scholarly journals Static Characteristics of Four-Lobe Hydrodynamic Journal Bearings with Bottom Sliding Surface Inclined Due to Manufacturing Errors

2019 ◽  
Vol 54 (1) ◽  
pp. 103-110 ◽  
Author(s):  
Toshikazu Fujino ◽  
Katsumi Iwamoto ◽  
Tatsuhiro Jibiki ◽  
Masajiro Abe
Keyword(s):  
Journal Bearings ◽  
Sliding Surface ◽  
Static Characteristics ◽  
Manufacturing Errors

Effects of manufacturing errors on the static characteristics of aerostatic journal bearings with porous restrictor

2017 ◽  
Vol 115 ◽  
pp. 246-260 ◽  
Author(s):  
Hailong Cui ◽  
Yang Wang ◽  
Xiaobin Yue ◽  
Ming Huang ◽  
Wei Wang
Keyword(s):  
Journal Bearings ◽  
Static Characteristics ◽  
Manufacturing Errors

STATIC CHARACTERISTICS OF OFFSET 8-LOBE JOURNAL BEARINGS

Tribologia ◽  
2021 ◽  
Vol 295 (1) ◽  
pp. 39-51
Author(s):  
Stanisław Strzelecki
Keyword(s):  
Laminar Flow ◽  
Equilibrium Position ◽  
Iterative Procedure ◽  
Journal Bearing ◽  
Journal Bearings ◽  
Diameter Ratio ◽  
Static Characteristics ◽  
Oil Film ◽  
Cooling Conditions ◽  
Grinding Machines

The 8-lobe journal bearings have found application in the bearing systems of spindles of grinding machines. The design of bearings and the large number of lobes and oil grooves assures good cooling conditions of bearing. These bearings can be manufactured as the bearings with cylindrical, non-continuous operating surfaces separated by six lubricating grooves, bearings with the pericycloidal shape of the bearing bore, and as offset journal bearing. This paper presents the results of the computation of static characteristics of an offset 8-lobe journal bearing operating under the conditions of an aligned axis of journal and bush, adiabatic oil film, and at the static equilibrium position of journal. Different values of bearing length to diameter ratio, relative clearance, and lobe relative clearance were assumed. Reynolds' energy and viscosity equations were solved by means of an iterative procedure. Adiabatic oil film, laminar flow in the bearing gap, and aligned orientation of journal in the bearing were considered.

An improved lumped parameter method for calculating static characteristics of multi-recess hydrostatic journal bearings

2019 ◽  
Vol 234 (2) ◽  
pp. 301-310
Author(s):  
Yongtao Zhang ◽  
Shijie Yu ◽  
Changhou Lu ◽  
Haixia Zhao ◽  
Peng Liang
Keyword(s):  
Total Pressure ◽  
Control Volume ◽  
Journal Bearings ◽  
Parameter Method ◽  
Static Characteristics ◽  
Application Range ◽  
Continuity Equations ◽  
Pressure Distributions ◽  
Lumped Parameter ◽  
Lumped Parameter Method

This paper proposes an improved lumped parameter method for calculating the static characteristics of multi-recess hydrostatic journal bearings. The improved lumped parameter method can estimate the total pressure distribution in the circumferential direction by introducing control volume in the middle of each inter-recess land, and utilizing the flow continuity equations for each recess and each control volume with the assumption that the pressure distributions are parabolic on the inter-recess land. Then the recess pressure and the fluid film force can be calculated. The calculation accuracy of the improved lumped parameter method and the traditional lumped parameter method is comparatively discussed under different eccentricity ratios and wrap angles of the recess. The results show that the improved lumped parameter method has higher calculation accuracy and wider application range.

Sign in / Sign up

Export Citation Format

Share Document