen ATS terdiri dari MCB, magnetic contactor, timer H3CR, relay, inverter 2000VA, solar charge controller 100A, NodeMCU ESP8266 IoT, dan baterai 12V 100Ah. Penelitian ini akan dilakukan dalam periode satu tahun menghasilkan ATS berbasiskan mikrokontroler yang dapat mengatur suplai beban secara otomatis dari ketiga sumber energi listrik dengan tingkat efisiensi dan kestabilan yang baik. Tim penelitian ini tediri dari 3 orang dan berasal dari program studi teknik elektro, IT PLN.  Kata kunci: pembangkit listrik tenaga surya, pembangkit listrik tenaga hibrid, pengaturan suplai beban.

scholarly journals Operation experience of solar power plants connected to the Russian distributed grid

2018 ◽  
Vol 245 ◽  
pp. 07011 ◽  
Author(s):  
Lev Koshcheev ◽  
Evgeniy Popkov ◽  
Ruslan Seit
Keyword(s):  
Power Plant ◽  
Power Plants ◽  
Solar Power ◽  
Solar Power Plant ◽  
Hydro Power ◽  
Solar Power Plants

The islanding condition of grid-tied solar power plant with hydro power plant of commensurable power is considered in this article. Based on the results of the article, the relevant conclusions were drawn.

scholarly journals Risk Management Based on NPV-at-Risk: A Case Study in Floating Solar Power Plant Project

2021 ◽  
Vol 22 (2) ◽  
pp. 245-254
Author(s):  
Octa Untoro ◽  
Fakhrina Fahma ◽  
Wahyudi Sutopo
Keyword(s):  
At Risk ◽  
Risk Management ◽  
Power Plant ◽  
Power Plants ◽  
Solar Power ◽  
Risk Mitigation ◽  
Risk Identification ◽  
Solar Power Plant ◽  
Investment Return ◽  
Solar Power Plants

There are some unpredicted factors in floating solar power plants that can affect the investment return value. This research aimed to develop an NPV-at-risk based risk management analysis on the floating solar power plant. This research proposed six-staged solutions: communication and consultation, context assignment, risk identification, risk analysis, risk evaluation, and risk mitigation. This study took place in a floating solar power plant in Indonesia. This research showed that some unpredicted risks, such as irradiation, operation and maintenance costs, inflation, and interest rate, could contribute to the investment return. This procedural proposal could be applied in the management of the income realization based on the income projection.

scholarly journals Method for Calculating the Capacity of Solar Power Plants and its Implementation in LabVIEW Environment

2019 ◽  
Vol 140 ◽  
pp. 11007
Author(s):  
Grigory Okhotkin ◽  
Alexander Serebryannikov ◽  
Valery Zakharov ◽  
Sergey Chumarov
Keyword(s):  
Power Plant ◽  
Power Plants ◽  
Solar Power ◽  
Computing Time ◽  
Ease Of Use ◽  
Solar Power Plant ◽  
Plant Component ◽  
Battery Capacity ◽  
Load Schedule ◽  
Solar Power Plants

The paper presents the method for calculating the capacity of an autonomous solar power plant and its components. This method allows considering a load variation during the day as well as specifying the required capacity of the battery and excluding an unjustified overestimation of the power plant component capacities along with the increase in efficiency of the autonomous solar power plant. Formula for determining the required battery capacity of an autonomous solar power plant could be easily generalized for any number of changes in the load schedule steps. Virtual instruments (calculators) for calculating the capacity of an autonomous solar power plant and its components have been developed on the basis of this method in LabVIEW environment. These calculators may have a rather high visibility, ease of use and low memory requirements along with less computing time spent on calculations. The first calculator may allow recalculating capacities of loads on the power plant main supply bus as well as determining the energy consumption of loads per day. The second calculator may be used for determining the required capacity and number of batteries as well as the capacity of the charger, inverters, main supply bus and solar modules along with the solar power plant efficiency.

ENSURING PERMISSIBLE VOLTAGE LEVELS IN LOW-VOLTAGE NETWORKS IN THE DESIGN OF SOLAR POWER PLANTS FOR PRIVATE HOUSEHOLDS

2021 ◽  
pp. 23-27
Author(s):  
Vadim Bodunov
Keyword(s):  
Power Plant ◽  
Power Plants ◽  
Solar Power ◽  
Low Voltage ◽  
Distribution Network ◽  
Electrical Network ◽  
Solar Power Plant ◽  
Limit Values ◽  
Private Households ◽  
Solar Power Plants

One way to stimulate the development of renewable energy is preferential electricity tariffs for businesses, electricity consumers, including energy cooperatives and private households, whose generators produce electricity from alternative energy sources. Such a state policy exists both in Ukraine (the "green tariff") and in other countries (Feed-in tariffs). The simplified connection mechanism of generating power of private households and the fast payback period of solar power plants have led to a rapid increase in the number of such facilities. The peculiarity of network photovoltaic installations of private households is that the investment is proportional, and sometimes even less than the cost of additional reconstruction, for example, to increase the capacity of the electrical network, so, as a rule, their connection to low voltage networks is carried out without any additional changes of intersections of power lines. At the same time, according to the Law of Ukraine on the Electricity Market, the connection of generating installations to consumers, including private households, should not lead to deterioration of regulatory parameters of electricity quality. Another feature of these objects is the almost complete lack of information about the parameters of the electrical network. In the absence of reliable information, it becomes necessary to develop approximate methods for estimating the allowable capacity of solar power plants of private households depending on the place of connection, the parameters of the modern low-quality distribution network and modes of its operation. The article proposes the use of the distribution network model in the form of a line with evenly distributed load from the solar power plants in the form of a concentrated load at the corresponding point of the line. The voltage distribution along the line is simulated when the power of the solar power plant and the place of its connection change. Analytical relations are obtained for the calculation of the solar power plants power limit values to ensure the admissibility of the mode parameters according to the voltage level when varying the solar power plant connection point. A method is proposed to maintain the allowable minimum voltage levels at the terminals of consumers in short-term congested sections of the network.

scholarly journals Solar Power Plant Generation Short-Term Forecasting Model

2018 ◽  
Vol 208 ◽  
pp. 04004
Author(s):  
Stanislav Eroshenko ◽  
Elena Kochneva ◽  
Pavel Kruchkov ◽  
Aleksandra Khalyasmaa
Keyword(s):  
Power Plant ◽  
Power Plants ◽  
Solar Power ◽  
Weather Conditions ◽  
Solar Power Plant ◽  
Short Term ◽  
Variable Capacity ◽  
Solar Power Plants ◽  
Rapid Pace ◽  
Short Term Forecasting

Recently, renewable generation plays an increasingly important role in the energy balance. Solar energy is developing at a rapid pace, while the solar power plants output depends on weather conditions. Solar power plant output short-term forecasting is an urgent issue. The future electricity generation qualitative forecasts allow electricity producers and network operators to actively manage the variable capacity of solar power plants, and thereby to optimally integrate the solar resources into the country's overall power system. The article presents one of the possible approaches to the solution of the short-term forecasting problem of a solar power plant output.

scholarly journals Performance Evaluation of Solar Power Plants: A Review and a Case Study

Processes ◽  
2021 ◽  
Vol 9 (12) ◽  
pp. 2253
Author(s):  
Mahmoud Makkiabadi ◽  
Siamak Hoseinzadeh ◽  
Ali Taghavirashidizadeh ◽  
Mohsen Soleimaninezhad ◽  
Mohammadmahdi Kamyabi ◽  
...  
Keyword(s):  
Power Plant ◽  
Solar Energy ◽  
Electricity Generation ◽  
Power Plants ◽  
Solar Power ◽  
Ocean Waves ◽  
Solar Power Plant ◽  
Large Area ◽  
Energy Technologies ◽  
Solar Power Plants

The world’s electricity generation has increased with renewable energy technologies such as solar (solar power plant), wind energy (wind turbines), heat energy, and even ocean waves. Iran is in the best condition to receive solar radiation due to its proximity to the equator (25.2969° N). In 2020, Iran was able to supply only 900 MW (about 480 solar power plants and 420 MW home solar power plants) of its electricity demand from solar energy, which is very low compared to the global average. Yazd, Fars, and Kerman provinces are in the top ranks of Iran, with the production of approximately 68, 58, and 47 MW using solar energy, respectively. Iran also has a large area of vacant land for the construction of solar power plants. In this article, the amount of electricity generation using solar energy in Iran is studied. In addition, the construction of a 10 MW power plant in the city of Sirjan is economically and technically analyzed. The results show that with US$16.14 million, a solar power plant can be built in the Sirjan region, and the initial capital will be returned in about four years. The results obtained using Homer software show that the highest maximum power generation is in July.

Sign in / Sign up

Export Citation Format

Share Document