scholarly journals Using Acoustic Emission to Evaluate Fracture Toughness Energy Release Rate (GI) at Mode I Delamination of Composite Materials

10.5772/31834 ◽  
2012 ◽  
Author(s):  
Amir Refahi ◽  
Andrea Zucchelli ◽  
Mehdi Ahmadi ◽  
Giangiacomo Minak
Keyword(s):  
Fracture Toughness ◽  
Acoustic Emission ◽  
Composite Materials ◽  
Energy Release Rate ◽  
Energy Release ◽  
Release Rate ◽  
Mode I ◽  
Mode I Delamination

Mode I Fracture Toughness of a Tri-Layered Beam with Interfacial Crack

2012 ◽  
Vol 166-169 ◽  
pp. 245-248
Author(s):  
Shiuh Chuan Her ◽  
Wei Bo Su
Keyword(s):  
Fracture Toughness ◽  
Energy Release Rate ◽  
Energy Release ◽  
Release Rate ◽  
Strain Energy ◽  
Strain Energy Release Rate ◽  
Strain Energy Release ◽  
Mode I ◽  
Analytical Prediction ◽  
Layered Beam

A tri-layered cracked beam under opening loading is developed for the interfacial fracture toughness measurement. Determination of the mode I strain energy release rate along the second and third layers of the tri-layered beam is carried out analytically. The analytical prediction of the strain energy release rate is validated with the finite element results. The influences of the layer thickness and Young’s modulus on the strain energy release rate are examined through a parametric study.

The Effects of In-Service Induced Reduction of Bonding Quality on the Mode I, II, and I-II Fracture Toughness of CNT Nanocomposites

2016 ◽  
Author(s):  
Masoud Yekani Fard ◽  
Brian Raji ◽  
John M. Woodward ◽  
Aditi Chattopadhyay
Keyword(s):  
Fracture Toughness ◽  
Energy Release Rate ◽  
Energy Release ◽  
Release Rate ◽  
Accelerated Aging ◽  
Beam Theory ◽  
Mode I ◽  
Mode Ii ◽  
Initiation And Propagation ◽  
Calibration Methods

Tests were carried out to determine the interlaminar fracture toughness of stitch-bonded biaxial polymer matrix carbon nanotube nanocomposites for mode I, II, and I-II including durability effects. Analysis of the test specimens in terms of mode I energy release rates showed good agreement among Modified Beam Theory, Compliance Calibration, and Modified Compliance Calibration methods. End-Notched Flexure (ENF) and four point End-Notched Flexure (4ENF) tests gave very consistent crack initiation and propagation results for mode II fracture. The results show that the critical mode I energy release rate for delamination decreases monotonically with increasing mode II loading. The effects of accelerated aging (60°C and 90% Rh) on fracture properties were studied. Early accelerated aging (0–12 months) has the dominant diminishing effect on energy release rate initiation and propagation in composites and nanocomposites.

The Spherical Indentation Approach for Fracture Toughness Evaluation: A Study Based on the Energy Release Rate

2018 ◽  
Author(s):  
Tairui Zhang ◽  
Weiqiang Wang ◽  
Aiju Li
Keyword(s):  
Fracture Toughness ◽  
Energy Release Rate ◽  
Energy Release ◽  
Release Rate ◽  
Damage Mechanism ◽  
Tensile Tests ◽  
Uniaxial Tensile ◽  
Spherical Indentation ◽  
Material Damage ◽  
Fracture Tests

In this study, we investigated the drawbacks of previous studies regarding the evaluation of fracture toughness from spherical indentation tests (SITs). This was achieved by an examination of the material damage mechanism during indentation tests, uniaxial tensile tests, and Mode I/II fracture tests. A new approach based on the energy release rate was proposed in this study to evaluate the fracture toughness of ductile metals. Scanning electron microscope (SEM) observations revealed that the mechanism for material damage during an indentation test was different with the material damage in uniaxial tensile tests and Mode I fracture tests, but similar to that in Mode II fracture tests. Thus, the energy release rate during SITs should be correlated with JIIC. Compared with previous studies, this new proposed method was more consistent with the actual damage mechanism and did not rely on the specific critical damage values. Experiments on SA508, SA533, 15CrMoR, and S30408 revealed that the maximum error from this energy release rate-based approach was no more than 13% when compared with their conventional counterparts (compact tension tests), and thus can meet the precision requirement of engineering applications.

The Edge Delamination Test: Measuring the Critical Adhesion Energy of Thin-Film Coatings, Part II: Mode Mixity & Application

1994 ◽  
Vol 338 ◽  
Author(s):  
Edward O. Shaffer ◽  
Scott A. Sikorski ◽  
Frederick J. McGarry
Keyword(s):  
Thin Film ◽  
Energy Release Rate ◽  
Energy Release ◽  
Release Rate ◽  
Strain Energy ◽  
Strain Energy Release Rate ◽  
Strain Energy Release ◽  
Mode I ◽  
Rigid Substrate ◽  
Edge Delamination

ABSTRACTThe edge delamination test (EDT) is being developed to measure the critical energy required to cause a thin film, under biaxial tensile stress, to debond from a rigid substrate[1]. The test uses circular features etched through biaxially stressed films adhered to a rigid substrate. If the stress is large enough, a stable debond ring grows radially about the feature. We use a finite element analysis to model the test, solving for the applied strain energy release rate as a function of crack length, feature hole radius and other geometrical parameters. The model identifies both mode I and mode II components of the strain energy release rate, and agrees with previous analytical solutions for the total debond energy. However, the model predicts, with a very refined mesh at the crack tip, the fracture process is pure mode I. To explore this result, critical strain energy release rates from the EDT and the island blister test (IBT) are compared. This agreement supports the model prediction that the failure process in the EDT is modeI peeling.

scholarly journals Crack Growth and Energy Release Rate for an Angled Crack under Mixed Mode Loading

2020 ◽  
Vol 10 (12) ◽  
pp. 4227
Author(s):  
Yali Yang ◽  
Seok Jae Chu ◽  
Wei song Huang ◽  
Hao Chen
Keyword(s):  
Energy Release Rate ◽  
Numerical Method ◽  
Energy Release ◽  
Release Rate ◽  
Mixed Mode ◽  
Crack Tip ◽  
Theoretical Expression ◽  
Propagation Mechanism ◽  
Mode I ◽  
Theoretical Derivation

The evaluation of energy release rate with angle is still a challenging task in metal crack propagation analysis, especially for the mixed Mode I-II-III loading situation. In this paper, the energy release rate associated with stress intensity factors at an arbitrary angle under mixed mode loadings has been investigated using both a numerical method and theoretical derivation. A relatively simple and precise numerical method was established through a series of spatial-inclined ellipses in Mode I-II and ellipsoids in Mode I-II-III, with different propagation angles computed from simulation. Meanwhile, a theoretical expression of the energy release rate with angle for a crack tip under a I-II-III mixed mode crack was deduced based on the propagation mechanism of the crack tip under the influence of a stress field. It is confirmed that the theoretical expression deduced could provide results as accurately as the present numerical method. The present results were confirmed to be effective and accurate by comparison with experimental data and other literature.

Sign in / Sign up

Export Citation Format

Share Document