scholarly journals Effect of Fiber Surface Morphology on Water Sorption of Pre-treated Hemp Fiber Reinforced LLDPE Composites

2015 ◽  
Vol 9 ◽  
pp. 17 ◽  
Author(s):  
Zane Zelca ◽  
Silvija Kukle ◽  
Janis Kajaks ◽  
Edgars Kirilovs
Keyword(s):  
Surface Morphology ◽  
Water Sorption ◽  
Fiber Surface ◽  
Fiber Reinforced ◽  
Hemp Fiber

Effect of Sisal Fiber Surface Treatments on Sisal Fiber Reinforced Polypropylene (PP) Composites

2014 ◽  
Vol 906 ◽  
pp. 167-177 ◽  
Author(s):  
Hou Lei Gan ◽  
Lei Tian ◽  
Chang Hai Yi
Keyword(s):  
Surface Morphology ◽  
Morphological Changes ◽  
Fiber Surface ◽  
Atmospheric Plasma ◽  
Single Fiber ◽  
Sisal Fiber ◽  
Fiber Reinforced ◽  
Polypropylene Composites ◽  
Pull Out ◽  
Debonding Process

Abstract: The Interface of sisal fiber which was treated by using alkali, potassium permanganate, atmospheric plasma and silane reinforced polypropylene composites were investigated by single fiber pull-out testes and surface morphology were studied. The results indicated that the morphological changes observed on the sisal fiber surface were obviously evident. Untreated, permanganate and plasma treated sisal fiber reinforced PP show a stable debonding process. Silane treated sisal fiber reinforced PP show an unstable debonding process. Single fiber pull-out tests indicated that the IFSS value was in the order of FIB < FIBKMnO4 < FIBP < FIBKH-550 < FIBKH-570. As can be seen from surface morphology of pull-out fiber, a little of PP resin was adhered to the pull-out FIB, FIBKMnO4, FIBP of sisal fiber. In contrast, PP resin at the surface of pull-out fiber was flaked off and sisal fibril was drawn out from sisal fiber were observed from pull-out fibers of FIBKH-550 and FIBKH-570.

scholarly journals A Characterization Study of Morphology and Properties of Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH)/Aloe Vera Fibers Biocomposites: Effect of Fiber Surface Treatments

Proceedings ◽  
2020 ◽  
Vol 69 (1) ◽  
pp. 38
Author(s):  
Celia Idres ◽  
Mustapha Kaci ◽  
Nadjet Dehouche ◽  
Idris Zembouai ◽  
Stéphane Bruzaud
Keyword(s):  
Thermal Stability ◽  
Surface Morphology ◽  
Water Absorption ◽  
Loss Modulus ◽  
Aloe Vera ◽  
Fiber Surface ◽  
Complex Viscosity ◽  
Absorption Capacity ◽  
Characterization Study ◽  
Efficient Route

This paper aims to investigate the effect of different chemical modifications of biocomposites based on poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH) and aloe vera bio-fibers incorporated at 20 wt%. The fiber surface was modified with alkaline, organosilanes, and combined alkaline/organosilanes. Surface morphology, thermal stability, water absorption capacity, and rheological behavior of the modified biocomposite materials were studied, and the results compared to both unmodified biocomposites and neat PHBH. The study showed that the modified biocomposites with both alkaline and organosilanes exhibited an improved surface morphology, resulting in a good fiber/matrix interfacial adhesion. As a result, increases in complex viscosity, storage modulus, and loss modulus were observed, whereas water absorption was reduced. Thermal stability remained almost unchanged, with the exception of the biocomposite treated with alkaline, where this property decreased significantly. Finally, the coupling of alkaline and organosilane modification is an efficient route to enhance the properties of PHBH biocomposites.

scholarly journals Effect of Glycero-(9,10-trioxolane)-trialeate on the Physicochemical Properties of Non-Woven Polylactic Acid Fiber Materials

Polymers ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2517
Author(s):  
Anatoliy Olkhov ◽  
Olga Alexeeva ◽  
Marina Konstantinova ◽  
Vyacheslav Podmasterev ◽  
Polina Tyubaeva ◽  
...  
Keyword(s):  
Specific Surface ◽  
Surface Area ◽  
Polylactic Acid ◽  
Specific Surface Area ◽  
Water Sorption ◽  
Fiber Surface ◽  
High Water ◽  
Scanning Calorimetry ◽  
Fiber Mats ◽  
Fiber Materials

Biocompatible glycero (9,10-trioxolane) trioleate (ozonide of oleic acid triglyceride, OTOA) was incorporated into polylactic acid (PLA) fibers by electrospinning and nonwoven PLA mats with 1%, 3% and 5% OTOA content. The morphological, mechanical, thermal and water sorption properties of electrospun PLA mats after the addition of OTOA were studied. A morphological analysis showed that the addition of OTOA increased the average fiber diameter and induced the formation of pores on the fiber surface, leading to an increase in the specific surface area for OTOA-modified PLA fibrous mats. PLA fiber mats with 3% OTOA content were characterized by a highly porous surface morphology, an increased specific surface area and high-water sorption. Differential scanning calorimetry (DSC) was used to analyze the thermal properties of the fibrous PLA mats. The glass transition temperatures of the fibers from the PLA–OTOA composites decreased as the OTOA content increased, which was attributed to the plasticizing effect of OTOA. DSC results showed that OTOA aided the PLA amorphization process, thus reducing the crystallinity of the obtained nonwoven PLA–OTOA materials. An analysis of the mechanical properties showed that the tensile strength of electrospun PLA mats was improved by the addition of OTOA. Additionally, fibrous PLA mats with 3% OTOA content showed increased elasticity compared to the pristine PLA material. The obtained porous PLA electrospun fibers with the optimal 3% OTOA content have the potential for various biomedical applications such as drug delivery and in tissue engineering.

scholarly journals Hemp Fiber Reinforced Red Mud/Fly Ash Geopolymer Composite Materials: Effect of Fiber Content on Mechanical Strength

Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 511 ◽  
Author(s):  
Eyerusalem A. Taye ◽  
Judith A. Roether ◽  
Dirk W. Schubert ◽  
Daniel T. Redda ◽  
Aldo R. Boccaccini
Keyword(s):  
Fly Ash ◽  
Mechanical Strength ◽  
Red Mud ◽  
Fiber Reinforced ◽  
Brazilian Tensile Strength ◽  
Hemp Fiber ◽  
Hemp Fibers ◽  
The Matrix ◽  
Geopolymer Composites ◽  
Scanning Electron

Novel hemp fiber reinforced geopolymer composites were fabricated. The matrix was a new geopolymer based on a mixture of red mud and fly ash. Chopped, randomly oriented hemp fibers were used as reinforcement. The mechanical properties of the geopolymer composite, such as diametral tensile (DTS) (or Brazilian tensile) strength and compressive strength (CS), were measured. The geopolymer composites reinforced with 9 vol.% and 3 vol.% hemp fiber yielded average DTS values of 5.5 MPa and average CS values of 40 MPa. Scanning electron microscopy (SEM) studies were carried out to evaluate the microstructure and fracture surfaces of the composites. The results indicated that the addition of hemp fiber is a promising approach to improve the mechanical strength as well as to modify the failure mechanism of the geopolymer, which changed from brittle to “pseudo-ductile”.

Study on the Surface Metallization of Aramid Fibers

2012 ◽  
Vol 503-504 ◽  
pp. 1216-1219
Author(s):  
Long Li ◽  
Xue Yu Hu
Keyword(s):  
Surface Morphology ◽  
Fiber Surface ◽  
Electroless Nickel ◽  
Aramid Fiber ◽  
Electroless Nickel Plating ◽  
Nickel Plating ◽  
Aramid Fibers ◽  
Surface Metallization

In this paper, aramid fiber surface metallization was investigated by electroless nickel plating technology. Acid nickel plating and alkaline nickel plating of aramid fiber was compared. Through experiment, it was shown that the temperature of alkaline nickel plating was lower compared with acid nickel plating, and resistance of metalized aramid fibers by alkaline nickel plating was 36.8Ω•cm, and the resistance by acid plating was 51.2Ω•cm. The surface morphology of fibers was observed using SEM

Hemp Fiber Reinforced Composites: Morphological and Mechanical Properties

2011 ◽  
Vol 332-334 ◽  
pp. 121-125
Author(s):  
Xing Mei Guo ◽  
Yi Ping Qiu
Keyword(s):  
Polymer Composites ◽  
Unsaturated Polyester ◽  
Glass Fibers ◽  
Fiber Reinforced Composites ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Hemp Fiber ◽  
Plant Fibers ◽  
Natural Plant ◽  
Reinforcing Fillers

The use of natural plant fibers as reinforcing fillers in fiber-polymer composites has drawn much interest in recent years. Natural plant fibers as reinforcing fillers have several advantages over inorganic fillers such as glass fibers; they are abundant, readily available, renewable, inexpensive, biodegradable, of low density, and of high specific strength. Hemp fibers are one of the most attractive natural plant fibers for fiber-reinforced composites because of their exceptional specific stiffness. In this review, we summarize recent progress in developments of the hemp fiber reinforced composites such as hemp fiber reinforced unsaturated polyester (UPE), hemp fiber reinforced polypropylene (PP), hemp fiber reinforced epoxy composites, and so on, illustrate with examples how they work, and discuss their intrinsic fundamentals and optimization designs. We are expecting the review to pave the way for developing fiber-polymer composites with higher strength.

Sign in / Sign up

Export Citation Format

Share Document