scholarly journals A New Boundary Element Formulation for Modeling and Optimization of Three-Temperature Nonlinear Generalized Magneto-Thermoelastic Problems of FGA Composite Microstructures

2020 ◽  
Author(s):  
Mohamed Abdelsabour Fahmy
Keyword(s):  
Boundary Element ◽  
Element Formulation ◽  
Modeling And Optimization ◽  
Thermoelastic Problems

scholarly journals A Computerized Boundary Element Algorithm for Modeling and Optimization of Complex Magneto-Thermoelastic Problems in MFGA Structures

2019 ◽  
pp. 1-13 ◽  
Author(s):  
Mohamed Abdelsabour Fahmy ◽  
Saleh M. Al-Harbi ◽  
Badr Hamedy Al-Harbi ◽  
Alanod M. Sibih
Keyword(s):  
Integral Equation ◽  
Boundary Element ◽  
Boundary Integral ◽  
Functionally Graded ◽  
Original Research ◽  
Governing Equations ◽  
Modeling And Optimization ◽  
Original Research Paper ◽  
Thermoelastic Problems ◽  
Element Algorithm

Aims: The aim of this article is to propose a boundary integral equation algorithm for modeling and optimization of magneto-thermoelastic problems in multilayered functionally graded anisotropic (MFGA) structures. Study Design:  Original research paper. Place and Duration of Study: Jamoum laboratory, January 2018. Methodology: a new dual reciprocity boundary element algorithm was implemented for solving the governing equations of magneto-thermoelastic problems in MFGA structures. Results: A numerical results demonstrate validity, accuracy, and efficiency of the presented technique. Conclusion: Our results thus confirm the validity, accuracy, and efficiency of the proposed technique. It is noted that the obtained dual reciprocity boundary element method (DRBEM) results are more accurate than the FEM results, the DRBEM is more efficient and easy to use than FEM because it only needs the boundary of the domain needs to be discretized.

Reduced-Order Modeling of Unsteady Flows About Complex Configurations Using the Boundary Element Method

2002 ◽  
Vol 124 (4) ◽  
pp. 988-993 ◽  
Author(s):  
V. Esfahanian ◽  
M. Behbahani-nejad
Keyword(s):  
Boundary Element Method ◽  
Boundary Element ◽  
Three Dimensional ◽  
Unsteady Flows ◽  
Reduced Order Modeling ◽  
Element Formulation ◽  
Reduced Order Models ◽  
Reduced Order ◽  
Naca 0012 ◽  
Element Method

An approach to developing a general technique for constructing reduced-order models of unsteady flows about three-dimensional complex geometries is presented. The boundary element method along with the potential flow is used to analyze unsteady flows over two-dimensional airfoils, three-dimensional wings, and wing-body configurations. Eigenanalysis of unsteady flows over a NACA 0012 airfoil, a three-dimensional wing with the NACA 0012 section and a wing-body configuration is performed in time domain based on the unsteady boundary element formulation. Reduced-order models are constructed with and without the static correction. The numerical results demonstrate the accuracy and efficiency of the present method in reduced-order modeling of unsteady flows over complex configurations.

A boundary element formulation for a class of non-local damage models

1999 ◽  
Vol 36 (24) ◽  
pp. 3617-3638 ◽  
Author(s):  
R. García ◽  
J. Flórez-López ◽  
M. Cerrolaza
Keyword(s):  
Boundary Element ◽  
Element Formulation ◽  
Local Damage ◽  
Damage Models ◽  
Non Local

Theory of a Time Domain Boundary Element Development for the Dynamic Analysis of Coupled Multiphase Porous Media

2017 ◽  
Vol 08 (03n04) ◽  
pp. 1750007
Author(s):  
Pooneh Maghoul ◽  
Behrouz Gatmiri
Keyword(s):  
Boundary Element ◽  
Time Domain ◽  
Unsaturated Soils ◽  
Water Pressure ◽  
Domain Boundary ◽  
Fundamental Solutions ◽  
Element Formulation ◽  
Inertia Effects ◽  
Coupled Equations ◽  
The Time Domain

This paper presents an advanced formulation of the time-domain two-dimensional (2D) boundary element method (BEM) for an elastic, homogeneous unsaturated soil subjected to dynamic loadings. Unlike the usual time-domain BEM, the present formulation applies a convolution quadrature which requires only the Laplace-domain instead of the time-domain fundamental solutions. The coupled equations governing the dynamic behavior of unsaturated soils ignoring contributions of the inertia effects of the fluids (water and air) are derived based on the poromechanics theory within the framework of a suction-based mathematical model. In this formulation, the solid skeleton displacements [Formula: see text], water pressure [Formula: see text] and air pressure [Formula: see text] are presumed to be independent variables. The fundamental solutions in Laplace transformed-domain for such a dynamic [Formula: see text] theory have been obtained previously by authors. Then, the BE formulation in time is derived after regularization by partial integrations and time and spatial discretizations. Thereafter, the BE formulation is implemented in a 2D boundary element code (PORO-BEM) for the numerical solution. To verify the accuracy of this implementation, the displacement response obtained by the boundary element formulation is verified by comparison with the elastodynamics problem.

A Boundary Element Method for Multi-Body Contact Problems and its Application to the Analysis of a Huge Excavator

1995 ◽  
Author(s):  
Chong-De Liu ◽  
Jiyuan Yu ◽  
Xiaoming Wang
Keyword(s):  
Boundary Element Method ◽  
Boundary Element ◽  
Contact Problems ◽  
Fortran Program ◽  
Boundary Integral ◽  
Element Formulation ◽  
Body Contact ◽  
Boundary Integral Formulation ◽  
Discretization Technique ◽  
Multi Body

Abstract The derivation of a boundary integral formulation and discretization technique in terms of boundary elements for the solution of multi-body contact problems has been carried out. A FORTRAN program has been developed based on this boundary element formulation and has been applied to the stress analysis of a huge caterpillar excavator woth 16 m3 bucket capacity.

Study on Temperature Distribution of Pebble-Bed HTR Fuel Element by Using Boundary Element Method

2013 ◽  
Author(s):  
Haitao Wang ◽  
Xin Wang
Keyword(s):  
Fuel Element ◽  
Boundary Element ◽  
Large Scale ◽  
Maximum Temperature ◽  
Element Formulation ◽  
Desktop Computer ◽  
Pebble Bed ◽  
Graphite Matrix ◽  
Fuel Particles ◽  
Fuel Elements

Spherical fuel elements with a diameter of 60mm are basic units of the nuclear fuel for the pebble-bed high temperature gas-cooled reactor (HTR). Each fuel element is treated as a graphite matrix containing around 10,000 randomly distributed fuel particles. The essential safety concept of the pebble-bed HTR is based on the objective that maximum temperature of the fuel particles does not exceed the design value. In this paper, a microstructure-based boundary element model is proposed for the large-scale thermal analysis of a spherical fuel element. This model presents detailed structural information of a large number of coated fuel particles dispersed in a spherical graphite matrix in order that temperature distributions at the level of fuel particles can be evaluated. The model is meshed with boundary elements in conjunction with the fast multipole method (FMM) in order that such large-scale computation is performed only in a personal desktop computer. Taking advantage of the fact that fuel particles are of the same shape, a similar sub-domain approach is used to establish the temperature translation mechanism between various layers of each fuel particle and to simplify the associated boundary element formulation. The numerical results demonstrate large-scale capacity of the proposed method for the multi-level temperature evaluation of the pebble-bed HTR fuel elements.

scholarly journals Boundary Element formulation for Electrical Impedance Tomography

2005 ◽  
Vol 14 ◽  
pp. 63-71 ◽  
Author(s):  
M. Clerc ◽  
J.-M. Badier ◽  
G. Adde ◽  
J. Kybic ◽  
T. Papadopoulo
Keyword(s):  
Boundary Element ◽  
Electrical Impedance Tomography ◽  
Electrical Impedance ◽  
Element Formulation ◽  
Impedance Tomography
Sign in / Sign up

Export Citation Format

Share Document