scholarly journals Biomass Downdraft Gasifier Controller Using Intelligent Techniques

10.5772/48564 ◽  
2012 ◽  
Author(s):  
A. Sanjeevi ◽  
T. Kannadasan ◽  
R. Suresh
Keyword(s):  
Downdraft Gasifier

Techno-economic feasibility study on the application of downdraft gasifier in small-scale red clay bricks industries

2021 ◽  
Author(s):  
Murugan Paradesi Chockalingam ◽  
Navaneethakrishnan Palanisamy ◽  
Saji Raveendran Padmavathy ◽  
Edwin Mohan ◽  
Beno Wincy Winsly ◽  
...  
Keyword(s):  
Feasibility Study ◽  
Economic Feasibility ◽  
Small Scale ◽  
Red Clay ◽  
Downdraft Gasifier ◽  
Clay Bricks

scholarly journals Gasification and Power Generation Characteristics of Rice Husk, Sawdust, and Coconut Shell Using a Fixed-Bed Downdraft Gasifier

2021 ◽  
Vol 13 (4) ◽  
pp. 2027
Author(s):  
Md. Emdadul Hoque ◽  
Fazlur Rashid ◽  
Muhammad Aziz
Keyword(s):  
Rice Husk ◽  
Fixed Bed ◽  
Cost Effective ◽  
Coconut Shell ◽  
Energy Sources ◽  
Airflow Rate ◽  
Gas Generation ◽  
Biomass Feedstocks ◽  
Downdraft Gasifier ◽  
Synthetic Gas

Synthetic gas generated from the gasification of biomass feedstocks is one of the clean and sustainable energy sources. In this work, a fixed-bed downdraft gasifier was used to perform the gasification on a lab-scale of rice husk, sawdust, and coconut shell. The aim of this work is to find and compare the synthetic gas generation characteristics and prospects of sawdust and coconut shell with rice husk. A temperature range of 650–900 °C was used to conduct gasification of these three biomass feedstocks. The feed rate of rice husk, sawdust, and coconut shell was 3–5 kg/h, while the airflow rate was 2–3 m3/h. Experimental results show that the highest generated quantity of methane (vol.%) in synthetic gas was achieved by using coconut shell than sawdust and rice husk. It also shows that hydrogen production was higher in the gasification of coconut shell than sawdust and rice husk. In addition, emission generations in coconut shell gasification are lower than rice husk although emissions of rice husk gasification are even lower than fossil fuel. Rice husk, sawdust, and coconut shell are cost-effective biomass sources in Bangladesh. Therefore, the outcomes of this paper can be used to provide clean and economic energy sources for the near future.

Downdraft gasifier design calculation for biomass gasification using exhaust gas as a gasification agent

2021 ◽  
Author(s):  
Sherif Elshokary ◽  
Sherif Farag ◽  
OSayed Sayed Mohamed Abu-Elyazeed ◽  
Bitu Hurisso ◽  
Mostafa Ismai
Keyword(s):  
Biomass Gasification ◽  
Design Calculation ◽  
Exhaust Gas ◽  
Downdraft Gasifier

scholarly journals Simulation of a Downdraft Gasifier for Production of Syngas from Different Biomass Feedstocks

2021 ◽  
Vol 5 (2) ◽  
pp. 20
Author(s):  
Mateus Paiva ◽  
Admilson Vieira ◽  
Helder T. Gomes ◽  
Paulo Brito
Keyword(s):  
Modeling And Simulation ◽  
Pilot Scale ◽  
Operating Conditions ◽  
Fuel Gas ◽  
Heating Value ◽  
Downdraft Gasifier ◽  
Process Operation ◽  
Independent Parameters ◽  
Gasification Temperature ◽  
Main Operating

In the evaluation of gasification processes, estimating the composition of the fuel gas for different conditions is fundamental to identify the best operating conditions. In this way, modeling and simulation of gasification provide an analysis of the process performance, allowing for resource and time savings in pilot-scale process operation, as it predicts the behavior and analyzes the effects of different variables on the process. Thus, the focus of this work was the modeling and simulation of biomass gasification processes using the UniSim Design chemical process software, in order to satisfactorily reproduce the operation behavior of a downdraft gasifier. The study was performed for two residual biomasses (forest and agricultural) in order to predict the produced syngas composition. The reactors simulated gasification by minimizing the free energy of Gibbs. The main operating parameters considered were the equivalence ratio (ER), steam to biomass ratio (SBR), and gasification temperature (independent variables). In the simulations, a sensitivity analysis was carried out, where the effects of these parameters on the composition of syngas, flow of syngas, and heating value (dependent variables) were studied, in order to maximize these three variables in the process with the choice of the best parameters of operation. The model is able to predict the performance of the gasifier and it is qualified to analyze the behavior of the independent parameters in the gasification results. With a temperature between 850 and 950 °C, SBR up to 0.2, and ER between 0.3 and 0.5, the best operating conditions are obtained for maximizing the composition of the syngas in CO and H2.

Co-gasification of Different Biomass Feedstock in a Pilot-Scale (24 kWe) Downdraft Gasifier: An Experimental Approach

Energy ◽  
2021 ◽  
pp. 121821
Author(s):  
Muhammad Awais ◽  
Muhammad Mubashar Omar ◽  
Anjum Munir ◽  
Wei li ◽  
Muhammad Ajmal ◽  
...  
Keyword(s):  
Experimental Approach ◽  
Pilot Scale ◽  
Biomass Feedstock ◽  
Downdraft Gasifier

Shifting of the flame front in a small-scale commercial downdraft gasifier by water injection and exhaust gas recirculation

Fuel ◽  
2021 ◽  
Vol 303 ◽  
pp. 121297
Author(s):  
A. Zachl ◽  
M. Buchmayr ◽  
J. Gruber ◽  
A. Anca-Couce ◽  
R. Scharler ◽  
...  
Keyword(s):  
Flame Front ◽  
Water Injection ◽  
Exhaust Gas Recirculation ◽  
Small Scale ◽  
Exhaust Gas ◽  
Downdraft Gasifier ◽  
Gas Recirculation
Sign in / Sign up

Export Citation Format

Share Document