scholarly journals Co-Composting of Various Residual Organic Waste and Olive Mill Wastewater for Organic Soil Amendments

2021 ◽  
Author(s):  
Wafa Hassen ◽  
Bilel Hassen ◽  
Rim Werhani ◽  
Yassine Hidri ◽  
Abdennaceur Hassen
Keyword(s):  
Sewage Sludge ◽  
Waste Treatment ◽  
Soil Amendments ◽  
Treatment Method ◽  
Olive Mill Wastewater ◽  
Point Of View ◽  
Municipal Solid Wastes ◽  
Environmental Preservation ◽  
The One ◽  
Olive Mill

The valorization of different organic residues like municipal solid wastes, sewage sludge and olive mill wastewater is becoming more and more worrying in the different modern communities and is becoming relevant and crucial in terms of environmental preservation. The choice of the treatment technique should not be only from the point of view of economic profitability but, above all, must consider the efficiency of the treatment method. Thus, an attempt to remove polyphenols from olive mill wastewater would have a double interest: on the one hand, to solve a major environmental problem and to recover and valorize the olive mill wastewater for advanced applications in food processing and soil amendments. It is also interesting to think of associating two harmful wastes by co-composting such as sewage sludge-vegetable gardens, sewage sludge-municipal solid waste, and green wastes-olive mill wastewater…, to get a mixed compost of good physical–chemical and biological qualities useful for agricultural soil fertilization. Finally, in order to be more practical, we will describe specifically in this chapter a new variant of composting and co-composting technology intended for waste treatment that is very simple, inexpensive and easy to implement.

scholarly journals Technoeconomic Analysis of the Recovery of Phenols from Olive Mill Wastewater through Membrane Filtration and Resin Adsorption/Desorption

2021 ◽  
Vol 13 (4) ◽  
pp. 2376
Author(s):  
Dimitris P. Zagklis ◽  
Costas S. Papageorgiou ◽  
Christakis A. Paraskeva
Keyword(s):  
Capital Investment ◽  
Membrane Filtration ◽  
Hot Spot ◽  
Treatment Method ◽  
Olive Mill Wastewater ◽  
Operational Cost ◽  
Equipment Cost ◽  
Fixed Capital Investment ◽  
Adsorption Desorption ◽  
Olive Mill

Olive mill wastewater is an important agro-industrial waste with no established treatment method. The authors have developed a phenol separation method that could potentially cover the treatment cost of the waste. The purpose of this study was to identify any economic hotspots in the process, the operational cost and examine the margin of profit for such a process. The equipment cost was scaled for different treatment capacities and then used to estimate the fixed capital investment and the yearly operational cost. The highest purchased equipment cost was identified for the membrane filtration system, while the cost for resin replacement was identified as the highest operational cost. The lifespan of the resin used in the adsorption step was identified as an economic hot spot for the process, with the phenols separation cost ranging from 0.84 to 13.6 €/g of phenols for a resin lifespan of 5–100 adsorption/desorption cycles. The lifespan of the resin proved to be the single most important aspect that determines the phenols separation cost. The price range that was calculated for the product of the process is very promising because of the typical value of antioxidants and the low concentration of phenols that are needed for food supplements and cosmetics.

Improving biogas production from anaerobic co-digestion of sewage sludge with a thermal dried mixture of food waste, cheese whey and olive mill wastewater

2018 ◽  
Vol 71 ◽  
pp. 644-651 ◽  
Author(s):  
A.E. Maragkaki ◽  
I. Vasileiadis ◽  
M. Fountoulakis ◽  
A. Kyriakou ◽  
K. Lasaridi ◽  
...  
Keyword(s):  
Sewage Sludge ◽  
Food Waste ◽  
Cheese Whey ◽  
Biogas Production ◽  
Olive Mill Wastewater ◽  
Olive Mill

scholarly journals USE OF SLUDGE FROM SANITARY SEWAGE TREATMENT PLANTS (S.T.P) AND THEIR USE AS RAW MATERIAL IN THE MANUFACTURE OF BRICKS

2019 ◽  
Vol 16 (33) ◽  
pp. 823-840
Author(s):  
M. K. TARABAI ◽  
S. G. de AZEVEDO
Keyword(s):  
Compressive Strength ◽  
Water Absorption ◽  
Sewage Treatment ◽  
Point Of View ◽  
Test Method ◽  
Raw Material ◽  
Environmental Preservation ◽  
Ceramic Block ◽  
Environmental Requirements ◽  
The One

This paper discusses a possible solution regarding the final disposal of sludge from Sanitary Sewage Treatment Stations (ET), aiming at environmental preservation. The solid waste generated after the wastewater treatment processes is highly contaminating and detrimental to the area in which it is deposited. Given this, the use of sludge with the application of reuse techniques becomes pertinent, both from the economic point of view and from the ecological point of view. By replacing the use of aggregates from mineral deposits, the main clay raw material in the manufacture of ceramic products (Vieira, 2000), by the treated sludge of WWTP we will save on the sources of granular materials. Aiming its reintegration to the production cycle through the introduction of sludge as raw material incorporated in the ceramic mass in the manufacture of hollow bricks, the viability of use was verified through performance analysis, compared to the control brick made of pottery, without the addition of sludge. Specimens were prepared with three types of samples: 90% clay and 10% sludge; 80% clay and 20% sludge; 70% clay and 30% sludge. Mass loss, water absorption index and compressive strength tests were performed. As for the tests, the specimens with 10% and 20% of sludge were the ones that had better adaptation to the technical requirements, but because it is a larger volume of the residue for the application of reuse techniques, the brick with 20% sludge dosage. is the most suitable. NBR7.171, November 1992: Ceramic Block for masonry; Specification NBR 6.461, June 1983: Masonry Ceramic Block - Compressive Strength Check: Test Method; NBR 8.947, November 1992: Ceramic Tile- Determination of Mass and Water Absorption: Test Method. As for the tests, the specimen with 20% of sludge was the one that had the best adaptation to technical and environmental requirements. The present article approaches a possible solution regarding the destination of the sludge coming from Sanitary Sewage Treatment Stations, aiming at environmental preservation. Aiming at its reintegration into the productive cycle through applications of reuse techniques, the sludge became raw material when the ceramic mass was incorporated into the brick fabrication. Three types of samples were elaborated: 90% of clay and 10% of mud; 80% clay and 20% sludge; 70% clay and 30% sludge. As for the tests, the test specimen with 20% of sludge was the one that had more adequacy to the technical and environmental requirements.

Partitioning of Cr, Cu, Pb and Zn in sewage sludge incineration by rotary kiln and fluidized bed furnaces

2000 ◽  
Vol 41 (8) ◽  
pp. 61-68 ◽  
Author(s):  
G. Mininni ◽  
C. M. Braguglia ◽  
D. Marani
Keyword(s):  
Fly Ash ◽  
Sewage Sludge ◽  
Rotary Kiln ◽  
Bottom Ash ◽  
Point Of View ◽  
Fluidised Bed ◽  
Chlorinated Organic Compounds ◽  
Sludge Incineration ◽  
Significant Enrichment ◽  
The One

The behaviour of four metals (Cr, Cu, Pb, Zn) during sewage sludge incineration was studied in eight pilot plant tests performed with a rotary kiln (RK) and a fluidised bed (FB) furnace. To simulate sludge co-incineration with hazardous wastes, in three FB tests feed sludge was mixed with chlorinated organic compounds. Chromium and copper showed similar concentrations both in bottom or cyclone ash and in fly ash, even at high chlorine input and high combustion temperature. In contrast, zinc and lead concentrations in fly ash produced in RK tests are one or two orders of magnitude higher than those in bottom ash. However, not even these two metals showed significant enrichment in FB tests carried out at high chlorine input. The predictive capability of a thermodynamic model was checked by comparing predicted metal volatilisation in the combustion chamber with experimental metal enrichment in the fly ash. Large discrepancies were observed in FB tests carried out at high chlorine content, where Pb, Zn, and Cu are predicted to volatilise in great extent, andin RK tests where zinc volatilisation is not predicted. Likely explanations of these discrepancies are the very short solid residence times in the FB furnace (non equilibrium conditions) and the incomplete mixing conditions in the RK furnace (pyrolysis pockets). From the environmental impact point of view, the pilot tests suggest that sludge incineration with fluidised bed furnace is safer than the one using rotary kiln furnace.

Strategy for olive mill wastewater treatment and reuse with a sewage plant in an arid region

2007 ◽  
Vol 55 (10) ◽  
pp. 71-78 ◽  
Author(s):  
R. Boukchina ◽  
E. Choi ◽  
S. Kim ◽  
Y.B. Yu ◽  
Y.J. Cheung
Keyword(s):  
Sewage Sludge ◽  
Arid Region ◽  
Energy Recovery ◽  
Olive Mill Wastewater ◽  
Aeration Tank ◽  
Ch4 Production ◽  
Sewage Plant ◽  
Treated Effluent ◽  
Similar Temperature ◽  
Olive Mill

This study was conducted to evaluate the treatability of OMW (olive mill wastewater) with sewage and sewage sludge, which could supplement nutrients and microbes required for OMW treatment and reduce its possible toxicity. The amount of OMW added to an aeration tank was based on the loading difference between the designed and actual COD loads, while the amount added to anaerobic digestion for energy recovery was determined by CH4 production. The COD removal efficiencies were 70–85% for both systems. Compost of OMW with dried sewage sludge also showed a similar temperature profile without OMW addition. This strongly suggested that OMW can be treated at a sewage plant without pretreatment and the treated effluent can be reused in irrigation for an arid region.

Understanding functional illiteracy from a policy, adult education, and cognition point of view: Towards a joint referent framework

2019 ◽  
Vol 30 (2) ◽  
pp. 109-122
Author(s):  
Aleksandar Bulajić ◽  
Miomir Despotović ◽  
Thomas Lachmann
Keyword(s):  
Adult Education ◽  
Operational Definition ◽  
Literacy Skills ◽  
Point Of View ◽  
Industrialized Countries ◽  
Functional Illiteracy ◽  
Scale Levels ◽  
Components Of Reading ◽  
The One ◽  
Definition Of

Abstract. The article discusses the emergence of a functional literacy construct and the rediscovery of illiteracy in industrialized countries during the second half of the 20th century. It offers a short explanation of how the construct evolved over time. In addition, it explores how functional (il)literacy is conceived differently by research discourses of cognitive and neural studies, on the one hand, and by prescriptive and normative international policy documents and adult education, on the other hand. Furthermore, it analyses how literacy skills surveys such as the Level One Study (leo.) or the PIAAC may help to bridge the gap between cognitive and more practical and educational approaches to literacy, the goal being to place the functional illiteracy (FI) construct within its existing scale levels. It also sheds more light on the way in which FI can be perceived in terms of different cognitive processes and underlying components of reading. By building on the previous work of other authors and previous definitions, the article brings together different views of FI and offers a perspective for a needed operational definition of the concept, which would be an appropriate reference point for future educational, political, and scientific utilization.

Recommendations of The Ombudsman’s Dilemma: Between Law Enforcement Officials and Protection of Credibility

2018 ◽  
Vol 2 ◽  
pp. 1-12
Author(s):  
Dyah Adriantini Sintha Dewi
Keyword(s):  
Law Enforcement ◽  
Public Service ◽  
Public Services ◽  
Point Of View ◽  
Law Enforcement Officials ◽  
Muslim Majority ◽  
The Republic ◽  
The Government ◽  
The One ◽  
Oversight Body

The Ombudsman as an external oversight body for official performance, in Fikih Siyasah (constitutionality in Islam) is included in the supervision stipulated in legislation (al-musahabah al-qomariyah). Supervision is done so that public service delivery to the community is in accordance with the rights of the community. This is done because in carrying out its duties, officials are very likely to conduct mal administration, which is bad public services that cause harm to the community. The Ombudsman is an institution authorized to resolve the mal administration issue, in which one of its products is by issuing a recommendation. Although Law No. 37 of 2018 on the Ombudsman of the Republic of Indonesia states that the recommendation is mandatory, theombudsman's recommendations have not been implemented. This is due to differences in point of view, ie on the one hand in the context of law enforcement, but on the other hand the implementation of the recommendation is considered as a means of opening the disgrace of officials. Recommendations are the last alternative of Ombudsman's efforts to resolve the mal administration case, given that a win-win solution is the goal, then mediation becomes the main effort. This is in accordance with the condition of the Muslim majority of Indonesian nation and prioritizes deliberation in resolving dispute. Therefore, it is necessary to educate the community and officials related to the implementation of the Ombudsman's recommendations in order to provide good public services for the community, which is the obligation of the government.

Correlation between electrical and rheological measurements on sewage sludge

2007 ◽  
Vol 2 (1) ◽  
Author(s):  
E. Dieudé-Fauvel ◽  
J.-C. Baudez ◽  
P. Coussot ◽  
H. Van Damme
Keyword(s):  
Sewage Sludge ◽  
Rheological Parameters ◽  
Clear Correlation ◽  
Electrical Measurements ◽  
Rheological Measurements ◽  
Sludge Characterization ◽  
Relaxation Experiments ◽  
Rheological Experiments ◽  
The One ◽  
Microstructure Of The Material

In order to improve sewage sludge characterization for both dewatering and agricultural spreading, we have studied their electrical and rheological properties. On the one hand, electrical measurements give a picture of the microstructure of the material (charges, particles mobility), whereas on the other hand, rheological experiments describe its macrostructure (consistency). The interactions of the matter are the link between them. Our results showed that sludge becomes more conductive when its dry content (for a defined composition) or the temperature increases, and also during aging. In parallel its apparent viscosity increases with the dry content but decreases with the temperature or during aging. In each case a clear correlation was found between electrical and rheological parameters. This relationship clearly depends on sludge composition, and also on parameters such as the temperature, the observation frequency, the velocity range in the case of relaxation experiments. Finally, those types of experiments can be correlated to improve the comprehension of sludge structure and consistency characterization.

Sign in / Sign up

Export Citation Format

Share Document