Modeling and Investigation of One-Dimensional Flexural Vibrating Mechatronic Systems with Piezoelectric Transducers

The TOFD method, which is widely used in ultrasonic flaw detection, makes it possible to distinguish a crack from a volume reflector by the phase of the echo signals and to determine its height with high accuracy. However, the TOFD method without scanning the piezoelectric transducers across the weld joint does not allow to determine the displacement of the reflector from the center of the welded joint, which is very important when evaluating the results of the control. The scanning devices used for this purpose have a complex design, their price is higher than that of one-dimensional scanning devices, and, most importantly, the control time increases significantly. If the echo signals reflected from the bottom of the object of control are used, taking into account the change in the wave type, then a combined image of the reflector can be obtained from a set of partial images recovered by the digital focusing antenna (DFA) method. If we use the echo signals measured in the combined mode for each piezoelectric converter, we can estimate the displacement of the reflector across the welded joint with an accuracy of ±1.5 mm. Numerical and model experiments have confirmed the efficiency of the proposed approach.

Download Full-text

A one-dimensional self-gravitating stellar gas

Symposium - International Astronomical Union ◽

10.1017/s0074180900105261 ◽

1966 ◽

Vol 25 ◽

pp. 46-48 ◽

Cited By ~ 2

Author(s):

M. Lecar

Keyword(s):

Gravitational Field ◽

Phase Space ◽

Motion Picture ◽

Space Distribution ◽

Two Dimensional ◽

One Dimensional ◽

Phase Space Distribution ◽

Dimensional Phase Space ◽

The Mean

“Dynamical mixing”, i.e. relaxation of a stellar phase space distribution through interaction with the mean gravitational field, is numerically investigated for a one-dimensional self-gravitating stellar gas. Qualitative results are presented in the form of a motion picture of the flow of phase points (representing homogeneous slabs of stars) in two-dimensional phase space.

Download Full-text

Electron-Mirror Microscopic Aspects of Ferroelectric Domains of BaTiO3 And Ca2Sr (C2H5CO2)6

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100069387 ◽

1970 ◽

Vol 28 ◽

pp. 478-479

Author(s):

Teruo Someya ◽

Jinzo Kobayashi

Keyword(s):

Surface Layer ◽

Electric Fields ◽

Quantitative Study ◽

Recent Progress ◽

Ferroelectric Domain ◽

Resolving Power ◽

Surface Pattern ◽

Crystal Surfaces ◽

One Dimensional ◽

Ferroelectric Domains

Recent progress in the electron-mirror microscopy (EMM), e.g., an improvement of its resolving power together with an increase of the magnification makes it useful for investigating the ferroelectric domain physics. English has recently observed the domain texture in the surface layer of BaTiO3. The present authors ) have developed a theory by which one can evaluate small one-dimensional electric fields and/or topographic step heights in the crystal surfaces from their EMM pictures. This theory was applied to a quantitative study of the surface pattern of BaTiO3).

Download Full-text

Structure and function of neural networks in the retina

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100102213 ◽

1988 ◽

Vol 46 ◽

pp. 26-27

Author(s):

Peter Sterling

Keyword(s):

Ganglion Cells ◽

Three Dimensional ◽

Structure And Function ◽

Synaptic Connections ◽

Visual Axis ◽

One Dimensional ◽

Cat Retina ◽

Ultrathin Sections ◽

And Function ◽

Insight Into

The synaptic connections in cat retina that link photoreceptors to ganglion cells have been analyzed quantitatively. Our approach has been to prepare serial, ultrathin sections and photograph en montage at low magnification (˜2000X) in the electron microscope. Six series, 100-300 sections long, have been prepared over the last decade. They derive from different cats but always from the same region of retina, about one degree from the center of the visual axis. The material has been analyzed by reconstructing adjacent neurons in each array and then identifying systematically the synaptic connections between arrays. Most reconstructions were done manually by tracing the outlines of processes in successive sections onto acetate sheets aligned on a cartoonist's jig. The tracings were then digitized, stacked by computer, and printed with the hidden lines removed. The results have provided rather than the usual one-dimensional account of pathways, a three-dimensional account of circuits. From this has emerged insight into the functional architecture.

Download Full-text

Intergrowth of modulated structures in high Tc Bi-Sr-Ca-Cu-O superconductors

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100173510 ◽

1990 ◽

Vol 48 (4) ◽

pp. 76-77

Author(s):

A.Q. He ◽

G.W. Qiao ◽

J. Zhu ◽

H.Q. Ye

Keyword(s):

Twin Structure ◽

Modulated Structure ◽

High Tc ◽

One Dimensional ◽

Lattice Constants ◽

Superconducting Phases ◽

Modulated Structures ◽

Layer Structures

Since the first discovery of high Tc Bi-Sr-Ca-Cu-O superconductor by Maeda et al, many EM works have been done on it. The results show that the superconducting phases have a type of ordered layer structures similar to that in Y-Ba-Cu-O system formulated in Bi2Sr2Can−1CunO2n+4 (n=1,2,3) (simply called 22(n-1) phase) with lattice constants of a=0.358, b=0.382nm but the length of c being different according to the different value of n in the formulate. Unlike the twin structure observed in the Y-Ba-Cu-O system, there is an incommensurate modulated structure in the superconducting phases of Bi system superconductors. Modulated wavelengths of both 1.3 and 2.7 nm have been observed in the 2212 phase. This communication mainly presents the intergrowth of these two kinds of one-dimensional modulated structures in 2212 phase.

Download Full-text

Electronic structure studies of conducting polymers by electron energy-loss spectroscopy

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100163265 ◽

1996 ◽

Vol 54 ◽

pp. 160-161

Author(s):

J. Fink

Keyword(s):

Electronic Structure ◽

Conducting Polymers ◽

Conjugated Polymers ◽

Electron Acceptors ◽

Electron Donors ◽

Light Emitting ◽

One Dimensional ◽

New Class ◽

Electrical Conductivities ◽

Electron Energy Loss

Conducting polymers comprises a new class of materials achieving electrical conductivities which rival those of the best metals. The parent compounds (conjugated polymers) are quasi-one-dimensional semiconductors. These polymers can be doped by electron acceptors or electron donors. The prototype of these materials is polyacetylene (PA). There are various other conjugated polymers such as polyparaphenylene, polyphenylenevinylene, polypoyrrole or polythiophene. The doped systems, i.e. the conducting polymers, have intersting potential technological applications such as replacement of conventional metals in electronic shielding and antistatic equipment, rechargable batteries, and flexible light emitting diodes.Although these systems have been investigated almost 20 years, the electronic structure of the doped metallic systems is not clear and even the reason for the gap in undoped semiconducting systems is under discussion.

Download Full-text