Composite Right / Left Handed (CRLH) Based Devices for Microwave Applications

The properties of metal/semiconductor interfaces have received considerable attention over the past few years, and the Al/GaAs system is of special interest because of its potential use in high-speed logic integrated optics, and microwave applications. For such materials a detailed knowledge of the geometric and electronic structure of the interface is fundamental to an understanding of the electrical properties of the contact. It is well known that the properties of Schottky contacts are established within a few atomic layers of the deposited metal. Therefore surface contamination can play a significant role. A method for fabricating contamination-free interfaces is absolutely necessary for reproducible properties, and molecularbeam epitaxy (MBE) offers such advantages for in-situ metal deposition under UHV conditions

Download Full-text

Single molecule optical diffraction: A tool for understanding the structure of triple stranded left-hand helical cellulose

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100157103 ◽

1989 ◽

Vol 47 ◽

pp. 1024-1025

Author(s):

George C. Ruben ◽

William Krakow

Keyword(s):

Single Molecule ◽

Helical Structure ◽

Optical Diffraction ◽

Maximum Diameter ◽

Primary Cell Wall ◽

Cellulose Synthesis ◽

Left Hand ◽

Left Handed ◽

Freeze Dried ◽

Diffraction Patterns

Tobacco primary cell wall and normal bacterial Acetobacter xylinum cellulose formation produced a 36.8±3Å triple-stranded left-hand helical microfibril in freeze-dried Pt-C replicas and in negatively stained preparations for TEM. As three submicrofibril strands exit the wall of Axylinum , they twist together to form a left-hand helical microfibril. This process is driven by the left-hand helical structure of the submicrofibril and by cellulose synthesis. That is, as the submicrofibril is elongating at the wall, it is also being left-hand twisted and twisted together with two other submicrofibrils. The submicrofibril appears to have the dimensions of a nine (l-4)-ß-D-glucan parallel chain crystalline unit whose long, 23Å, and short, 19Å, diagonals form major and minor left-handed axial surface ridges every 36Å.The computer generated optical diffraction of this model and its corresponding image have been compared. The submicrofibril model was used to construct a microfibril model. This model and corresponding microfibril images have also been optically diffracted and comparedIn this paper we compare two less complex microfibril models. The first model (Fig. 1a) is constructed with cylindrical submicrofibrils. The second model (Fig. 2a) is also constructed with three submicrofibrils but with a single 23 Å diagonal, projecting from a rounded cross section and left-hand helically twisted, with a 36Å repeat, similar to the original model (45°±10° crossover angle). The submicrofibrils cross the microfibril axis at roughly a 45°±10° angle, the same crossover angle observed in microflbril TEM images. These models were constructed so that the maximum diameter of the submicrofibrils was 23Å and the overall microfibril diameters were similar to Pt-C coated image diameters of ∼50Å and not the actual diameter of 36.5Å. The methods for computing optical diffraction patterns have been published before.

Download Full-text

Left handed GDPs and students

BDJ ◽

10.1038/sj.bdj.4808800 ◽

1995 ◽

Vol 178 (12) ◽

pp. 448-448 ◽

Cited By ~ 1

Author(s):

J M Brown

Keyword(s):

Left Handed

Download Full-text

Composite right/left-handed transmission line with array of thermocouples for generating terahertz radiation

The European Physical Journal Applied Physics ◽

10.1051/epjap/2020200208 ◽

2020 ◽

Vol 92 (2) ◽

pp. 20502

Author(s):

Behrokh Beiranvand ◽

Alexander S. Sobolev ◽

Anton V. Kudryashov

Keyword(s):

Transmission Line ◽

Terahertz Radiation ◽

Transmission Lines ◽

Software Package ◽

Optical Pulses ◽

Capacitively Coupled ◽

Voltage Difference ◽

Left Handed ◽

Microwave Transmission ◽

Commercial Software Package

We present a new concept of the thermoelectric structure that generates microwave and terahertz signals when illuminated by femtosecond optical pulses. The structure consists of a series array of capacitively coupled thermocouples. The array acts as a hybrid type microwave transmission line with anomalous dispersion and phase velocity higher than the velocity of light. This allows for adding up the responces from all the thermocouples in phase. The array is easily integrable with microstrip transmission lines. Dispersion curves obtained from both the lumped network scheme and numerical simulations are presented. The connection of the thermocouples is a composite right/left-handed transmission line, which can receive terahertz radiation from the transmission line ports. The radiation of the photon to the surface of the thermocouple structure causes a voltage difference with the bandwidth of terahertz. We examined a lossy composite right/left-handed transmission line to extract the circuit elements. The calculated properties of the design are extracted by employing commercial software package CST STUDIO SUITE.

Download Full-text