scholarly journals A Novel Rotor Position Estimation Method using a Rotation Matrix for a Square-Wave Signal Injected Sensorless Control in IPMSM

2016 ◽  
Vol 21 (3) ◽  
pp. 215-223
Author(s):  
Sang-Il Kim ◽  
Rae-Young Kim
Keyword(s):  
Sensorless Control ◽  
Estimation Method ◽  
Position Estimation ◽  
Rotation Matrix ◽  
Square Wave ◽  
Rotor Position ◽  
Wave Signal ◽  
Rotor Position Estimation

scholarly journals High Frequency Square-Wave Voltage Injection Scheme-Based Position Sensorless Control of IPMSM in the Low- and Zero- Speed Range

Energies ◽  
2019 ◽  
Vol 12 (24) ◽  
pp. 4776
Author(s):  
Shuang Wang ◽  
Jianfei Zhao ◽  
Kang Yang
Keyword(s):  
High Frequency ◽  
Sensorless Control ◽  
Magnetic Polarity ◽  
Position Estimation ◽  
Estimation Accuracy ◽  
Band Pass Filter ◽  
Pass Filter ◽  
Square Wave ◽  
Rotor Position ◽  
Rotor Position Estimation

In this paper, a new sensorless control scheme with the injection of a high-frequency square-wave voltage of an interior permanent-magnet synchronous motor (IPMSM) at low- and zero-speed operation is proposed. Conventional schemes may face the problems of obvious current sampling noise and slow identification in the process of magnetic polarity detection at zero speed operation, and the effects of inverter voltage error on the rotor position estimation accuracy at low speed operation. Based on the principle analysis of d-axis magnetic circuit characteristics, a method for determining the direction of magnetic polarity of d-axis two-opposite DC voltage offset by uninterruptible square-wave injection is proposed, which is fast in convergence rate of magnetic polarity detection and more distinct. In addition, the strategy injects a two-opposite high-frequency square-wave voltage vectors other than the one voltage vector into the estimated synchronous reference frame (SRF), which can reduce the effects of inverter voltage error on the rotor position estimation accuracy. With this approach, low-pass filter (LPF) and band-pass filter (BPF), which are used to obtain the fundamental current component and high-frequency current response with rotor position information respectively in the conventional sensorless control, are removed to simplify the signal process for estimating the rotor position and further improve control bandwidth. Finally, the experimental results on an IPMSM drive platform indicate that the rotor position with good steady state and dynamic performance can be obtained accurately at low-and zero-speed operation with the sensorless control strategy.

scholarly journals Performance Analysis of a Full Order Sensorless Control Adaptive Observer for Doubly-Fed Induction Generator in Grid Connected Operation

Energies ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1254
Author(s):  
Gianluca Brando ◽  
Adolfo Dannier ◽  
Ivan Spina
Keyword(s):  
Sensorless Control ◽  
Estimation Error ◽  
Position Estimation ◽  
Adaptive Observer ◽  
Induction Generator ◽  
Doubly Fed Induction Generator ◽  
Rotor Position ◽  
Stator Flux ◽  
Doubly Fed ◽  
Rotor Position Estimation

This paper focuses on the performance analysis of a sensorless control for a Doubly Fed Induction Generator (DFIG) in grid-connected operation for turbine-based wind generation systems. With reference to a conventional stator flux based Field Oriented Control (FOC), a full-order adaptive observer is implemented and a criterion to calculate the observer gain matrix is provided. The observer provides the estimated stator flux and an estimation of the rotor position is also obtained through the measurements of stator and rotor phase currents. Due to parameter inaccuracy, the rotor position estimation is affected by an error. As a novelty of the discussed approach, the rotor position estimation error is considered as an additional machine parameter, and an error tracking procedure is envisioned in order to track the DFIG rotor position with better accuracy. In particular, an adaptive law based on the Lyapunov theory is implemented for the tracking of the rotor position estimation error, and a current injection strategy is developed in order to ensure the necessary tracking sensitivity around zero rotor voltages. The roughly evaluated rotor position can be corrected by means of the tracked rotor position estimation error, so that the corrected rotor position is sent to the FOC for the necessary rotating coordinate transformation. An extensive experimental analysis is carried out on an 11 kW, 4 poles, 400 V/50 Hz induction machine testifying the quality of the sensorless control.

Sign in / Sign up

Export Citation Format

Share Document