scholarly journals Early Warning And On-Line Mapping For Flood Events

Author(s):  
D. Mioc ◽  
B. Nickerson ◽  
F. Anton ◽  
E. MacGillivray ◽  
A. Morton ◽  
...  
Keyword(s):  
Author(s):  
D. Mioc ◽  
E. McGillivray ◽  
F. Anton ◽  
M. Mezouaghi ◽  
L. Mofford ◽  
...  

2021 ◽  
Author(s):  
Thierry Hohmann ◽  
Judit Lienert ◽  
Jafet Andersson ◽  
Darcy Molnar ◽  
Peter Molnar ◽  
...  

<p><strong>Introduction</strong></p><p>Flood early warning systems (FEWS) can reduce casualties and economic losses (UNEP, 2012). The EC Horizon 2020 project FANFAR (www.fanfar.eu) aims to co-develop a FEWS in West Africa together with stakeholders, predicting streamflow and return period threshold exceedance (Andersson et al., 2020). A Multi-Criteria Decision Analysis (MCDA) indicated, that stakeholders find information accuracy especially important, among a broad set of fundamental objectives (Lienert et al., 2020). Social media have the potential to support accuracy assessment by detecting flood events (Lorini et al., 2019; de Bruijn et al., 2019) due to their large spatial coverage (Restrepo-Estrada et al., 2018). We investigated the potential of social media to assess FANFAR forecast accuracy.</p><p> </p><p><strong>Research Approach</strong></p><p>FANFAR forecasts are based on HYPE, which is a semi-distributed land-cover and sub-catchment based hydrological model (Arheimer et al., 2020). We lumped the forecasted flood risk (FFR) on a country scale and compared it to flood events detected on Twitter, using an algorithm (FEDA) developed by de Bruijn et al. (2019). FEDA detects flood-related tweet bursts based on regionally and temporally adjusted thresholds (de Bruijn et al., 2019). We compared FEDA detected events with floods from the disaster database EM-DAT (https://www.emdat.be/), to find if tweets indicate flooding. We also compared FEDA to the lumped FFR to identify false positives (FP), false negatives (FN), and true positives (TP), from which we deduced the probability of detection (POD) and false alarm rate (FAR). We further calculated the correlation of single flood-related tweets with the lumped FFR and investigated seasonality, lag, and the influence of rainfall.</p><p> </p><p><strong>Findings</strong></p><p>The detailed findings are described in Hohmann (2021). FEDA (i.e., tweets) and EM-DAT events (i.e., floods) mostly occurred in the same period. However, FEDA detected shorter and more frequent events than EM-DAT. In the Upper Niger, POD<sub>FEDA</sub> and FAR<sub>FEDA</sub> (deduced from FEDA) were of similar order of magnitude as the POD<sub>S</sub> and FAR<sub>S</sub> (deduced from streamflow) but were different in the Lower Niger region. This suggests that tweets can be employed additionally to e.g. streamflow timeseries as a complementary way to evaluate accuracy. Correlation analysis between single flood-related tweets and the lumped FFR showed no relationship. We also did not find a systematic influence of seasonality or a lagged response between tweets and FFR. The correlation coefficients between tweets and rainfall ranged from 0.1-0.9, but were mostly non-significant. This suggests that a performance assessment based on single tweets is not (yet) adequate. Also, since FEDA does not differentiate between pluvial and fluvial floods, it is less suited to assess the accuracy of FANFAR. Our findings suggest the need for inclusion of other factors into the performance assessment of FEWSs, such as regional thresholds to identify TP, FP, and FN. Also, rainfall causing pluvial flooding must be considered. Finally, our approach is limited to Twitter. Further research should assess the potential of e.g. Facebook to be included in FEWS performance assessment. The question whether social media, FEWSs, or EM-DAT are correct remains, and is in our opinion best addressed by employing multiple data sources.</p>


Electronics ◽  
2019 ◽  
Vol 8 (11) ◽  
pp. 1350 ◽  
Author(s):  
Chen ◽  
Wu ◽  
Wu ◽  
Xiong ◽  
Han ◽  
...  

The unmanned aerial vehicle (UAV), which is a typical multi-sensor closed-loop flight control system, has the properties of multivariable, time-varying, strong coupling, and nonlinearity. Therefore, it is very difficult to obtain an accurate mathematical diagnostic model based on the traditional model-based method; this paper proposes a UAV sensor diagnostic method based on data-driven methods, which greatly improves the reliability of the rotor UAV nonlinear flight control system and achieves early warning. In order to realize the rapid on-line fault detection of the rotor UAV flight system and solve the problems of over-fitting, limited generalization, and long training time in the traditional shallow neural network for sensor fault diagnosis, a comprehensive fault diagnosis method based on deep belief network (DBN) is proposed. Using the DBN to replace the shallow neural network, a large amount of off-line historical sample data obtained from the rotor UAV are trained to obtain the optimal DBN network parameters and complete the on-line intelligent diagnosis to achieve the goal of early warning as possible as quickly. In the end, the two common faults of the UAV sensor, namely the stuck fault and the constant deviation fault, are simulated and compared with the back propagation (BP) neural network model represented by the shallow neural network to verify the effectiveness of the proposed method in the paper.


Author(s):  
Yigon Kim ◽  
◽  
Yang Hee Jung ◽  
Yong Chul Bae

Insulation aging diagnosis provides early warning of electrical equipment defects that helps avoid loss from unexpected production line shutdown. Since relations of insulation aging and partial discharge dynamics are nonlinear, it is very difficult to provide early warning in electrical equipment. This paper suggests a new method for diagnosing insulation aging that measures partial discharge on-line from DAS(Data Acquisition System) and acquires 2D patterns from analyzing it using wavelets. Using this data, design of a neurofuzzy model that diagnoses electrical equipment is investigated. Validity of the new method is confirmed by numerical simulation.


2014 ◽  
Vol 945-949 ◽  
pp. 2199-2202
Author(s):  
Zi Wen Dai ◽  
Hai Yang Liao

According to the demand of water quality automatic monitoring in many large or medium reservoirs, we proposed an on-line water quality monitoring system. It is composed of wireless sensor networks and an embedded monitoring platform. We built a novel early-warning model to well adapt to the regular pattern of water quality change in the reservoirs. As a result, an Android application with outstanding control experience is achieved for real-time monitoring, water pollution early warning and water quality comprehensive assessment. Experimental results show that the system can work stably for a long time and provide accurate monitoring information continuously. It can also detect the abnormal signals of water quality in time and alarm. The system efficiently satisfies the requirement of water quality on-line automatic monitoring.


2014 ◽  
Vol 36 (1) ◽  
pp. 3-13 ◽  
Author(s):  
Zbigniew Bednarczyk

Abstract This paper is a presentation of landslide monitoring, early warning and remediation methods recommended for the Polish Carpathians. Instrumentation included standard and automatic on-line measurements with the real-time transfer of data to an Internet web server. The research was funded through EU Innovative Economy Programme and also by the SOPO Landslide Counteraction Project. The landslides investigated were characterized by relatively low rates of the displacements. These ranged from a few millimetres to several centimetres per year. Colluviums of clayey flysch deposits were of a soil-rock type with a very high plasticity and moisture content. The instrumentation consisted of 23 standard inclinometers set to depths of 5-21 m. The starting point of monitoring measurements was in January 2006. These were performed every 1-2 months over the period of 8 years. The measurements taken detected displacements from several millimetres to 40 cm set at a depth of 1-17 m. The modern, on-line monitoring and early warning system was installed in May 2010. The system is the first of its kind in Poland and only one of several such real-time systems in the world. The installation was working with the Local Road Authority in Gorlice. It contained three automatic field stations for investigation of landslide parameters to depths of 12-16 m and weather station. In-place tilt transducers and innovative 3D continuous inclinometer systems with sensors located every 0.5 m were used. It has the possibility of measuring a much greater range of movements compared to standard systems. The conventional and real-time data obtained provided a better recognition of the triggering parameters and the control of geohazard stabilizations. The monitoring methods chosen supplemented by numerical modelling could lead to more reliable forecasting of such landslides and could thus provide better control and landslide remediation possibilities also to stabilization works which prevent landslides.


1968 ◽  
Vol 1 (1) ◽  
pp. 18-19 ◽  
Author(s):  
G. L. Collier ◽  
R. E. Green

Water is a common contaminant of many products. Most natural products such as grain and flour, tobacco, wood and paper contain a high proportion of water in their normal states and can be too wet or too dry. Many synthetic materials such as polymers manufactured from petroleum are hydrophobic in nature, and give the most satisfactory performance during processes such as extrusion, moulding and spinning when they are completely dry. Polypropylene and polyvinyl chloride come into this category. Both these polymers, however, exist in a finely divided state during manufacture and tend to retain significant quantities of water upon the large surfaces they present. This water may then cause trouble during fabrication such as surface imperfections on injection mouldings, filament breakages during spinning and voids in extruded sections. Routine analysis for moisture content is therefore an important control on the manufacturing process, and there are many advantages in a semi-continuous on-line analyser for this purpose. On-line analysis avoids the necessity for product storage pending laboratory analysis for moisture by giving early warning of a change in the drier performance and enables the drier to be run at the lowest possible temperature. Material packed for despatch must have a water content not exceeding 0.03% w/w so that equipment capable of detecting 0.003% water is required. This paper describes a fully automatic analyser for this duty.


Sign in / Sign up

Export Citation Format

Share Document