scholarly journals Development of ultrahigh-temperature oxidation resistant high-strength C/C composite material.

1993 ◽  
Vol 19 (1) ◽  
pp. 32-34
Author(s):  
Susumu NAKAI ◽  
Tsuneo KINJO ◽  
Akinori MATSUURA ◽  
Shoji MAEKAWA ◽  
Kozo YUDATE
Keyword(s):  
Composite Material ◽  
High Strength ◽  
Temperature Oxidation ◽  
Oxidation Resistant ◽  
Ultrahigh Temperature

A Perspective on Modeling Materials in Extreme Environments: Oxidation of Ultrahigh-Temperature Ceramics

MRS Bulletin ◽  
2006 ◽  
Vol 31 (5) ◽  
pp. 410-418 ◽  
Author(s):  
Angelo Bongiorno ◽  
Clemens J. Först ◽  
Rajiv K. Kalia ◽  
Ju Li ◽  
Jochen Marschall ◽  
...  
Keyword(s):  
Modeling And Simulation ◽  
Atomistic Simulation ◽  
Extreme Environments ◽  
Protective Layer ◽  
Ceramic Composites ◽  
Atomistic Modeling ◽  
Temperature Oxidation ◽  
Simulation Techniques ◽  
Oxidation Resistant ◽  
Ultrahigh Temperature

AbstractThe broader context of this discussion, based on a workshop where materials technologists and computational scientists engaged in a dialogue, is an awareness that modeling and simulation techniques and computational capabilities may have matured sufficiently to provide heretofore unavailable insights into the complex microstructural evolution of materials in extreme environments.As an example, this article examines the study of ultrahigh-temperature oxidation-resistant ceramics, through the combination of atomistic simulation and selected experiments.We describe a strategy to investigate oxygen transport through a multi-oxide scale—the protective layer of ultrahigh-temperature ceramic composites ZrB2-SiC and HfB2-SiC—by combining first-principles and atomistic modeling and simulation with selected experiments.

Phase Constitution and Oxidation Resistance of B2 (Ir, Co)Al

2002 ◽  
Vol 753 ◽  
Author(s):  
Hideki Hosoda ◽  
Hiroshi Noma ◽  
Kenji Wakashima
Keyword(s):  
Oxidation Resistance ◽  
Oxidation Behavior ◽  
Hot Forging ◽  
Isothermal Oxidation ◽  
Oxidation Products ◽  
Phase Constitution ◽  
Temperature Oxidation ◽  
Arc Melting ◽  
Oxidation Resistant ◽  
Ultrahigh Temperature

ABSTRACTB2 iridium aluminide (IrAl) is hopeful for use as an ultrahigh temperature oxidation resistant coating above 1600K. In this study, the effect of Co substitution for Ir on phase constitution, hardness and oxidation behavior was studied for IrAl alloys. Alloys of (Ir, Co)-50mol%Al with various Co contents were fabricated by Ar-arc melting followed by hot-forging at 1773K. Oxidation behavior was evaluated using thermogravimetry (TG) in Ar-67%O2 up to 1823K. XRD and SEM were also carried out for alloy characterization. It was found that a continuous B2 solid solution (Ir,Co)Al is formed between IrAl and CoAl. Depending on the Co concentration, the oxidation products identified after heating to 1873K in Ar-67%O2 were Ir, IrO2 and A2O3 and/or Co2AlO4. Thin and continuous Al2O3 layers were observed after isothermal oxidation at 1673K when Co content is more than 20mol%Co. In this case, the weight change by isothermal oxidation at 1673K becomes higher with decreasing Co content. The (Ir,Co)Al alloys containing 20–40mol%Co exhibit higher oxidation resistance than CoAl and IrAl, and thus oxidation resistance of CoAl is improved by Ir addition.

REYNOLDS R-301

Alloy Digest ◽  
1954 ◽  
Vol 3 (5) ◽  
Keyword(s):  
Composite Material ◽  
Corrosion Resistance ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Corrosion Resistant ◽  
Bearing Strength ◽  
High Strength Aluminum Alloy

Abstract Reynolds R301 is a composite material, constituted of a core of high strength aluminum alloy, clad with a corrosion-resistant aluminum alloy. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive, shear, and bearing strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Al-16. Producer or source: Reynolds Metals Company.

High Temperature Oxidation Resistant Coatings

1984 ◽  
Author(s):  
R. H. Tuffias ◽  
J. T. Harding ◽  
R. B. Kaplan
Keyword(s):  
High Temperature ◽  
High Temperature Oxidation ◽  
Temperature Oxidation ◽  
Oxidation Resistant

Promising hybrid fabrics based on carbon and aramid fibers as a reinforcing filler for polymer composites

2019 ◽  
pp. 86-95 ◽  
Author(s):  
G. F. Zhelezina ◽  
V. G. Bova ◽  
S. I. Voinov ◽  
A. Ch. Kan
Keyword(s):  
Composite Material ◽  
Polymer Composites ◽  
Carbon Fibers ◽  
Mechanical Characteristics ◽  
High Strength ◽  
High Modulus ◽  
Hybrid Composite Material ◽  
Hybrid Fabric ◽  
Reinforcing Filler ◽  
Physical And Mechanical Characteristics

The paper considers possibilities of using a hybrid fabric made of high-modulus carbon yarn brand ZhGV and high-strength aramid yarns brand Rusar-NT for polymer composites reinforcement. The results of studies of the physical and mechanical characteristics of hybrid composite material and values of the implementation of the strength and elasticity carbon fibers and aramid module for composite material are presented. 

scholarly journals Investigation into the Structural, Chemical and High Mechanical Reforms in B4C with Graphene Composite Material Substitution for Potential Shielding Frame Applications

Molecules ◽  
2021 ◽  
Vol 26 (7) ◽  
pp. 1921
Author(s):  
Ibrahim M. Alarifi
Keyword(s):  
Composite Material ◽  
Melting Point ◽  
Boron Carbide ◽  
High Strength ◽  
Stir Casting ◽  
High Fracture Toughness ◽  
Chemical Compositions ◽  
High Fracture ◽  
Fabrication Procedure ◽  
Standard Designs

In this work, boron carbide and graphene nanoparticle composite material (B4C–G) was investigated using an experimental approach. The composite material prepared with the two-step stir casting method showed significant hardness and high melting point attributes. Scanning electron microscopy (SEM), along with energy dispersive X-ray spectroscopy (EDS) analysis, indicated 83.65%, 17.32%, and 97.00% of boron carbide + 0% graphene nanoparticles chemical compositions for the C-atom, Al-atom, and B4C in the compound studied, respectively. The physical properties of all samples’ B4C–G like density and melting point were 2.4 g/cm3 density and 2450 °C, respectively, while the grain size of B4C–G was in the range of 0.8 ± 0.2 µm. XRD, FTIR, and Raman spectroscopic analysis was also performed to investigate the chemical compositions of the B4C–G composite. The molding press composite machine was a fabrication procedure that resulted in the formation of outstanding materials by utilizing the sintering process, including heating and pressing the materials. For mechanical properties, high fracture toughness and tensile strength of B4C–G composites were analyzed according to ASTM standard designs. The detailed analysis has shown that with 6% graphene content in B4C, the composite material portrays a high strength of 134 MPa and outstanding hardness properties. Based on these findings, it is suggested that the composite materials studied exhibit novel features suitable for use in the application of shielding frames.

scholarly journals The influence of high-temperature oxidation on the phase distribution of metal substrate in duplex stainless steel

2021 ◽  
Author(s):  
Minami Matsumoto ◽  
Ken Kimura ◽  
Natsuko Sugiura
Keyword(s):  
Stainless Steels ◽  
Room Temperature ◽  
Phase Distribution ◽  
High Strength ◽  
Metal Substrate ◽  
Temperature Oxidation ◽  
Good Corrosion Resistance ◽  
Mn Oxide ◽  
Typical Type ◽  
Compositional Changes

AbstractDuplex stainless steels (DSSs), which consist of ferrite and austenite phases, are widely used owing to their high strength and good corrosion resistance. However, the oxidation behavior of DSSs is extremely complicated because they have dual phases. In this study, changes in the scale and the metal substrate during oxidation were investigated. UNS S32101 (Fe-21.5%Cr–5%Mn–1.5%Ni–0.3%Mo–0.22%N), which is a typical type of DSS, was annealed at 1473 K for up to 36 ks in air. The microstructure of UNS S32101 consisted of austenite/ferrite phases, the ratio of which was 50:50 at room temperature. After oxidation, Cr, Mn-oxide formed predominantly. The metal substrate beneath the scale changed mostly to ferrite. In the same region, depletion of Mn and N concentrations resulted. The decrease in Mn was due to the formation of Cr, Mn-oxide. In addition, it was revealed that N content of the metal substrate decreased due to the formation of N2 gas along with the depletion of Mn. It was assumed that the decrease in Mn and N, which are austenite-stabilized elements, led to an increase in ferrite in the depletion area of Mn and N. From this result, it was expected that the compositional changes in the Mn/N depletion area were caused by the oxidation of steel.

Development and Application of New Design Method by High-Strength Composite Material - Fusing of Optimum Strength Evaluation and Product Design

2013 ◽  
Vol 372 ◽  
pp. 17-20 ◽  
Author(s):  
Haruhiko Iida ◽  
Hidetoshi Sakamoto ◽  
Yoshifumi Ohbuchi
Keyword(s):  
Composite Material ◽  
Carbon Fiber ◽  
Product Design ◽  
Design Method ◽  
Target Material ◽  
High Strength ◽  
Fiber Glass ◽  
Strength Evaluation ◽  
Fiber Reinforced Materials ◽  
Manufacturing Methods

The purpose of this research is the development of new design method for integrating the optimum strength evaluation and the product design which can make the best use of material's characteristics obtained by the experiment and the analysis. Further we do design using high-strength composite material with this developed concept which is different from conventional design. First, to establish this design method of high-strength materials, we examined these materials characteristics and manufacturing methods and the commercialized products. As this research target material, we focus the fiber reinforced materials such as composite with carbon fiber, glass fiber and aramid fiber. Above all, we marked the carbon fiber which has the high specific tensile strength, wear resistance, heat conductivity and conductance. Here, we introduce the fundamental design concept which makes the best use of the design with enough strength.

Sign in / Sign up

Export Citation Format

Share Document