scholarly journals An improved protocol for natural convective drying of pumpkin

2021 ◽  
Vol 48 (1) ◽  
pp. 29-39
Author(s):  
Hakim Semai ◽  
Amor Bouhdjar ◽  
Aissa Amari
Keyword(s):  
High Temperature ◽  
Effective Diffusivity ◽  
Convective Drying ◽  
Agricultural Product ◽  
Diffusivity Coefficient ◽  
Drying Time ◽  
Thin Layer Drying ◽  
Different Temperatures ◽  
Energy Consuming ◽  
Drying Curves

The most effective way to preserve agricultural product is drying. However, vegetable drying is an energy-consuming procedure. Convective drying is the mode considered in this work. The study intends to explore a new way of pumpkin drying, which reduces drying time and minimizes heat consumption. The study considers pumpkin thin slices and pumpkin samples with cubic shape. The samples were subjected to free convection airflow at different temperatures (40 °C, 46 °C, 52 °C, and 60 °C) for each run. A varying airflow temperature was also considered. Airflow velocity was generated by buoyancy forces for each temperature. Drying curves were plotted and fitted to the widely used thin-layer drying models. The modified Page model came out as the best-fitted model. The effective diffusivity coefficient was determined for each case using the slope moisture curve. It appeared that diffusivity was high and drying time was short, for high temperature. Drying processes for slice configuration and cube configuration showed that the latter was more efficient. When applying the regime of increasing temperatures to the cubic samples, data analysis showed that effective diffusivity was higher during the third step in comparison to all the other drying temperatures and the total drying time was similar to that obtained at drying regime on high temperature. With this procedure, the final consumed energy was much less and the time was shorter.

scholarly journals Improved protocol for natural convection pumpkin drying

2021 ◽  
pp. 29-39
Author(s):  
Hakim Semai ◽  
Amor Bouhdjar ◽  
Aissa Amari
Keyword(s):  
High Temperature ◽  
Effective Diffusivity ◽  
Convective Drying ◽  
Agricultural Product ◽  
Diffusivity Coefficient ◽  
Drying Time ◽  
Thin Layer Drying ◽  
Different Temperatures ◽  
Energy Consuming ◽  
Drying Curves

The most effective way to preserve agricultural product is drying. However, vegetable drying is an energy-consuming procedure. Convective drying is the mode considered in this work. The study intends to explore a new way of pumpkin drying, which reduces drying time and minimizes heat consumption. The study considers pumpkin thin slices and pumpkin samples with cubic shape. The samples were subjected to free convection airflow at different temperatures (40 °C, 46 °C, 52 °C, and 60 °C) for each run. A varying airflow temperature was also considered. Airflow velocity was generated by buoyancy forces for each temperature. Drying curves were plotted and fitted to the widely used thin-layer drying models. The modified Page model came out as the best-fitted model. The effective diffusivity coefficient was determined for each case using the slope moisture curve.  It appeared that diffusivity was high and drying time was short, for high temperature. Drying processes for slice configuration and cube configuration showed that the latter was more efficient. When applying the regime of increasing temperatures to the cubic samples, data analysis showed that effective diffusivity was higher during the third step in comparison to all the other drying temperatures and the total drying time was similar to that obtained at drying regime on high temperature. With this procedure, the final consumed energy was much less and the time was shorter.

scholarly journals Mathematical modeling of pequi pulp drying and effective diffusivity determination

2017 ◽  
Vol 21 (7) ◽  
pp. 493-498 ◽  
Author(s):  
Elisabete P. de Sousa ◽  
Rossana M. F. de Figueirêdo ◽  
Josivanda P. Gomes ◽  
Alexandre J. de M. Queiroz ◽  
Deise S. de Castro ◽  
...  
Keyword(s):  
Experimental Data ◽  
Effective Diffusivity ◽  
Drying Kinetics ◽  
Convective Drying ◽  
Drying Time ◽  
Air Speed ◽  
Drying Curves ◽  
Increasing Temperature ◽  
Kinetics Of ◽  
Best Fit

ABSTRACT The aim of this work was to study the drying kinetics of pequi pulp by convective drying at different conditions of temperature (50, 60, 70 and 80 °C) and thickness (0.5, 1.0 and 1.5 cm) at the air speed of 1.0 m s-1, with no addition of adjuvant. The experimental data of pequi pulp drying kinetics were used to plot drying curves and fitted to the models: Midilli, Page, Henderson & Pabis and Newton. Effective diffusivity was calculated using the Fick’s diffusion model for a flat plate. It was found that, with increasing thickness, the drying time increased and, with increasing temperature, the drying time was reduced. The Midilli model showed the best fit to the experimental data of pequi pulp drying at all temperatures and thicknesses, presenting higher coefficients of determination (R2), indicating that this model satisfactorily represents the pequi pulp drying phenomenon. There was a trend of increase in the effective diffusivity with the increase in pulp layer thickness and temperature.

scholarly journals Kinetic parameters identification of conductive enhanced hot air drying process of food waste

2020 ◽  
pp. 223-223
Author(s):  
Mihailo Milanovic ◽  
Mirko Komatina ◽  
Ivan Zlatanovic ◽  
Nebojsa Manic ◽  
Dragi Antonijevic
Keyword(s):  
Food Industry ◽  
Convective Drying ◽  
Diffusivity Coefficient ◽  
Drying Method ◽  
Drying Process ◽  
Air Velocity ◽  
Drying Time ◽  
Hot Air ◽  
Air Temperatures ◽  
Drying Curves

The efficient utilization of waste from food industry is possible after thermal treatment of the material. This treatment should be economically feasible and compromise the energy efficient drying process. The main goal of this investigation is to determine drying characteristics of nectarine pomace as a waste from food industry. The measurements were performed in an experimental dryer by combined conductive-convective drying method with disk-shaped samples of 5, 7 and 10mm thickness and 100 mm in diameter at the air temperatures of 30, 40, 50, 60 and 70oC, hot plate temperatures of 50, 60 an 70oC and air velocity of 1.5 m/s. The drying curves were compared to a few semi-theoretical mathematical models. The Logarithmic model showed the best correspondence. On the basis of experiments, it is determined that the drying process takes place in a falling rate period and it is accepted that the main mechanism of moisture removal is diffusion. The effective coefficient of diffusion was determined using experimental results by calculating the slope of the drying curves. Drying time and equilibrium moisture are determined for each experiment. Analysis of drying curves showed that the conductive-enhanced drying method reduces drying times and increases the diffusivity coefficient. The character of drying rate curves for conductive-enhanced drying was analyzed and compared with pure convective drying of nectarine pomace.

scholarly journals Modeling kinetics of convective drying of Curcuma longa L.

2021 ◽  
Vol 25 (3) ◽  
pp. 197-202
Author(s):  
Maria S. Lima ◽  
Samuel V. Ferreira ◽  
Lígia C. de M. Silva ◽  
Daniel E. C. Oliveira ◽  
Paulo V. T. Leão ◽  
...  
Keyword(s):  
Diffusion Coefficients ◽  
Curcuma Longa ◽  
Effective Diffusion ◽  
Convective Drying ◽  
Linear Regression Models ◽  
Drying Time ◽  
Effective Diffusion Coefficients ◽  
Different Temperatures ◽  
Air Ventilation ◽  
Drying Curves

ABSTRACT This study aimed to determine drying curves of land saffron (Curcuma longa L.) rhizomes at different temperatures and ventilation conditions to adjust non-linear regression models, and to calculate effective diffusion coefficients and activation energies. Saffron rhizomes were randomly collected in natura with a hoe from the soil in Rio Verde, Goiás, Brazil. They were subsequently sized, sanitized, and sliced into 2.63 ± 0.1 mm thick sections. Rhizomes were dried in an oven with forced air ventilation at 45, 55, 65 and 75 °C for 18, 14, 10 and 9 hours, respectively. As the temperature increased, drying time was reduced. Consequently, moisture content also decreased, facilitating the drying process by decreasing the energy required to remove water molecules. Among the analyzed models, the Midilli model was best adjusted to the data under different drying air conditions. Effective diffusion coefficients (D) were 9.17 × 10-11, 13.33 × 10-11, 20.09 × 10-11, and 35.89 × 10-11 m2 s-1 at 45, 55, 65 and 75 °C, respectively, increasing with higher temperatures. Activation energy for liquid diffusion during drying was 21.186 kJ mol-1.

Mathematical Modeling and Experimental Study on Thin Layer Drying of Strawberry

2006 ◽  
Vol 2 (1) ◽  
Author(s):  
Ebru Kavak Akpinar ◽  
Yasar Bicer
Keyword(s):  
Mathematical Modeling ◽  
Thin Layer ◽  
Correlation Coefficient ◽  
Air Temperature ◽  
Moisture Transfer ◽  
Convective Drying ◽  
Drying Rate ◽  
Diffusivity Coefficient ◽  
Thin Layer Drying ◽  
Drying Curves

This paper presents mathematical modeling and the thin layer convective drying of strawberry. The experiments are conducted at drying air temperatures of 60, 75 and 85 deg.C in drying air velocities of 0.5, 1 and 1.5 m/s in a convective cyclone type dryer. The data of sample mass, temperature and velocity of the drying air were recorded continuously during each test. The experimental drying curves show only a falling drying rate period. The main factor in controlling the drying rate was found to be the drying air temperature. Also, the experimental drying curves obtained were fitted to eleven mathematical models. The Modified Page (I) drying model was found to satisfactorily describe the drying curves of strawberry with a correlation coefficient (R) of 0.98042, chi-square (2) of 0.0035 and root mean square error (RMSE) of 0.0588. The constants and coefficients of this model could be explained by the effect of drying air temperature and velocity with a correlation coefficient (R) of 0.998. The effective diffusivity coefficient of moisture transfer varied from 4.528x10-10 to 9.631x10-10 m2/s over the temperature and velocity range in this study.

scholarly journals Cherry Tomato Drying: Sun versus Convective Oven

Horticulturae ◽  
2021 ◽  
Vol 7 (3) ◽  
pp. 40
Author(s):  
Vincenzo Alfeo ◽  
Diego Planeta ◽  
Salvatore Velotto ◽  
Rosa Palmeri ◽  
Aldo Todaro
Keyword(s):  
Moisture Content ◽  
Initial Moisture Content ◽  
Drying Process ◽  
Drying Time ◽  
Oven Drying ◽  
Sun Drying ◽  
Different Temperatures ◽  
Final Water Content ◽  
Drying Curves ◽  
Drying Conditions

Solar drying and convective oven drying of cherry tomatoes (Solanum lycopersicum) were compared. The changes in the chemical parameters of tomatoes and principal drying parameters were recorded during the drying process. Drying curves were fitted to several mathematical models, and the effects of air temperature during drying were evaluated by multiple regression analyses, comparing to previously reported models. Models for drying conditions indicated a final water content of 30% (semidry products) and 15% (dry products) was achieved, comparing sun-drying and convective oven drying at three different temperatures. After 26–28 h of sun drying, the tomato tissue had reached a moisture content of 15%. However, less drying time, about 10–11 h, was needed when starting with an initial moisture content of 92%. The tomato tissue had high ORAC and polyphenol content values after convective oven drying at 60 °C. The dried tomato samples had a satisfactory taste, color and antioxidant values.

scholarly journals Improved Procedure for Natural Convection Garlic Drying

2020 ◽  
Vol 23 (2) ◽  
pp. 92-98
Author(s):  
Amor Bouhdjar ◽  
Hakim Semai ◽  
Amal Boukadoum ◽  
Sofiane Elmokretar ◽  
Azzedine Mazari ◽  
...  
Keyword(s):  
Effective Diffusivity ◽  
Diffusivity Coefficient ◽  
Solar Drying ◽  
Residual Moisture ◽  
Drying Temperature ◽  
Solar Systems ◽  
Energy Consuming ◽  
C 50 ◽  
Increasing Temperature

AbstractVegetable drying is an energy consuming procedure despite the fact that it is the most efficient way to preserve agricultural products. This study investigates a new way to dry good quality garlic at lower cost. Thin garlic layer was submitted to free convection airflow at air drying temperature of 40 °C, 50 °C, and 60 °C. Using the slope method, effective diffusivity coefficient was determined at each drying temperature during the first and second falling drying rate periods. Considering the former, it increased with increasing temperature. In relation to latter, it decreased with the temperature increase. However, at low drying temperatures, process keeps on going to very low moisture content; and it develops to an asymptotic value at high temperatures, indicating that shrinking at high temperature prevents evaporation of some residual moisture. Considered separately, these temperatures do not reflect the conditions met in solar drying, since in solar systems, air temperature increases during the day with increasing solar radiation. Therefore, characterization of garlic drying by means of step temperature varying – the first hour of drying at 40 °C; the second hour of drying at 50 °C, and the remaining time of drying at 60 °C – might better correspond with conditions under solar drying and result in better understanding of the process.

scholarly journals Impact of citric acid on the drying characteristics of kiwifruit slices

2020 ◽  
Vol 42 ◽  
pp. e40570
Author(s):  
Ibrahim Doymaz
Keyword(s):  
Regression Analysis ◽  
Citric Acid ◽  
Effective Diffusivity ◽  
Type Equation ◽  
Moisture Diffusion ◽  
Moisture Diffusivity ◽  
Diffusivity Coefficient ◽  
Drying Time ◽  
Drying Temperature ◽  
Drying Behaviour

Kiwifruit slices were dried at four different air drying temperatures of 50, 55, 60 and 70ºC and at 2 m s-1 air velocity by using a cabinet dryer in this study. The drying, rehydration and colour characteristics were significantly influenced by pretreatment and drying temperature. The drying time decreased with the increase in drying temperature. The drying rate curves showed that the entire drying process took place in the falling rate period. Five well-known thin-layer models were evaluated for moisture ratios using nonlinear regression analysis. The results of regression analysis indicated that the Midilli & Kucuk model the best to describe the drying behaviour with the lowest c2 and RMSE values, and highest R2 value. The effective moisture diffusivity of the dried kiwifruit slices was calculated with Fick’s diffusion model, in which their values varied from 4.19×10–10 to 6.99×10-10 m2 s-1 over the mentioned temperature range. The dependence of effective diffusivity coefficient on temperature was expressed by an Arrhenius type equation. The calculated values of the activation energy of moisture diffusion were 10.37 and 19.08 kJ mol-1 for citric acid and control samples, respectively

The thin-layer drying characteristics of sewage sludge by the appropriate foaming pretreatment

2014 ◽  
Vol 69 (9) ◽  
pp. 1859-1866 ◽  
Author(s):  
Hui-Ling Wang ◽  
Zhao-Hui Yang ◽  
Jing Huang ◽  
Li-Ke Wang ◽  
Cheng-Liu Gou ◽  
...  
Keyword(s):  
Sample Thickness ◽  
Coefficient Of Determination ◽  
Drying Rate ◽  
Drying Time ◽  
Drying Characteristics ◽  
Thin Layer Drying ◽  
Dewatered Sludge ◽  
Drying Curves ◽  
Sludge Drying ◽  
The Impact

As dewatered sludge is highly viscous and sticky, the combination of foaming pretreatment and drying process seems to be an alternative method to improve the drying performance of dewatered sludge. In this study, CaO addition followed by mechanical whipping was employed for foaming the dewatered sludge. It was found that the foams were stable and the diameters of bubbles mainly ranged from 0.1 to 0.3 mm. The drying experiments were carried out in a drying oven in the convective mode. The results indicated that foamed sludge at 0.70 g/cm3 had the best drying performance at each level of temperature, which could save 35–45% drying time to reach 20% moisture content compared with the non-foamed sludge. The drying rate of foamed sludge at 0.70 g/cm3 was improved with the increasing of drying temperature. The impact of sample thickness on drying rate was not obvious when the sample thickness increased from 2 to 8 mm. Different mathematical models were used for the simulation of foamed sludge drying curves. The Wang and Singh model represented the drying characteristics better than other models with coefficient of determination values over 0.99.

Thin Layer Drying Process of Some Leafy Vegetables under Open Sun

2007 ◽  
Vol 13 (1) ◽  
pp. 35-40 ◽  
Author(s):  
O. P. Sobukola ◽  
O. U. Dairo ◽  
L. O. Sanni ◽  
A. V. Odunewu ◽  
B. O. Fafiolu
Keyword(s):  
Thin Layer ◽  
Effective Diffusivity ◽  
Thin Layers ◽  
Leafy Vegetables ◽  
Drying Process ◽  
Chi Square ◽  
Thin Layer Drying ◽  
Rate Period ◽  
Drying Models ◽  
Drying Curves

Open sun drying experiments in thin layers of crain-crain (CC), fever (FV) and bitter (BT) leaves grown in Abeokuta, Nigeria were conducted. The drying process took place in the falling rate period and no constant rate period was observed from the drying curves. Eight thin layer mathematical drying models were compared using the multiple determination coefficients (R2), reduced chi-square (χ2) and root mean square error (RMSE) between the observed and predicted moisture ratios. Accordingly, Midilli et al. model satisfactorily described the drying curves of the three leaves with R2 of 0.9980, χ2 of 2.0×10-4 and RMSE of 1.09×10-2 for CC leaves; R2 of 0.9999, χ2 of 2×10-6 and RMSE of 1.11×10-3 for FV leaves; and R2 of 0.9998, χ2 of 1.9×10-5 and RMSE of 3.3×10-3 for BT leaves. The effective diffusivity was found to be 52.91×10-10, 48.72×10-10 and 43.42×10-10 m2/s for CC, BT and FV leaves, respectively.

Sign in / Sign up

Export Citation Format

Share Document