scholarly journals Infrared Characterization and Electrochemical Study of Silanes Grafted into Surface of Copper

2021 ◽  
Author(s):  
Mohamed Masmoudi
Keyword(s):  
Weight Loss ◽  
Potentiodynamic Polarization ◽  
Protective Action ◽  
Protective Layer ◽  
Coupling Agents ◽  
Ambient Conditions ◽  
Silane Coupling Agents ◽  
Band Formation ◽  
Diffuse Reflectance Infrared Spectroscopy ◽  
Diffuse Reflectance Infrared

The formation of a protective layer of tow silane coupling agents: γ -methacryloxypropyltrimethoxysilane (γ-MPS) or γ-aminopropyltriethoxysilane (γ-APS) on copper is studied by diffuse reflectance infrared spectroscopy (DRIFT), electrochemical (Potentiodynamic polarization) and gravimetric chemical (Weight loss) measurements. Dried in ambient conditions, the silane adsorbed on the copper subtract physically, however its protective action is not reliable. Thiolate and siloxane band formation ameliorate the protective action of the silanic layer on the surface of copper especially after curing process. Potentiodynamic polarization and Weight loss experiments show that the performances protective action of cured treatment (cured/Cu-silane) is higher than that of aging process (aged/Cu-silane).

Functionalization of Porous Clay Heterostructures with Silane Coupling Agents

2017 ◽  
Vol 54 (2) ◽  
pp. 341-344
Author(s):  
Anda Ionelia Mihai (Voicu) ◽  
Sorina Alexandra Garea ◽  
Eugeniu Vasile ◽  
Cristina Lavinia Nistor ◽  
Horia Iovu
Keyword(s):  
Pore Volume ◽  
Total Pore Volume ◽  
Coupling Agents ◽  
Silane Coupling Agents ◽  
Porous Clay Heterostructures ◽  
Bet Analysis ◽  
Silane Coupling ◽  
Ftir Spectrometry ◽  
Textural Parameters ◽  
Epoxy Groups

The goal of this paper was to study the modification of porous clay heterostructures (PCHs) with various silane coupling agents. Two commercial coupling agents (3-aminopropyl-triethoxysilane (APTES) and 3-glycidoxypropyl-trimethoxysilane (GPTMS)) with different functional groups (amine and epoxy groups) were used as modifying agents for the PCHs functionalization. The functionalization of PCH with APTES and GPTMS was evaluated by Fourier transform infrared (FTIR) spectrometry, thermogravimetric analysis (TGA), X-Ray Diffractions (XRD) and BET Analysis. FTIR spectra of modified PCHs confirmed the presence of characteristic peaks of silane coupling agents. TGA results highlighted an increase of weight loss for the modified PCHs that was assigned to the degradation of silane coupling agents (APTES and GPTMS) attached to the PCHs. The XRD results showed that the structure of modified PCHs was influenced by the type of the silane coupling agent. The functionalization of PCHs with silane coupling agents was also confirmed by BET analysis. Textural parameters (specific surface area (SBET), total pore volume (Vt )) suggested that the modified PCHs exhibit lower values of SBET and a significant decrease of total pore volume than unmodified PCHs.

scholarly journals Chemical, electrochemical, thermodynamic and adsorption study of EN8 dual-phase steel with ferrite-martensite structure in 0.5 M H2SO4 using pectin as inhibitor

2021 ◽  
Author(s):  
P. R. Prabhu ◽  
Pavan Hiremath ◽  
Deepa Prabhu ◽  
M. C. Gowrishankar ◽  
B. M. Gurumurthy
Keyword(s):  
Weight Loss ◽  
Adsorption Isotherm ◽  
Surface Analysis ◽  
Potentiodynamic Polarization ◽  
Dual Phase Steel ◽  
Inhibition Efficiency ◽  
Dual Phase ◽  
X Ray ◽  
Enthalpy And Entropy ◽  
Martensite Structure

AbstractThis paper presents the corrosion and inhibition behavior of heat-treated EN8 dual-phase steel with ferrite-martensite structure with pectin in 0.5 M sulphuric acid. The corrosion studies were performed using the weight loss method, electrochemical techniques such as potentiodynamic polarization measurements, and impedance spectroscopy. The study was done at different concentrations of pectin in the temperature range of 40 to 70 °C and immersion time of 1, 3, 5, and 7 h. The results showed that the inhibition performance of pectin has enhanced with an increase in pectin concentration and decreased with the temperature and time of exposure. From the weight loss study, highest inhibition efficiency of 76.43% was achieved at 5.0 g/L at 1 h of exposure at 40 °C. The maximum inhibition efficiency of 62% was obtained with 5.0 g/L of pectin at 40 °C by potentiodynamic polarization method. The energy, enthalpy, and entropy of activation and also thermodynamic parameters like free energy, enthalpy, and entropy of adsorption were assessed and discussed. Appropriate adsorption isotherm was fit to the obtained experimental outcomes and achieved Langmuir adsorption isotherm to be the best fit and obeyed physical adsorption. Surface analysis: scanning electron microscopy, X-ray diffraction techniques, atomic force microscopy, and energy dispersive X-ray were done with and without the addition of pectin. The metal surface appears to be uniform and smooth in the presence of pectin and adsorption was confirmed by surface analysis.

Selection and Optimization of Silane Coupling Agents to Develop Durable Functional Cotton Fabrics Using TiO2 Nanoparticles

2021 ◽  
Vol 22 (1) ◽  
pp. 109-122
Author(s):  
S. Riaz ◽  
M. Ashraf ◽  
T. Hussain ◽  
M. T. Hussain ◽  
A. Younus ◽  
...  
Keyword(s):  
Tio2 Nanoparticles ◽  
Cotton Fabrics ◽  
Coupling Agents ◽  
Silane Coupling Agents ◽  
Silane Coupling

scholarly journals Novel pyrimidine-bichalcophene derivatives as corrosion inhibitors for copper in 1 M nitric acid solution

RSC Advances ◽  
2021 ◽  
Vol 11 (41) ◽  
pp. 25314-25333
Author(s):  
Mai A. Khaled ◽  
Mohamed A. Ismail ◽  
Ahmed. A. El-Hossiany ◽  
Abd El-Aziz S. Fouda
Keyword(s):  
Weight Loss ◽  
Electrochemical Impedance Spectroscopy ◽  
Nitric Acid ◽  
Impedance Spectroscopy ◽  
Acid Solution ◽  
Nitric Acid Solution ◽  
Potentiodynamic Polarization ◽  
Corrosion Inhibitors ◽  
Electrochemical Impedance ◽  
Pyrimidine Derivatives

This study targets the investigation of three pyrimidine derivatives (MA-1230, MA-1231, MA-1232) for the prevention of corrosion on copper in 1 M HNO3via weight loss (WL), potentiodynamic polarization (PDP), and electrochemical impedance spectroscopy (EIS) techniques.

Effect of Silane Coupling Agents on Flowability and Compressibility of the Compound for Bonded NdFeB Magnet

2021 ◽  
Author(s):  
Xiaowei Zhang ◽  
Zilong Wang ◽  
Tianhao Li ◽  
Shengjie Zhu ◽  
Dunbo Yu ◽  
...  
Keyword(s):  
Coupling Agents ◽  
Silane Coupling Agents ◽  
Ndfeb Magnet ◽  
Silane Coupling

Figures of Merit for a Diffuse Reflectance Accessory Using an On-Axis Ellipsoidal Collecting Mirror

1988 ◽  
Vol 42 (3) ◽  
pp. 428-433 ◽  
Author(s):  
E. H. Korte
Keyword(s):  
Infrared Spectroscopy ◽  
Noise Level ◽  
Diffuse Reflectance ◽  
Field Of View ◽  
Figures Of Merit ◽  
Size Dependent ◽  
Diffuse Reflectance Infrared Spectroscopy ◽  
Diffuse Reflectance Infrared

The attainable efficiency of an accessory for diffuse reflectance infrared spectroscopy where both the irradiation and detection optics are located on the same side of the sample is analyzed, the size-dependent noise level of the detector being taken into account. The resulting figures of merit are found to reach up to more than 0.3, when standard detectors of 60° field-of-view are considered.

Sign in / Sign up

Export Citation Format

Share Document