scholarly journals Dispersion and Burning Behavior of Hydrogen Released in a Full-Scale Residential Garage in the Presence and Absence of Conventional Automobiles – Supplemental Video Materials

2018 ◽  
Vol 123 ◽  
Author(s):  
William M. Pitts ◽  
Jiann C. Yang ◽  
Kuldeep Prasad ◽  
Marco Fernandez
Keyword(s):  
High Speed ◽  
Full Scale ◽  
High Definition ◽  
Burning Behavior ◽  
Presence And Absence

The supplemental materials reported here provide standard high-definition (HD), high-speed, and infrared videos of the 13 full-scale hydrogen dispersion and burning experiments in a full-scale residential garage.

Slam load estimation for high-speed catamarans in irregular head seas by full-scale computational fluid dynamics

2021 ◽  
Vol 234 ◽  
pp. 109160
Author(s):  
Islam Almallah ◽  
Jason Ali-Lavroff ◽  
Damien S. Holloway ◽  
Michael R. Davis
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
High Speed ◽  
Full Scale ◽  
Load Estimation

New Energy-Absorbing High-Speed Safety Barrier

2003 ◽  
Vol 1851 (1) ◽  
pp. 53-64 ◽  
Author(s):  
John D. Reid ◽  
Ronald K. Faller ◽  
Jim C. Holloway ◽  
John R. Rohde ◽  
Dean L. Sicking
Keyword(s):  
High Speed ◽  
Steel Tube ◽  
Full Scale ◽  
Element Analysis ◽  
Dynamic Component ◽  
Testing Program ◽  
Roadside Safety ◽  
New Energy ◽  
University Of Nebraska Lincoln ◽  
Energy Absorbing

For many years, containment for errant racing vehicles traveling on oval speedways has been provided through rigid, concrete containment walls placed around the exterior of the track. However, accident experience has shown that serious injuries and fatalities may occur through vehicular impacts into these nondeformable barriers. Because of these injuries, the Indy Racing League and the Indianapolis Motor Speedway, later joined by the National Association for Stock Car Auto Racing (NASCAR), sponsored the development of a new barrier system by the Midwest Roadside Safety Facility at the University of Nebraska–Lincoln to improve the safety of drivers participating in automobile racing events. Several barrier prototypes were investigated and evaluated using both static and dynamic component testing, computer simulation modeling with LS-DYNA (a nonlinear finite element analysis code), and 20 full-scale vehicle crash tests. The full-scale crash testing program included bogie vehicles, small cars, and a full-size sedan, as well as Indy Racing League open-wheeled cars and NASCAR Winston Cup cars. A combination steel tube skin and foam energy-absorbing barrier system, referred to as the SAFER (steel and foam energy reduction) barrier, was successfully developed. Subsequently, the SAFER barrier was installed at the Indianapolis Motor Speedway in advance of the running of the 2002 Indianapolis 500 race. From the results of the laboratory testing program as well as analysis of the accidents into the SAFER barrier occurring during practice, qualification, and the race, the SAFER barrier has been shown to provide improved safety for drivers impacting the outer walls.

Performance Analysis of 60GHz Cooperative Communication System with Directional Transmission

2014 ◽  
Vol 1049-1050 ◽  
pp. 2020-2023
Author(s):  
Min Wang ◽  
Hao Zhang
Keyword(s):  
Performance Analysis ◽  
Cooperative Communication ◽  
Communication System ◽  
High Speed ◽  
Relay Node ◽  
Network Connectivity ◽  
Home Networks ◽  
High Definition ◽  
Optimal Position ◽  
Directional Transmission

60GHz wireless communication is a promising technology for multi-gigabit communication in future home networks. It brings possibility of achieving in-door high-definition multimedia applications with high-speed and low-delay experience. However, to maintain the network connectivity with 60GHz links, which are susceptible to propagation and penetration losses, is a major challenge. The quality and robustness of 60GHz links can be effectively improved by employing relay nodes or cooperative nodes in the network. In this paper, taking into consideration the directional transmission character of 60GHz system, we conduct performance analysis and simulations for the 60GHz cooperative communication system. Two cooperative forwarding approaches are analyzed and compared, and the optimal position of the cooperative relay node is proposed.

Calculation method of dynamic loads spectrum and effects on fatigue damage of a full-scale carbody for high-speed trains

2019 ◽  
Vol 58 (7) ◽  
pp. 1037-1056 ◽  
Author(s):  
Yaohui Lu ◽  
Wei Bi ◽  
Xing Zhang ◽  
Jing Zeng ◽  
Tianli Chen ◽  
...  
Keyword(s):  
Fatigue Damage ◽  
Calculation Method ◽  
High Speed ◽  
Full Scale ◽  
Dynamic Loads ◽  
High Speed Trains

Full-Scale Motions Of A Large High-Speed Catamaran: The Influence Of Wave Environment, Speed And Ride Control System

2012 ◽  
Vol 154 (A3) ◽  
Keyword(s):  
Control System ◽  
Time Domain ◽  
High Speed ◽  
Full Scale ◽  
Pitch Motion ◽  
Motion Response ◽  
Beam Seas ◽  
Ride Control ◽  
Ride Control System ◽  
Vessel Speed

To assess the behaviour of large high-speed catamarans in severe seas, extensive full-scale trials were conducted by the U.S. Navy on an INCAT Tasmania built vessel in the North Sea and North Atlantic region. Systematic testing was done for different speeds, sea states and ride control settings at different headings. Collected data has been used to characterise the ship’s motions and seakeeping performance with respect to wave environment, vessel speed and ride control system. Motion response amplitude operators were derived and compared with results from a two-dimensional Green function time-domain strip theory seakeeping prediction method. An increase of motion response with increasing vessel speed and a decrease with the vessel moving from head to beam seas was found. In higher sea states and headings ahead of beam seas an increasing influence of the centre bow on pitch motion damping was found. Significant motion RAO reduction was also found when the ride control system was active. Its effectiveness increased at higher speeds and contributed to heave and pitch motion RAO reduction. Predicted motion magnitudes with the time domain seakeeping code were consistent with the measured motion responses, but maximum heave was predicted at a rather higher frequency than was evident in the trials.

Prediction of drag and lift forces of a high-speed vessel at full scale by CFD-based GEOSIM method

2022 ◽  
pp. 147509022110707
Author(s):  
Ugur Can ◽  
Sakir Bal
Keyword(s):  
High Speed ◽  
Full Scale ◽  
Navier Stokes ◽  
Drag Forces ◽  
Fluid Body ◽  
Unsteady Rans ◽  
Lift Forces ◽  
Drag And Lift ◽  
Lift And Drag ◽  
Model Family

In this study, it was aimed to obtain an accurate extrapolation method to compute lift and drag forces of high-speed vessels at full-scale by using CFD (Computational Fluid Dynamics) based GEOSIM (GEOmetrically SIMilar) method which is valid for both fully planing and semi-planing regimes. Athena R/V 5365 bare hull form with a skeg which is a semi-displacement type of high-speed vessel was selected with a model family for hydrodynamic analyses under captive and free to sinkage/trim conditions. Total drag and lift forces have been computed for a generated GEOSIM family of this form at three different model scales and full-scale for Fr = 0.8 by an unsteady RANS (Reynolds Averaged Navier–Stokes) solver. k–ε turbulence model was used to simulate the turbulent flow around the hulls, and both DFBI (Dynamic Fluid Body Interaction) and overset mesh technique were carried out to model the heave and pitch motions under free to sinkage/trim condition. The computational results of the model family were used to get “drag-lift ratio curve” for Athena hull at a fixed Fr number and so the corresponding results at full scale were predicted by extrapolating those of model scales in the form of a non-dimensional ratios of drag-lift forces. Then the extrapolated full-scale results calculated by modified GEOSIM method were compared with those of full-scale CFD and obtained by Froude extrapolation technique. The modified GEOSIM method has been found to be successful to compute the main forces (lift and drag) acting on high-speed vessels as a single coefficient at full scale. The method also works accurately both under fully and semi-planing conditions.

Experimental Development of On-Line Flame Transfer Function Measurements for Fielded Gas Turbines

2021 ◽  
Author(s):  
Austin Matthews ◽  
Anna Cobb ◽  
Subodh Adhikari ◽  
David Wu ◽  
Tim Lieuwen ◽  
...  
Keyword(s):  
Transfer Function ◽  
Heat Release ◽  
Gas Turbine ◽  
Gas Turbines ◽  
High Speed ◽  
Transfer Functions ◽  
Full Scale ◽  
Fuel Injector ◽  
Experimental Development ◽  
On Line

Abstract Understanding thermoacoustic instabilities is essential for the reliable operation of gas turbine engines. To complicate this understanding, the extreme sensitivity of gas turbine combustors can lead to instability characteristics that differ across a fleet. The capability to monitor flame transfer functions in fielded engines would provide valuable data to improve this understanding and aid in gas turbine operability from R&D to field tuning. This paper presents a new experimental facility used to analyze performance of full-scale gas turbine fuel injector hardware at elevated pressure and temperature. It features a liquid cooled, fiber-coupled probe that provides direct optical access to the heat release zone for high-speed chemiluminescence measurements. The probe was designed with fielded applications in mind. In addition, the combustion chamber includes an acoustic sensor array and a large objective window for verification of the probe using high-speed chemiluminescence imaging. This work experimentally demonstrates the new setup under scaled engine conditions, with a focus on operational zones that yield interesting acoustic tones. Results include a demonstration of the probe, preliminary analysis of acoustic and high speed chemiluminescence data, and high speed chemiluminescence imaging. The novelty of this paper is the deployment of a new test platform that incorporates full-scale engine hardware and provides the ability to directly compare acoustic and heat release response in a high-temperature, high-pressure environment to determine the flame transfer functions. This work is a stepping-stone towards the development of an on-line flame transfer function measurement technique for production engines in the field.

Sign in / Sign up

Export Citation Format

Share Document