scholarly journals Numerical and Experimental Analysis of Thermochemical Treatment for the Liquefaction of Lemon Bagasse in a Jacketed Vessel

2020 ◽  
Author(s):  
Brenno S. Leite ◽  
Daniel J.O. Ferreira ◽  
Sibele A.F. Leite ◽  
Vanessa F.C. Lins
Keyword(s):  
Experimental Data ◽  
Experimental Analysis ◽  
Thermochemical Treatment ◽  
Thermal Profile ◽  
Transient Simulations ◽  
Catalyst Temperature ◽  
Computational Fluid Dynamics Cfd ◽  
Liquefaction Process ◽  
D Model ◽  
Time Of Reaction

In this work, it was investigated the time evolution of thermal profile inside a liquefaction vessel and how the temperature and time of reaction influenced liquefaction yield. Liquefaction was performed in two different ways: (1) Experimental Analysis; (2) Numerical 3-D model, using Computational Fluid Dynamics (CFD). Liquefaction was performed using lemon bagasse samples, glycerol and sulphuric acid, as catalyst. Temperature and liquefaction Yield (LY) were measured for different time of reaction (30, 60 and 90 minutes). From experimental data, LY were higher than 70 wt% for 90 minutes reaction. The increase in the temperature inside the reactor occurred due to the conduction and natural convection phenomena. Although the jacketed vessel was fed with steam at 125°C, working conditions allowed the heating of the mixture to less than 100°C. CFD thermal profile was in accordance with experimental data. They showed it was necessary 60 minutes to achieve a steady state of heating in the mixture inside this liquefaction vessel. From CFD transient simulations, it was observed some oscillations and detachment from experimental data, which may be due to changes in fluids properties along the process. Despite this consideration CFD could satisfactory analyse heat transfer in this liquefaction process.

scholarly journals Numerical and Experimental Analysis of the Noise Generated in a Ducted Cavity Working in Various Conditions

Energies ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 7545
Author(s):  
Sebastian Rulik ◽  
Włodzimierz Wróblewski ◽  
Krzysztof Rusin
Keyword(s):  
Experimental Data ◽  
Experimental Analysis ◽  
Sound Pressure ◽  
Pressure Fluctuations ◽  
Sound Waves ◽  
Flow Conditions ◽  
Air Velocity ◽  
Labview Software ◽  
Computational Fluid Dynamics Cfd ◽  
Flow Over A Cavity

Flow over a cavity or a gap may induce pressure fluctuations that are emitted as sound waves and perceived by a human as noise. This phenomenon may occur in different kinds of industrial machines or in everyday life devices, e.g., cars. For this reason, it is important to predict the flow conditions that intensify or attenuate the noise. This research paper presents the numerical and experimental analysis of the pressure fluctuations in a deep, ducted cavity. The experimental test stand made it possible to investigate the flow over a cavity with air velocity in the range of 30–80 m/s. The pressure fluctuations were measured using miniature microphones located in the duct and the cavity wall and processed with LabView software. The phenomena were also analysed using the computational fluid dynamics (CFD) technique. The several modelling approaches were tested and validated against the experimental data. The highest sound pressure levels were obtained for 40 and 70 m/s. The sound frequency increased with the flow velocity.

Effects of Over Fire Air on the Combustion and NOx Emission Characteristics of a 600 MW Opposed Swirling Fired Boiler

2012 ◽  
Vol 512-515 ◽  
pp. 2135-2142 ◽  
Author(s):  
Yu Peng Wu ◽  
Zhi Yong Wen ◽  
Yue Liang Shen ◽  
Qing Yan Fang ◽  
Cheng Zhang ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Experimental Data ◽  
Empirical Method ◽  
Nox Emission ◽  
Emission Characteristics ◽  
Cfd Model ◽  
Nitrogen Release ◽  
Computational Fluid Dynamics Cfd ◽  
Low Nox Emission

A computational fluid dynamics (CFD) model of a 600 MW opposed swirling coal-fired utility boiler has been established. The chemical percolation devolatilization (CPD) model, instead of an empirical method, has been adapted to predict the nitrogen release during the devolatilization. The current CFD model has been validated by comparing the simulated results with the experimental data obtained from the boiler for case study. The validated CFD model is then applied to study the effects of ratio of over fire air (OFA) on the combustion and nitrogen oxides (NOx) emission characteristics. It is found that, with increasing the ratio of OFA, the carbon content in fly ash increases linearly, and the NOx emission reduces largely. The OFA ratio of 30% is optimal for both high burnout of pulverized coal and low NOx emission. The present study provides helpful information for understanding and optimizing the combustion of the studied boiler

The Effect of Turbulence and Real Gas Models on the Two Phase Spontaneously Condensing Flows in Nozzle

2013 ◽  
Author(s):  
Yogini Patel ◽  
Giteshkumar Patel ◽  
Teemu Turunen-Saaresti
Keyword(s):  
Fluid Dynamics ◽  
Experimental Data ◽  
Nucleation Theory ◽  
Classical Nucleation Theory ◽  
Navier Stokes ◽  
Two Phase ◽  
Real Gas ◽  
Spontaneous Condensation ◽  
Condensing Flows ◽  
Computational Fluid Dynamics Cfd

The aim of the paper is to analyse the effect of turbulence and real gas models on the process of spontaneous condensation in converging diverging (CD) nozzle by using commercial Computational Fluid Dynamics (CFD) code. The calculations were based on the 2-D compressible Navier-Stokes (NS) equations coupled with two-equation turbulence model, and the non-equilibrium spontaneous condensing steam flow was solved on the basis of the classical nucleation theory. The results were validated to the available experimental data.

scholarly journals Experimental Analysis of Power Flows in the Regenerative Vibration Reduction System with a Magnetorheological Damper

Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 848
Author(s):  
Bogdan Sapiński ◽  
Paweł Orkisz ◽  
Łukasz Jastrzębski
Keyword(s):  
Experimental Data ◽  
Experimental Analysis ◽  
Vibration Reduction ◽  
Mr Damper ◽  
Magnetorheological Damper ◽  
Test Rig ◽  
Instantaneous Power ◽  
Reduction System ◽  
Inertial Energy ◽  
Regenerative Vibration

The aim of the work is to investigate power flows in the vibration reduction system equipped with a magnetorheological (MR) damper and energy regeneration. For this purpose, experiments were conducted in the test rig compound of the shaker and the vibration reduction system (electromagnetic harvester, MR damper, spring) which are attached to the sprung mass. The experimental data acquired under sine excitations enabled us to analyze instantaneous power fluxes, as well as a rate of inertial energy changes in the system.

An experimental analysis of the cooling constant computation

2021 ◽  
Vol 57 (2) ◽  
pp. 025001
Author(s):  
J E M Perea Martins
Keyword(s):  
Experimental Data ◽  
Water Temperature ◽  
Experimental Analysis ◽  
Electronic System ◽  
Water Cooling ◽  
Cooling Process ◽  
Data Set ◽  
Theoretical Methods ◽  
Electronic Instrumentation

Abstract This work presents the design of an inexpensive electronic system to measure water temperature and generate an experimental data set used to verify the fitting between experimental and theoretical curves of a water-cooling process. The cooling constant is computed with three different theoretical methods to check their efficiency and this approach allows the association of theoretical and experimental aspects of physics, mathematics and electronic instrumentation, which can motivate interesting discussions in the classroom.

scholarly journals Modelling of working processes of non-contact oil free vacuum pumps by computational fluid dynamics (CFD) methods

2021 ◽  
Vol 2059 (1) ◽  
pp. 012003
Author(s):  
A Burmistrov ◽  
A Raykov ◽  
S Salikeev ◽  
E Kapustin
Keyword(s):  
Fluid Dynamics ◽  
Experimental Data ◽  
Computational Fluid Dynamics ◽  
Mathematical Models ◽  
Cfd Models ◽  
Ansys Cfx ◽  
Sst Turbulence Model ◽  
Computational Fluid Dynamics Cfd ◽  
Dynamic Meshing ◽  
Comparison With Experimental Data

Abstract Numerical mathematical models of non-contact oil free scroll, Roots and screw vacuum pumps are developed. Modelling was carried out with the help of software CFD ANSYS-CFX and program TwinMesh for dynamic meshing. Pumping characteristics of non-contact pumps in viscous flow with the help of SST-turbulence model were calculated for varying rotors profiles, clearances, and rotating speeds. Comparison with experimental data verified adequacy of developed CFD models.

scholarly journals Impact of Turbulence Models on the Air Flow in a Confined Rectangular Space

2020 ◽  
pp. 46-53
Author(s):  
Jakub Mularski ◽  
Amit Arora ◽  
Muhammad Azam Saeed ◽  
Łukasz Niedźwiecki ◽  
Samrand Saeidi
Keyword(s):  
Experimental Data ◽  
Air Flow ◽  
Turbulence Models ◽  
The Other ◽  
Experimental Measurements ◽  
Wall Region ◽  
Sst Model ◽  
Computational Fluid Dynamics Cfd ◽  
The Impact ◽  
The Given

The paper regards the impact of four different turbulence models on the air flow pattern in a confined rectangular space. The following approaches are analyzed. The Baseline (BSL) Reynolds model, the Speziale-Sarkar-Gatzki (SSG) Reynolds model, the Menter's shear-stress transport (SST) model and the basic k-ε model. Computational fluid dynamics (CFD) results are compared with the experimental measurements in four different planes. The Reynolds number for the given conditions is equal to 5000. The k-ε model yielded the most accurate results with regard to the experimental data but its reliability decreased near the wall region. With respect to the other models, it was also found that the k-ε approach generated the least circulating flow.

Computational Fluid Dynamics Techniques for Flows in Lapple Cyclone Separator

2005 ◽  
Vol 498-499 ◽  
pp. 179-185
Author(s):  
A.F. Lacerda ◽  
Luiz Gustavo Martins Vieira ◽  
A.M. Nascimento ◽  
S.D. Nascimento ◽  
João Jorge Ribeiro Damasceno ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Experimental Data ◽  
Computational Fluid Dynamics ◽  
Turbulent Flow ◽  
Reynolds Stress ◽  
Cyclone Separator ◽  
Two Dimensional ◽  
Stress Components ◽  
Computational Fluid Dynamics Cfd

A two-dimensional fluidynamics model for turbulent flow of gas in cyclones is used to evaluate the importance of the anisotropic of the Reynolds stress components. This study presents consisted in to simulate through computational fluid dynamics (CFD) package the operation of the Lapple cyclone. Yields of velocity obtained starting from a model anisotropic of the Reynolds stress are compared with experimental data of the literature, as form of validating the results obtained through the use of the Computational fluid dynamics (Fluent). The experimental data of the axial and swirl velocities validate numeric results obtained by the model.

Two-Phase Flow Behavior in Channels With Sudden Area Change Using Experimental and Computational Approach

2017 ◽  
Author(s):  
Ashish Kotwal ◽  
Che-Hao Yang ◽  
Clement Tang
Keyword(s):  
Experimental Data ◽  
Pressure Drop ◽  
Experimental Analysis ◽  
Single Phase ◽  
Computational Analysis ◽  
Phase Flow ◽  
Single Phase Flow ◽  
Two Phase ◽  
Flow Rates ◽  
Area Change

The current study shows computational and experimental analysis of multiphase flows (gas-liquid two-phase flow) in channels with sudden area change. Four test sections used for sudden contraction and expansion of area in experiments and computational analysis. These are 0.5–0.375, 0.5–0.315, 0.5–0.19, 0.5–0.14, inversely true for expansion channels. Liquid Flow rates ranging from 0.005 kg/s to 0.03 kg/s employed, while gas flow rates ranging from 0.00049 kg/s to 0.029 kg/s implemented. First, single-phase flow consists of only water, and second two-phase Nitrogen-Water mixture flow analyzed experimentally and computationally. For Single-phase flow, two mathematical models used for comparison: the two transport equations k-epsilon turbulence model (K-Epsilon), and the five transport equations Reynolds stress turbulence interaction model (RSM). A Eulerian-Eulerian multiphase approach and the RSM mathematical model developed for two-phase gas-liquid flows based on current experimental data. As area changes, the pressure drop observed, which is directly proportional to the Reynolds number. The computational analysis can show precise prediction and a good agreement with experimental data when area ratio and pressure differences are smaller for laminar and turbulent flows in circular geometries. During two-phase flows, the pressure drop generated shows reasonable dependence on void fraction parameter, regardless of numerical analysis and experimental analysis.

On the Validation of Turbulence Models for Wheel and Wheelhouse Aerodynamics

2021 ◽  
Author(s):  
Kaloki Nabutola ◽  
Sandra Boetcher
Keyword(s):  
Experimental Data ◽  
Turbulence Model ◽  
Turbulence Models ◽  
Vehicle Body ◽  
Flow Structures ◽  
Time Resolved ◽  
Flow Control Devices ◽  
Vehicle Aerodynamics ◽  
Computational Fluid Dynamics Cfd ◽  
Drag And Lift

Abstract Vehicle aerodynamics plays an important role in reducing fuel consumption. The underbody contributes to around 50% of the overall drag of a vehicle. As part of the underbody, the wheels and wheelhouses contribute to approximately 25-30% of the overall drag of a vehicle. As a result, wheel aerodynamics studies have been gaining popularity. However, a consensus of an appropriate turbulence model has not been reached, partially due to the lack of experiments appropriate for turbulence model validation studies for this type of flow. Seven turbulence models were used to simulate the flow within the wheelhouse of a simplified vehicle body, and results were shown to be incongruous with commonly used experimental data. The performance of each model was evaluated by comparing the aerodynamic coefficients obtained using computational fluid dynamics (CFD) to data collected from the Fabijanic wind tunnel experiments. The various turbulence models generally agreed with each other when determining average values, such a mean drag and lift coefficients, even if the particular values did not fall within the uncertainty of the experiment; however, they exhibited differences in the level of resolution in the flow structures within the wheelhouse. These flow structures are not able to be validated with currently available experimental data. Properly resolving flow structures is important when implementing flow control devices to reduce drag. Results from this study emphasize the need for spatially and time-resolved experiments, especially for validating LES and DES for flow within a wheelhouse.

Sign in / Sign up

Export Citation Format

Share Document