Efficacy of Ultraviolet-C Devices for the Disinfection of Personal Protective Equipment Fabrics and N95 Respirators

2021 ◽  
Vol 126 ◽  
Author(s):  
Kumari Moothedath Chandran ◽  
Ramamurthy Praveen C. ◽  
Kawkab Kanjo ◽  
Rohan Narayan ◽  
Raghu Menon
Keyword(s):  
Personal Protective Equipment ◽  
Protective Equipment ◽  
Ultraviolet C ◽  
N95 Respirators

scholarly journals Ultraviolet-C as a Viable Reprocessing Method for Disposable Masks and Filtering Facepiece Respirators

Polymers ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 801
Author(s):  
Talita Nicolau ◽  
Núbio Gomes Filho ◽  
Andrea Zille
Keyword(s):  
Literature Review ◽  
Systematic Literature Review ◽  
Personal Protective Equipment ◽  
State Of The Art ◽  
Protective Equipment ◽  
Multiple Methods ◽  
Ultraviolet C ◽  
Single Use ◽  
Uv C ◽  
New Strategies

In normal conditions, discarding single-use personal protective equipment after use is the rule for its users due to the possibility of being infected, particularly for masks and filtering facepiece respirators. When the demand for these protective tools is not satisfied by the companies supplying them, a scenario of shortages occurs, and new strategies must arise. One possible approach regards the disinfection of these pieces of equipment, but there are multiple methods. Analyzing these methods, Ultraviolet-C (UV-C) becomes an exciting option, given its germicidal capability. This paper aims to describe the state-of-the-art for UV-C sterilization in masks and filtering facepiece respirators. To achieve this goal, we adopted a systematic literature review in multiple databases added to a snowball method to make our sample as robust as possible and encompass a more significant number of studies. We found that UV-C’s germicidal capability is just as good as other sterilization methods. Combining this characteristic with other advantages makes UV-C sterilization desirable compared to other methods, despite its possible disadvantages.

scholarly journals COVID-19 global pandemic planning: Dry heat incubation and ambient temperature fail to consistently inactivate SARS-CoV-2 on N95 respirators

2020 ◽  
pp. 153537022097781
Author(s):  
Douglas J Perkins ◽  
Robert A Nofchissey ◽  
Chunyan Ye ◽  
Nathan Donart ◽  
Alison Kell ◽  
...  
Keyword(s):  
Ambient Temperature ◽  
Personal Protective Equipment ◽  
Healthcare Personnel ◽  
Protective Equipment ◽  
Experimental Conditions ◽  
Dry Heat ◽  
Global Pandemic ◽  
Individual Site ◽  
Pandemic Planning ◽  
N95 Respirators

The ongoing pandemic of the novel severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has placed a substantial strain on the supply of personal protective equipment, particularly the availability of N95 respirators for frontline healthcare personnel. These shortages have led to the creation of protocols to disinfect and reuse potentially contaminated personal protective equipment. A simple and inexpensive decontamination procedure that does not rely on the use of consumable supplies is dry heat incubation. Although reprocessing with this method has been shown to maintain the integrity of N95 respirators after multiple decontamination procedures, information on the ability of dry heat incubation to inactivate SARS-CoV-2 is largely unreported. Here, we show that dry heat incubation does not consistently inactivate SARS-CoV-2-contaminated N95 respirators, and that variation in experimental conditions can dramatically affect viability of the virus. Furthermore, we show that SARS-CoV-2 can survive on N95 respirators that remain at room temperature for at least five days. Collectively, our findings demonstrate that dry heat incubation procedures and ambient temperature for five days are not viable methods for inactivating SARS-CoV-2 on N95 respirators for potential reuse. We recommend that decontamination procedures being considered for the reuse of N95 respirators be validated at each individual site and that validation of the process must be thoroughly conducted using a defined protocol.

scholarly journals Decontamination methods of personal protective equipment for repeated utilization in medical/surgical settings

2020 ◽  
Vol 8 (34) ◽  
pp. 27-39
Author(s):  
Abdurrahman Kharbat ◽  
Adin Mizer ◽  
Mimi Zumwalt
Keyword(s):  
Personal Protective Equipment ◽  
Healthcare Workers ◽  
Protective Equipment ◽  
Pilot Studies ◽  
Medical Supplies ◽  
Policy Statements ◽  
Repeated Use ◽  
Meta Analyses ◽  
N95 Respirators ◽  
Made In

The COVID-19 pandemic has affected citizens and healthcare workers worldwide due to a number of important factors. The transmission of the SARS CoV-2 microorganism, the pathogen that causes COVID-19 infection, occurs through droplet and aerosol spread due to coughs and sneezes from infected patients. A panicked public began hoarding medical supplies and personal protective equipment (PPE), leaving healthcare workers to care for patients without adequate protection. A literature review was conducted to better understand the options available to hospital and healthcare system administrators as they develop necessary protocols for the conservation and possible reuse of PPE. This review is based upon the peer-reviewed studies of various scientific investigators, biotechnology researchers, governmental agency health officials, including meta-analyses, preliminary/pilot studies, and policy statements. Current findings indicate that extended usage of N95 respirators is practical since there are methods available for the decontamination/repeated use of N95 respirators. In evaluating the efficacy of such methods, the safety of healthcare workers is important in deciding which method to recommend. Available evidence supports the use of the Bioquell Hydrogen Peroxide Vapor (HPV) system for decontaminating N95 respirators. Information on other PPE will also be discussed about more specific items. Informed decisions regarding the policies of hospitals and healthcare systems must be considered, and with the safety of healthcare workers in mind, both factors influenced the recommendations made in this comprehensive review.

scholarly journals COVID-19 crisis prompting innovation in addressing personal protective equipment shortage

2020 ◽  
Vol 7 (1) ◽  
pp. 69-72 ◽  
Author(s):  
Kripa Rajak
Keyword(s):  
Health Care ◽  
Supply Chain ◽  
Personal Protective Equipment ◽  
Health Care Systems ◽  
Protective Equipment ◽  
Remote Work ◽  
Care Systems ◽  
N95 Respirators ◽  
Silver Lining

Coronavirus disease 2019 (COVID-19) has swept across the globe overwhelming health care systems and disrupting supply chain of personal protective equipment (PPE) like gloves, surgical face masks, goggles, face shields, N95 respirators and gowns. Surging demand, panic buying, hoarding, and misuse of PPE has led to substantial jump in its demand. Despite the terrible impact of COVID-19, if there’s any silver lining to this crisis, it is the rapidity at which communities are moving toward innovation in not just medicine and remote work but also in ways to mitigate the growing PPE shortages.

scholarly journals A Scalable Method for Ultraviolet C Disinfection of Surgical Facemasks Type IIR and Filtering Facepiece Particle Respirators 1 and 2

2020 ◽  
Author(s):  
Ivar Lede ◽  
Karina Nolte ◽  
René Kroes
Keyword(s):  
Personal Protective Equipment ◽  
Protective Equipment ◽  
Log Reduction ◽  
Ultraviolet C ◽  
Transmission Measurements

Due to the SARS-CoV-2 pandemic a shortage of personal protective equipment, including surgical facemasks and Filtering Facepiece Particle Respirators has occurred. SARS-CoV-2 has a 79,5-82% homology to SARS-CoV-2. The SARS-CoV UVC sensitivity is described in literature. We have performed UVC transmission measurements of surgical facemasks and respirators. In addition, we performed UVC disinfection experiments of S. aureus with surgical facemasks and respirators. Results show that we can achieve an 8-log reduction of S. aureus in the inner layers of FFP1 respirators and the exterior of surgical facemasks. Furthermore, we showed a 7-log reduction of S. aureus in the inner layers of FFP2 respirators. We conclude that UVC disinfection is an effective, safe and scalable method for reuse of surgical facemask and respirators.

scholarly journals Analysis of SteraMist ionized hydrogen peroxide technology in the sterilization of N95 respirators and other PPE: a quality improvement study

2020 ◽  
Author(s):  
Avilash K. Cramer ◽  
Deborah Plana ◽  
Helen Yang ◽  
Mary M. Carmack ◽  
Enze Tian ◽  
...  
Keyword(s):  
Hydrogen Peroxide ◽  
Personal Protective Equipment ◽  
Occupational Safety ◽  
Medical Center ◽  
Academic Medical Center ◽  
Biological Indicator ◽  
Protective Equipment ◽  
Pre Treatment ◽  
Environment Chamber ◽  
N95 Respirators

AbstractObjectiveThe COVID-19 pandemic has led to widespread shortages of personal protective equipment (PPE) for healthcare workers, including filtering facepiece respirators (FFRs) such as N95 masks. These masks are normally intended for single use, but their sterilization and subsequent reuse could substantially mitigate a world-wide shortage.DesignQuality assurance.SettingA sealed environment chamber installed in the animal facility of an academic medical center.InterventionsOne to five sterilization cycles using ionized hydrogen peroxide (iHP), generated by SteraMist® equipment (TOMI; Frederick, MD).Main outcome measuresPersonal protective equipment, including five N95 mask models from three manufacturers, were evaluated for efficacy of sterilization following iHP treatment (measured with bacterial spores in standard biological indicator assemblies). Additionally, N95 masks were assessed for their ability to efficiently filter particles down to 0.3µm and for their ability to form an airtight seal using a quantitative fit test. Filtration efficiency was measured using ambient particulate matter at a university lab and an aerosolized NaCl challenge at a National Institute for Occupational Safety and Health (NIOSH) pre-certification laboratory.ResultsThe data demonstrate that N95 masks sterilized using SteraMist iHP technology retain function up to five cycles, the maximum number tested to date. Some but not all PPE could also be sterilized using an iHP environmental chamber, but pre-treatment with a handheld iHP generator was required for semi-enclosed surfaces such as respirator hoses.ConclusionsA typical iHP environment chamber with a volume of ~80 m3 can treat ~7000 masks per day, as well as other items of PPE, making this an effective approach for a busy medical center.

scholarly journals UV Sterilization of Personal Protective Equipment with Idle Laboratory Biosafety Cabinets During the COVID-19 Pandemic

2020 ◽  
Author(s):  
◽  
Kyle J. Card ◽  
Dena Crozier ◽  
Andrew Dhawan ◽  
Mina N. Dinh ◽  
...  
Keyword(s):  
Uv Radiation ◽  
Personal Protective Equipment ◽  
Cleveland Clinic ◽  
The United States ◽  
Alternative Methods ◽  
Common Element ◽  
Protective Equipment ◽  
Surgical Masks ◽  
N95 Respirators ◽  
Uv C

ABSTRACTDISCLAIMERThis article does not represent the official recommendation of the Cleveland Clinic or Case Western Reserve University School of Medicine, nor has it yet been peer reviewed. We are releasing it early, pre-peer review, to allow for quick dissemination/vetting by the scientific/clinical community given the necessity for rapid conservation of personal protective equipment (PPE) during this dire global situation. We welcome feedback from the community.Personal protective equipment (PPE), including face shields, surgical masks, and N95 respirators, is crucially important to the safety of both patients and medical personnel, particularly in the event of an infectious pandemic. As the incidence of Coronavirus Disease (COVID-19) increases exponentially in the United States and worldwide, healthcare provider demand for these necessities is currently outpacing supply. As such, strategies to extend the lifespan of the supply of medical equipment as safely as possible are critically important. In the midst of the current pandemic, there has been a concerted effort to identify viable ways to conserve PPE, including decontamination after use. Some hospitals have already begun using UV-C light to decontaminate N95 respirators and other PPE, but many lack the space or equipment to implement existing protocols. In this study, we outline a procedure by which PPE may be decontaminated using ultraviolet (UV) radiation in biosafety cabinets (BSCs), a common element of many academic, public health, and hospital laboratories, and discuss the dose ranges needed for effective decontamination of critical PPE. We further discuss obstacles to this approach including the possibility that the UV radiation levels vary within BSCs. Effective decontamination of N95 respirator masks or surgical masks requires UV-C doses of greater than 1 Jcm−2, which would take a minimum of 4.3 hours per side when placing the N95 at the bottom of the BSCs tested in this study. Elevating the N95 mask by 48 cm (so that it lies 19 cm from the top of the BSC) would enable the delivery of germicidal doses of UV-C in 62 minutes per side. Effective decontamination of face shields likely requires a much lower UV-C dose, and may be achieved by placing the face shields at the bottom of the BSC for 20 minutes per side. Our results are intended to provide support to healthcare organizations looking for alternative methods to extend their reserves of PPE. We recognize that institutions will require robust quality control processes to guarantee the efficacy of any implemented decontamination protocol. We also recognize that in certain situations such institutional resources may not be available; while we subscribe to the general principle that some degree of decontamination is preferable to re-use without decontamination, we would strongly advise that in such cases at least some degree of on-site verification of UV dose delivery be performed.

scholarly journals Determining the source of transmission of SARS-CoV-2 infection in a healthcare worker

2020 ◽  
Author(s):  
Nasia Safdar ◽  
Gage K. Moreno ◽  
Katarina M. Braun ◽  
Thomas C. Friedrich ◽  
David H. O’Connor
Keyword(s):  
Infection Control ◽  
Healthcare Worker ◽  
Personal Protective Equipment ◽  
Healthcare Workers ◽  
Total Population ◽  
Protective Equipment ◽  
Hospital Infection Control ◽  
Risk Of Exposure ◽  
N95 Respirators ◽  
Cumulative Prevalence

BackgroundHealthcare workers (HCWs) are at the frontlines of the COVID-19 pandemic and are at risk of exposure to SARS-CoV-2 infection from their interactions with patients and in the community (1, 2). Limited availability of recommended personal protective equipment (PPE), in particular N95 respirators, has fueled concerns about whether HCWs are adequately protected from exposure while caring for patients. Understanding the source of SARS-CoV-2 infection in a HCW – the community or the healthcare system – is critical for understanding the effectiveness of hospital infection control and PPE practices. In Dane County, Wisconsin, community prevalence of SARS-CoV-2 is relatively low (cumulative prevalence of ~0.06% – positive cases / total population in Dane county as of April 17). Although SARS-CoV-2 infections in HCWs are often presumed to be acquired during the course of patient care, there are few reports unambiguously identifying the source of acquisition.ObjectiveTo determine the source of transmission of SARS-CoV-2 in a healthcare worker.

scholarly journals Moldable Mask: A Reusable, Hot Water Moldable, Additively Manufactured Mask to Be Used as an N95 Alternative

Materials ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 7082
Author(s):  
Erica Martelly ◽  
Charles Li ◽  
Kenji Shimada
Keyword(s):  
Personal Protective Equipment ◽  
Early Stage ◽  
Hot Water ◽  
Protective Equipment ◽  
Viable Option ◽  
High Demand ◽  
Mask Design ◽  
3D Printed ◽  
N95 Respirators ◽  
At Home

There has been high demand for personal protective equipment (PPE) during the COVID-19 pandemic, especially N95 respirators. Unfortunately, at the early stage of the pandemic, the supply could not meet the demand for N95 respirators, leading to a shortage and unsafe reuse of this form of PPE. We developed the Moldable Mask to ease the demand for N95 respirators by creating a 3D-printed mask that uses a piece of N95 material as a filter. A sheet of N95 material could be used or one N95 respirator to be turned into two masks. The main feature of the mask is the ability to easily mold it in hot water to create a custom fit for each user. It can also be easily assembled at home with affordable materials. The final mask design was qualitatively fit tested on 13 subjects, with all subjects showing an improvement in fit with the hot water molding technique and 10 (77%) subjects passing the fit test. This shows that the Moldable Mask is a viable option for a safe, affordable N95 alternative when N95 mask supply is strained.

Sign in / Sign up

Export Citation Format

Share Document