scholarly journals Cervical Spine Anthropometric and Finite Element Biomechanical Analysis

10.5772/35524 ◽  
2012 ◽  
Author(s):  
Susan Hueston ◽  
Mbulelo Makola ◽  
Isaac Mabe ◽  
Tarun Goswami
Keyword(s):  
Finite Element ◽  
Cervical Spine ◽  
Biomechanical Analysis

Establishment and validation of finite element model of ossification of cervical posterior longitudinal ligament with intervertebral fusion

2020 ◽  
Author(s):  
Li Hui ◽  
Liu Huiqing ◽  
Zhang Yaning
Keyword(s):  
Finite Element ◽  
Cervical Spine ◽  
Finite Element Model ◽  
Three Dimensional ◽  
Element Model ◽  
Posterior Longitudinal Ligament ◽  
Intervertebral Discs ◽  
Biomechanical Analysis ◽  
Intervertebral Fusion ◽  
Dimensional Finite Element

Abstract [Background ]: To establish a three-dimensional finite element model of ossification of the posterior longitudinal ligament of the cervical spine with intervertebral fusion and verify its effectiveness, and provide a platform for finite element calculation and biomechanical analysis in the later stage.[Method]: Select the Department of Spinal Surgery, Linfen People's Hospital A volunteer imported 719 DICOM format images of cervical spine CT scans into Mimics modeling software to build a preliminary 3D model in the stl format, and used Geomagic Studio 2013 software to refine and refine the 3D model to smooth out noise and generate NURBS surfaces The model was then imported into the finite element analysis software Ansys workbench 15.0, adding ligaments and intervertebral discs, meshing, assigning material properties, and simulating 6 activities of the human cervical spine, and comparing them with references.[Results]: A total of 7 Cervical vertebral body, 1 thoracic vertebral body, 5 intervertebral discs and ligaments, etc., with a total of 320512 nodes and 180905 units. It has a realistic appearance, high degree of detail reduction, and ossification of the cervical longitudinal longitudinal ligament with good geometric similarity Incorporate a three-dimensional finite element model of intervertebral fusion. In flexion and extension, left and right lateral flexion, and axial rotation activity compared with references, there is not much difference.[Conclusion]: OPLL merger interbody fusion dimensional finite element model has good mechanical and geometric similarity after similarity cervical established in this study, the model can provide a platform for the latter to further biomechanical analysis.

Biomechanical Analysis of Cervical Finite Element Model

2013 ◽  
Vol 273 ◽  
pp. 845-850
Author(s):  
Dong Mei Wu ◽  
Li Tao Zhang ◽  
Jun Zhao
Keyword(s):  
Finite Element ◽  
Cervical Spine ◽  
Finite Element Model ◽  
Cervical Vertebrae ◽  
Element Model ◽  
Biomechanical Analysis ◽  
Cervical Disc ◽  
Control Group ◽  
Cervical Disc Replacement ◽  
Surgery Group

The finite element method is often used in the field of biomechanical analysis. It can study the mechanical response of the internal organization without any experiments on the human body. The paper studies the biomechanics of the cervical spine by the method of finite element analysis. Firstly, the finite element model of the cervical spine including cervical vertebrae and soft tissue is constructed. Secondly, biomechanical analysis of cervical finite element model which is validated to be reasonable and reliable is completed. The results of the control group, the anterior cervical decompression and fusion surgery group, and the artificial cervical disc replacement surgery group are obtained to study the motion degree and ligament force of cervical spine. Thirdly, the summary of the biomechanical analysis of cervical finite element model is concluded.

scholarly journals Biomechanical Analysis of the Cervical Spine Following Disc Degeneration, Disc Fusion, and Disc Replacement: A Finite Element Study

10.14444/6066 ◽  
2019 ◽  
Vol 13 (6) ◽  
pp. 491-500
Author(s):  
ANUP A. GANDHI ◽  
NICOLE M. GROSLAND ◽  
NICOLE A. KALLEMEYN ◽  
SWATHI KODE ◽  
DOUGLAS C. FREDERICKS ◽  
...  
Keyword(s):  
Finite Element ◽  
Cervical Spine ◽  
Disc Degeneration ◽  
Biomechanical Analysis ◽  
Disc Replacement ◽  
Finite Element Study ◽  
Element Study

scholarly journals Biomechanical characteristics of tibio-femoral joint after partial medial meniscectomy in different flexion angles: a finite element analysis

2021 ◽  
Vol 22 (1) ◽  
Author(s):  
Xiaohui Zhang ◽  
Shuo Yuan ◽  
Jun Wang ◽  
Bagen Liao ◽  
De Liang
Keyword(s):  
Finite Element ◽  
Articular Cartilage ◽  
Finite Element Model ◽  
Medial Meniscus ◽  
Lateral Meniscus ◽  
Element Model ◽  
Magnetic Resonance Images ◽  
Biomechanical Analysis ◽  
Joint Stress ◽  
Tibiofemoral Joint

Abstract Background Recent studies have pointed out that arthroscopy, the commonly-used surgical procedure for meniscal tears, may lead to an elevated risk of knee osteoarthritis (KOA). The biomechanical factors of KOA can be clarified by the biomechanical analysis after arthroscopic partial meniscectomy (APM). This study aimed to elucidate the cartilage stress and meniscus displacement of the tibiofemoral joint under flexion and rotation loads after APM. Methods A detailed finite element model of the knee bone, cartilage, meniscus, and major ligaments was established by combining computed tomography and magnetic resonance images. Vertical load and front load were applied to simulate different knee buckling angles. At the same time, by simulating flexion of different degrees and internal and external rotations, the stresses on tibiofemoral articular cartilage and meniscus displacement were evaluated. Results Generally, the contact stress on both the femoral tibial articular cartilage and the meniscus increased with the increased flexion degree. Moreover, the maximum stress on the tibial plateau gradually moved backward. The maximum position shift value of the lateral meniscus was larger than that of the medial meniscus. Conclusion Our finite element model provides a realistic three-dimensional model to evaluate the influence of different joint range of motion and rotating tibiofemoral joint stress distribution. The decreased displacement of the medial meniscus may explain the higher pressure on the knee components. These characteristics of the medial tibiofemoral joint indicate the potential biomechanical risk of knee degeneration.

A New Computer Simulation of Neck Injury Biomechanics

2011 ◽  
Vol 467-469 ◽  
pp. 339-344
Author(s):  
Na Li ◽  
Jian Xin Liu
Keyword(s):  
Finite Element ◽  
Cervical Spine ◽  
Head And Neck ◽  
Traffic Accidents ◽  
Ethical Issues ◽  
Human Head ◽  
Element Model ◽  
Neck Injury ◽  
Element Analysis ◽  
Injury Mechanisms

Head and neck injuries are the most frequent severe injury resulting from traffic accidents. Neck injury mechanisms are difficult to study experimentally due to the variety of impact conditions involved, as well as ethical issues, such as the use of human cadavers and animals. Finite element analysis is a comprehensive computer aided mathematical method through which human head and neck impact tolerance can be investigated. Detailed cervical spine models are necessary to better understand cervical spine response to loading, improve our understanding of injury mechanisms, and specifically for predicting occupant response and injury in auto crash scenarios. The focus of this study was to develop a C1–C2 finite element model with optimized mechanical parameter. The most advanced material data available were then incorporated using appropriate nonlinear constitutive models to provide accurate predictions of response at physiological levels of loading. This optimization method was the first utilized in biomechanics understanding, the C1–C2 model forms the basis for the development of a full cervical spine model. Future studies will focus on tissue-level injury prediction and dynamic response.

FEBio finite element model of a pediatric cervical spine

2021 ◽  
pp. 1-7
Author(s):  
Sean M. Finley ◽  
J. Harley Astin ◽  
Evan Joyce ◽  
Andrew T. Dailey ◽  
Douglas L. Brockmeyer ◽  
...  
Keyword(s):  
Finite Element ◽  
Cervical Spine ◽  
Finite Element Model ◽  
Material Properties ◽  
Surgical Simulation ◽  
Element Model ◽  
Axial Stiffness ◽  
Published Data ◽  
Axial Tension ◽  
Flexion Extension

OBJECTIVE The underlying biomechanical differences between the pediatric and adult cervical spine are incompletely understood. Computational spine modeling can address that knowledge gap. Using a computational method known as finite element modeling, the authors describe the creation and evaluation of a complete pediatric cervical spine model. METHODS Using a thin-slice CT scan of the cervical spine from a 5-year-old boy, a 3D model was created for finite element analysis. The material properties and boundary and loading conditions were created and model analysis performed using open-source software. Because the precise material properties of the pediatric cervical spine are not known, a published parametric approach of scaling adult properties by 50%, 25%, and 10% was used. Each scaled finite element model (FEM) underwent two types of simulations for pediatric cadaver testing (axial tension and cardinal ranges of motion [ROMs]) to assess axial stiffness, ROM, and facet joint force (FJF). The authors evaluated the axial stiffness and flexion-extension ROM predicted by the model using previously published experimental measurements obtained from pediatric cadaveric tissues. RESULTS In the axial tension simulation, the model with 50% adult ligamentous and annulus material properties predicted an axial stiffness of 49 N/mm, which corresponded with previously published data from similarly aged cadavers (46.1 ± 9.6 N/mm). In the flexion-extension simulation, the same 50% model predicted an ROM that was within the range of the similarly aged cohort of cadavers. The subaxial FJFs predicted by the model in extension, lateral bending, and axial rotation were in the range of 1–4 N and, as expected, tended to increase as the ligament and disc material properties decreased. CONCLUSIONS A pediatric cervical spine FEM was created that accurately predicts axial tension and flexion-extension ROM when ligamentous and annulus material properties are reduced to 50% of published adult properties. This model shows promise for use in surgical simulation procedures and as a normal comparison for disease-specific FEMs.

Sign in / Sign up

Export Citation Format

Share Document