scholarly journals Impact Response of Nanofluid-Reinforced Antiballistic Kevlar Fabrics

10.5772/50411 ◽  
2012 ◽  
Author(s):  
Roberto Pastore ◽  
Giorgio Giannini ◽  
Ramon Bueno ◽  
Mario Marchetti ◽  
Davide Micheli
Keyword(s):  
Impact Response

Influence of Ply Stacking Sequences on the Impact Response of Carbon Fibre Reinforced Polymer Composite Laminates

2019 ◽  
Author(s):  
Kristian Gjerrestad Andersen ◽  
Gbanaibolou Jombo ◽  
Sikiru Oluwarotimi Ismail ◽  
Segun Adeyemi ◽  
Rajini N ◽  
...  
Keyword(s):  
Carbon Fibre ◽  
Polymer Composite ◽  
Composite Laminates ◽  
Impact Response ◽  
Reinforced Polymer ◽  
Carbon Fibre Reinforced Polymer ◽  
Fibre Reinforced Polymer ◽  
The Impact

scholarly journals Viscous-like forces control the impact response of shear-thickening dense suspensions

2021 ◽  
Vol 923 ◽  
Author(s):  
Marc-Andre Brassard ◽  
Neil Causley ◽  
Nasser Krizou ◽  
Joshua A. Dijksman ◽  
Abram. H. Clark
Keyword(s):  
Shear Thickening ◽  
Impact Response ◽  
Dense Suspensions ◽  
The Impact

Abstract

Effect of long-term moisture exposure on impact response of glass-reinforced vinylester

2021 ◽  
pp. 147509022199616
Author(s):  
Fatemeh Alizadeh ◽  
Navid Kharghani ◽  
Carlos Guedes Soares
Keyword(s):  
Water Uptake ◽  
Failure Modes ◽  
Sea Water ◽  
Composite Plates ◽  
Impact Response ◽  
Low Velocity Impact ◽  
Water Type ◽  
Interfacial Damage ◽  
Impact Properties ◽  
The Impact

Glass/Vinylester composite laminates are comprehensively characterised to assess its impact response behaviour under moisture exposure in marine structures. An instrumented drop weight impact machine is utilised to determine the impact responses of dry and immersed specimens in normal, salted and sea water. The specimens, which had three different thicknesses, were subjected to water exposure for a very long period of over 20 months before tested in a low-velocity impact experiment. Water uptake was measured primarily to study the degradation profiles of GRP laminates after being permeated by water. Matrix dissolution and interfacial damage observed on the laminates after prolonged moisture exposure while the absorption behaviour was found typically non-Fickian. The weight of the composite plates firstly increased because of water diffusion up to month 15 and then decreased due to matrix degradation. The specimens with 3, 6 and 9 mm thickness exhibited maximum water absorption corresponding to 2.6%, 0.7% and 0.5% weight gain, respectively. In general, the results indicated that water uptake and impact properties were affected by thickness and less by water type. Impact properties of prolonged immersed specimens reduced remarkably, and intense failure modes detected almost in all cases. The least sensitive to impact damage were wet specimens with 9 mm thickness as they indicated similar maximum load and absorbed energy for different impact energies.

Comparative study on ballistic impact response of neat fabric, compliant, hybrid compliant and stiff composite

2021 ◽  
Vol 165 ◽  
pp. 107986
Author(s):  
Vishwas Mahesh ◽  
Sharnappa Joladarashi ◽  
Satyabodh M. Kulkarni
Keyword(s):  
Comparative Study ◽  
Ballistic Impact ◽  
Impact Response

Response and failure modes of biaxial warp-knitted flexible composite subject to low-velocity impact

2021 ◽  
pp. 152808372110154
Author(s):  
Ziyu Zhao ◽  
Tianming Liu ◽  
Pibo Ma
Keyword(s):  
Impact Energy ◽  
Linear Density ◽  
Failure Modes ◽  
Impact Response ◽  
Low Velocity Impact ◽  
Minor Effect ◽  
Low Velocity ◽  
Velocity Impact ◽  
Flexible Composites ◽  
The Impact

In this paper, biaxial warp-knitted fabrics were produced with different high tenacity polyester linear density and inserted yarns density. The low-velocity impact property of flexible composites made of polyurethane as matrix and biaxial warp-knitted fabric as reinforcement has been investigated. The effect of impactor shape and initial impact energy on the impact response of flexible composite is tested. The results show that the initial impact energy have minor effect on the impact response of the biaxial warp-knitted flexible composites. The impact resistance of flexible composite specimen increases with the increase of high tenacity polyester linear density and inserted yarns density. The damage morphology of flexible composite materials is completely different under different impactor shapes. The findings have theoretical and practical significance for the applications of biaxial warp-knitted flexible composite.

Sign in / Sign up

Export Citation Format

Share Document