scholarly journals ANISOTROPY INFLUENCE ON THE STRIPED ANTIFERROMAGNETISM OF A FRUSTRATED HEISENBERG MODEL: AN APPLICATION TO IRON PNICTIDE MATERIALS

2016 ◽  
Vol 7 (2) ◽  
Author(s):  
Мilan Pantić ◽  
Milica Rutonjski ◽  
Petar Mali ◽  
Milica Pavkov Hrvojević ◽  
Slobodan Radošević
Keyword(s):  
Experimental Data ◽  
Heisenberg Model ◽  
Experimental Studies ◽  
Iron Pnictides ◽  
Magnetic Systems ◽  
Iron Pnictide ◽  
Analytic Expression ◽  
Spectrum Correlation ◽  
Antiferromagnetic Model ◽  
Temperature Green’S Functions

Motivated by several experimental studies of magnetic compounds related to iron pnictides, we examine thermodynamic properties of anisotropic J1a - J1b - Jc - J2 Heisenberg antiferromagnetic model. Our calculations are based on the two-time temperature Green's functions within several well-known decoupling approximations. We obtain excitation spectrum, correlation functions and the analytic expression for the critical temperature and compare our results to the existing experimental data. Results presented here could be of a great importance in the further investigations of similar magnetic systems.

Diagnostics of metal samples using the results of experimental and theoretical study of positively charged microparticles formed upon sample destruction

2018 ◽  
Vol 84 (10) ◽  
pp. 23-28
Author(s):  
D. A. Golentsov ◽  
A. G. Gulin ◽  
Vladimir A. Likhter ◽  
K. E. Ulybyshev
Keyword(s):  
Experimental Data ◽  
Early Stage ◽  
Experimental Studies ◽  
Material Model ◽  
Total Charge ◽  
Cross Sectional ◽  
Practical Applications ◽  
Mechanical And Electrical Properties ◽  
Order Of Magnitude ◽  
Using Data

Destruction of bodies is accompanied by formation of both large and microscopic fragments. Numerous experiments on the rupture of different samples show that those fragments carry a positive electric charge. his phenomenon is of interest from the viewpoint of its potential application to contactless diagnostics of the early stage of destruction of the elements in various technical devices. However, the lack of understanding the nature of this phenomenon restricts the possibility of its practical applications. Experimental studies were carried out using an apparatus that allowed direct measurements of the total charge of the microparticles formed upon sample rupture and determination of their size and quantity. The results of rupture tests of duralumin and electrical steel showed that the size of microparticles is several tens of microns, the particle charge per particle is on the order of 10–14 C, and their amount can be estimated as the ratio of the cross-sectional area of the sample at the point of discontinuity to the square of the microparticle size. A model of charge formation on the microparticles is developed proceeding from the experimental data and current concept of the electron gas in metals. The model makes it possible to determine the charge of the microparticle using data on the particle size and mechanical and electrical properties of the material. Model estimates of the total charge of particles show order-of-magnitude agreement with the experimental data.

An investigation of effects of level density models and gamma ray strength functions on cross-section calculations for the production of 90Y, 153Sm, 169Er, 177Lu and 186Re therapeutic radioisotopes via (n,γ) reactions

2019 ◽  
Vol 108 (1) ◽  
pp. 11-17
Author(s):  
Mert Şekerci ◽  
Hasan Özdoğan ◽  
Abdullah Kaplan
Keyword(s):  
Experimental Data ◽  
Cross Section ◽  
Production Cross Section ◽  
Gamma Ray ◽  
Production Cross ◽  
Level Density ◽  
Experimental Studies ◽  
Level Density Models ◽  
Strength Functions ◽  
Cancer Diseases

Abstract One of the methods used to treat different cancer diseases is the employment of therapeutic radioisotopes. Therefore, many clinical, theoretical and experimental studies are being carried out on those radioisotopes. In this study, the effects of level density models and gamma ray strength functions on the theoretical production cross-section calculations for the therapeutic radioisotopes 90Y, 153Sm, 169Er, 177Lu and 186Re in the (n,γ) route have been investigated. TALYS 1.9 code has been used by employing different level density models and gamma ray strength functions. The theoretically obtained data were compared with the experimental data taken from the literature. The results are presented graphically for better interpretation.

Microemulsion Phase Behavior Observations, Thermodynamic Essentials, Mathematical Simulation

1981 ◽  
Vol 21 (06) ◽  
pp. 747-762 ◽  
Author(s):  
Karl E. Bennett ◽  
Craig H.K. Phelps ◽  
H. Ted Davis ◽  
L.E. Scriven
Keyword(s):  
Experimental Data ◽  
Phase Behavior ◽  
Experimental Studies ◽  
Mathematical Framework ◽  
Alkyl Aryl Sulfonate ◽  
Phase Volume ◽  
Displacement Efficiency ◽  
Alkyl Aryl ◽  
Theoretical Understanding ◽  
Tie Lines

Abstract The phase behavior of microemulsions of brine, hydrocarbon, alcohol, and a pure alkyl aryl sulfonate-sodium 4-(1-heptylnonyl) benzenesulfonate (SHBS or Texas 1) was investigated as a function of the concentration of salt (NaCl, MgCl2, or CaCl2), the hydrocarbon (n-alkanes, octane to hexadecane), the alcohol (butyl and amyl isomers), the concentration of surfactant, and temperature. The phase behavior mimics that of similar systems with the commercial surfactant Witco TRS 10–80. The phase volumes follow published trends, though with exceptions.A mathematical framework is presented for modeling phase behavior in a manner consistent with the thermodynamically required critical tie lines and plait point progressions from the critical endpoints. Hand's scheme for modeling binodals and Pope and Nelson's approach to modeling the evolution of the surfactant-rich third phase are extended to satisfy these requirements.An examination of model-generated progressions of ternary phase diagrams enhances understanding of the experimental data and reveals correlations of relative phase volumes (volume uptakes) with location of the mixing point (overall composition) relative to the height of the three-phase region and the locations of the critical tie lines (critical endpoints and conjugate phases). The correlations account, on thermodynamic grounds, for cases in which the surfactant is present in more than one phase or the phase volumes change discontinuously, both cases being observed in the experimental study. Introduction The phase behavior of a surfactant-based micellar formulation is one of the major factors governing the displacement efficiency of any chemical flooding process employing that formulation. Knowledge of phase behavior is, thus, important for the interpretation of laboratory core floods, the design of flooding processes, and the evaluation of field tests. Phase behavior is connected intimately with other determinants of the flooding process, such as interfacial tension and viscosity. Since the number of equilibrium phases and their volumes and appearances are easier to measure and observe than phase compositions, viscosities, and interfacial tensions, there is great interest in understanding the phase-volume/phase-property relationships. Commercial surfactants, such as Witco TRS 10-80, are sulfonates of crude or partially refined oil. While they seem to be the most economically practicable surfactants for micellar flooding, their behavior, particularly with crude oils and reservoir brines, can be difficult to interpret, the phases varying with time and from batch to batch. Phase behavior studies with a small number of components, in conjunction with a theoretical understanding of phase behavior progressions, can aid in understanding more complex behavior. In particular, one can begin to appreciate which seemingly abnormal experimental observations (e.g., surfactant present in more than one phase or a discontinuity in phase volume trends) are merely features of certain regions of any phase diagram and which are peculiar to the specific crude oil or commercial surfactant used in the study.We report here experimental studies of the phase behavior of microemulsions of a pure sulfonate surfactant (Texas 1), a single normal alkane hydrocarbon, a simple brine, and a small amount of a suitable alcohol as cosurfactant or cosolvent. The controlled variables are hydrocarbon chain length, alcohol, salinity, salt type (NaCl, MgCl2, or CaCl2), surfactant purity, surfactant concentration, and temperature. Many of these experimental data were presented earlier. SPEJ P. 747^

Hybrid Analysis of Gas Annular Seals With Energy Equation

2013 ◽  
Author(s):  
Patrick J. Migliorini ◽  
Alexandrina Untaroiu ◽  
William C. Witt ◽  
Neal R. Morgan ◽  
Houston G. Wood
Keyword(s):  
Experimental Data ◽  
Hybrid Method ◽  
Energy Equation ◽  
Flow Analysis ◽  
Experimental Studies ◽  
Rotor System ◽  
Bulk Flow ◽  
Outlet Temperature ◽  
Cfd Analysis ◽  
Annular Seals

Annular seals are used in turbomachinery to reduce secondary flow between regions of high and low pressure. In a vibrating rotor system, the non-axisymmetric pressure field developed in the small clearance between the rotor and the seal generate reactionary forces that can affect the stability of the entire rotor system. Traditionally, two analyses have been used to study the fluid flow in seals, bulk-flow analysis and computational fluid dynamics (CFD). Bulk-flow methods are computational inexpensive, but solve simplified equations that rely on empirically derived coefficients and are moderately accurate. CFD analyses generally provide more accurate results than bulk-flow codes, but solution time can vary between days and weeks. For gas damper seals, these analyses have been developed with the assumption that the flow can be treated as isothermal. Some experimental studies show that the difference between the inlet and outlet temperature temperatures is less than 5% but initial CFD studies show that there can be a significant temperature change which can have an effect on the density field. Thus, a comprehensive analysis requires the solution of an energy equation. Recently, a new hybrid method that employs a CFD analysis for the base state, unperturbed flow and a bulk-flow analysis for the first order, perturbed flow has been developed. This method has shown to compare well with full CFD analysis and experimental data while being computationally efficient. In this study, the previously developed hybrid method is extended to include the effects of non-isothermal flow. The hybrid method with energy equation is then compared with the isothermal hybrid method and experimental data for several test cases of hole-pattern seals and the importance of the use of energy equation is studied.

Effect of Boundary Layer Suction on Aerodynamic Performance of High-Turning Compressor Cascade

2013 ◽  
Author(s):  
Longxin Zhang ◽  
Shaowen Chen ◽  
Hao Xu ◽  
Jun Ding ◽  
Songtao Wang
Keyword(s):  
Experimental Data ◽  
Boundary Layer ◽  
Experimental Studies ◽  
Aerodynamic Performance ◽  
Parameter Distribution ◽  
Compressor Cascade ◽  
Boundary Layer Suction ◽  
End Wall ◽  
Low Speed Wind Tunnel ◽  
Good Agreement

Compared with suction slots, suction holes are (1) flexible in distribution; (2) alterable in size; (3) easy to fabricate and (4) high in strength. In this paper, the numerical and experimental studies for a high turning compressor cascade with suction air removed by using suction holes in the end-wall at a low Mach numbers are carried out. The main objective of the investigation is to study the influence of different suction distributions on the aerodynamic performance of the compressor cascade and to find a better compound suction scheme. A numerical model was first made and validated by comparing with the experimental results. The computed flow visualization and exit parameter distribution showed a good agreement with experimental data. Second, the model was then used to simulate the influence of different suction distributions on the aerodynamic performance of the compressor cascade. A better compound suction scheme was obtained by summarizing numerical results and tested in a low speed wind tunnel. As a result, the compound suction scheme can be used to significantly improve the performance of the compressor cascade because the corner separation gets further suppressed.

Photobiological safety of lamps and lamp systems in agriculture

2021 ◽  
Vol 1 (106) ◽  
pp. 34-41
Author(s):  
A. Semenov ◽  
T. Sakhno ◽  
Y. Sakhno
Keyword(s):  
Experimental Data ◽  
Design Methodology ◽  
Risk Group ◽  
Experimental Studies ◽  
Safety Measures ◽  
Safety Requirements ◽  
Labor Safety ◽  
Uv Lamps ◽  
Practical Implications ◽  
Additional Safety

Purpose: The article aims to study the photobiological safety of ultraviolet radiation of UV lamps in agriculture. Design/methodology/approach: The research and analysis of the lighting characteristics of samples of LUF 80 and LE 30 lamps, which are the most widely used in the agrarian complex. Findings: Experimental studies have shown that the photobiological safety of LUF 80 lamps belongs to the low-risk group RG1, while LE 30 lamps show high risk and are thus assigned to group RG3. Research limitations/implications: It is advisable to continue studying the characteristics of lamps and lamp systems for various fields of agriculture on the market in Ukraine to assess their compliance with safety requirements. Practical implications: The application of the proposed approach allows increasing the level of labor safety in commercial greenhouses or any other industry by choosing the suitable lamps for agriculture that at present are not regulated by additional safety measures. Originality/value: The originality of the article is showing the results of the experimental data of the studies of light-technical characteristics of ultraviolet lamps for agriculture.

Concentration Dependence of the Surface Tension of Three and Four-Component Systems with Peculiarities in the Surface Tension Isotherms of Lateral Binary Melts

2021 ◽  
Vol 1022 ◽  
pp. 194-202
Author(s):  
R.Kh. Dadashev ◽  
R.A. Kutuev
Keyword(s):  
Experimental Data ◽  
Surface Tension ◽  
Concentration Dependence ◽  
Experimental Error ◽  
Binary Systems ◽  
Experimental Studies ◽  
Study Results ◽  
Component Systems ◽  
Minimum Depth ◽  
Surface Tension Isotherms

The experimental study results of the melts concentration dependence of the surface tension of the four-component indium-tin-lead-bismuth system and its constituent binary systems of indium-tin, indium-lead, indium-bismuth, tin-lead, tin-bismuth, lead-bismuth are presented in the paper. It is shown that the concentration dependence of the melts surface tension of the In-Sn-Pb-Bi four-component system can be predicted from the data on ST (surface tension) values of lateral binary systems. Features in the ST isotherms in the form of a minimum are observed only in the indium-tin lateral system from all lateral binaries. A distinctive feature of the detected minimum is that the minimum depth slightly exceeds the experimental error. Therefore, in addition to the fact that the area of average compositions was studied more thoroughly, we carried out the surface tension measurements by two independent methods. The experimental data obtained by both methods coincide within the experimental error and indicate the extremum availability on ST isotherms. Thus, ST experimental studies by two independent methods confirmed the presence of a flat minimum on ST isotherms of the indium-tin binary system increasing the reliability of the obtained data. The obtained outcomes and their comparison with experimental data have shown that the considered models for predicting surface properties based on data due to similar properties of lateral binary systems adequately reflect the experimental dependences. However, the prediction model based on Kohler's method of excess values describes the experimental curves more accurately.

Kinetics of hypso anhydrites dissolution in water. Experimental studies

2019 ◽  
pp. 93-96
Author(s):  
A. L. Lebedev ◽  
I. V. Avilina
Keyword(s):  
Experimental Data ◽  
Experimental Study ◽  
Riccati Equation ◽  
Balance Equation ◽  
Experimental Studies ◽  
Common Ion ◽  
The Common ◽  
Common Ion Effect ◽  
Kinetics Of Dissolution ◽  
Kinetics Of

Experimental study of kinetics of dissolution of hypso anhydrites at 25 ᵒC made it possible to formulate model of the process in the form of a balance equation for the kinetics of dissolution of gypsum, anhydrite (first and second orders, respectively) and kinetics of precipitation of gypsum (second order). The processing of the experimental data were carried out on the basis of the solution of the Riccati equation. When taking into account the common-ion effect on the solubility of gypsum and anhydrite, the calculated values turned out to be more comparable with the experimental ones.

The Revised Universal Slope Method to Predict the Low-Cycle Fatigue Lives of Elbow and Tee Pipes

2017 ◽  
Vol 139 (5) ◽  
Author(s):  
Hiun Nagamori ◽  
Koji Takahashi
Keyword(s):  
Experimental Data ◽  
Internal Pressure ◽  
Low Cycle Fatigue ◽  
Experimental Studies ◽  
High Accuracy ◽  
Universal Method ◽  
Cycle Fatigue ◽  
Element Analysis ◽  
Slope Method ◽  
Stress States

The stress states of elbow and tee pipes are complex and different from those of straight pipes. The low-cycle fatigue lives of elbows and tees cannot be predicted by Manson's universal slope method; however, a revised universal method proposed by Takahashi et al. was able to predict with high accuracy the low-cycle fatigue lives of elbows under combined cyclic bending and internal pressure. The objective of this study was to confirm the validity of the revised universal slope method for the prediction of low-cycle fatigue behaviors of elbows and tees of various shapes and dimensions under conditions of in-plane bending and internal pressure. Finite element analysis (FEA) was carried out to simulate the low-cycle fatigue behaviors observed in previous experimental studies of elbows and tees. The low-cycle fatigue behaviors, such as the area of crack initiation, the direction of crack growth, and the fatigue lives, obtained by the analysis were compared with previously obtained experimental data. Based on this comparison, the revised universal slope method was found to accurately predict the low-cycle fatigue behaviors of elbows and tees under internal pressure conditions regardless of differences in shape and dimensions.

scholarly journals Analytical Model for Restraint Strains and Self-stressed in Expansive Concrete Filled Steel Tubes (ECFST) estimation

2020 ◽  
pp. 93-98
Author(s):  
Viktar V. Tur ◽  
Radoslaw Duda ◽  
Dina Khmaruk ◽  
Viktar Basav
Keyword(s):  
Experimental Data ◽  
Experimental Studies ◽  
Steel Tube ◽  
Development Model ◽  
Steel Tubes ◽  
Concrete Core ◽  
Expansive Concrete ◽  
Proposed Model ◽  
Comparison Results ◽  
Concrete Filled Steel Tubes

In this paper, a modified strains development model (MSDM) for expansive concrete-filled steel tube (ECFST) was formulated and verified on the experimental data, obtained from testing specimens on the expansion stage. The modified strain development model for restraint strains and self-stresses values estimation in concrete with high expansion energy capacity under any type of the symmetrical and unsymmetrical finite stiffness restraint conditions was proposed. Based on proposed MSDM a new model for expansive concrete-filled steel tubes is developed. The main difference between this model and other previously developed models consists in taking into account in the basic equations an induced force in restrain that is considered as an external load applied to the concrete core of the member. For verification of the proposed model-specific experimental studies were performed. As follows from comparison results restrained expansion strains values calculated following the proposed model shows good compliance with experimental data. The values predicted by the proposed MSDM for concrete-filled steel and obtained experimental data demonstrated good agreement that confirms the validity of the former.

Sign in / Sign up

Export Citation Format

Share Document