scholarly journals Review on Current Analytical Methods with Chromatographic and Nonchromatographic Techniques for New Generation Insecticide Neonicotinoids

10.5772/28032 ◽  
2012 ◽  
Author(s):  
Eiki Watanabe
Keyword(s):  
Analytical Methods ◽  
New Generation

scholarly journals Tetraconatan phylogeny with special focus on Malacostraca and Branchiopoda: highlighting the strength of taxon-specific matrices in phylogenomics

2018 ◽  
Vol 285 (1885) ◽  
pp. 20181524 ◽  
Author(s):  
Martin Schwentner ◽  
Stefan Richter ◽  
D. Christopher Rogers ◽  
Gonzalo Giribet
Keyword(s):  
Amino Acid ◽  
Analytical Methods ◽  
Special Focus ◽  
Evolutionary Models ◽  
Phylogenomic Analyses ◽  
New Generation ◽  
Analytical Approaches ◽  
Internal Relationships ◽  
Complete Matrix ◽  
Phylogenomic Study

Understanding the evolution of Tetraconata or Pancrustacea—the clade that includes crustaceans and insects—requires a well-resolved hypothesis regarding the relationships within and among its constituent taxa. Here, we assembled a taxon-rich phylogenomic dataset focusing on crustacean lineages based solely on genomes and new-generation Illumina-generated transcriptomes, including 89 representatives of Tetraconata. This constitutes, to our knowledge, the first phylogenomic study specifically addressing internal relationships of Malacostraca (with 26 species included) and Branchiopoda (36 species). Seven matrices comprising 81–684 orthogroups and 17 690–242 530 amino acid positions were assembled and analysed under five different analytical approaches. To maximize gene occupancy and to improve resolution, taxon-specific matrices were designed for Malacostraca and Branchiopoda. Key tetraconatan taxa (i.e. Oligostraca, Multicrustacea, Branchiopoda, Malacostraca, Thecostraca, Copepoda and Hexapoda) were monophyletic and well supported. Within Branchiopoda, Phyllopoda, Diplostraca, Cladoceromorpha and Cladocera were monophyletic. Within Malacostraca, the clades Eumalacostraca, Decapoda and Reptantia were well supported. Recovery of Caridoida or Peracarida was highly dependent on the analysis for the complete matrix, but it was consistently monophyletic in the malacostracan-specific matrices. From such examples, we demonstrate that taxon-specific matrices and particular evolutionary models and analytical methods, namely CAT-GTR and Dayhoff recoding, outperform other approaches in resolving certain recalcitrant nodes in phylogenomic analyses.

Finding the Right Problems: Some HREM Applications to Interfaces

1984 ◽  
Vol 42 ◽  
pp. 376-379
Author(s):  
D. Cherns
Keyword(s):  
Grain Boundaries ◽  
High Resolution Electron Microscopy ◽  
Boundary Structure ◽  
Atomic Structures ◽  
Grain Boundary Structure ◽  
Resolution Electron ◽  
Point To Point ◽  
The Right ◽  
New Generation ◽  
Better Than

The use of high resolution electron microscopy (HREM) to determine the atomic structure of grain boundaries and interfaces is a topic of great current interest. Grain boundary structure has been considered for many years as central to an understanding of the mechanical and transport properties of materials. Some more recent attention has focussed on the atomic structures of metalsemiconductor interfaces which are believed to control electrical properties of contacts. The atomic structures of interfaces in semiconductor or metal multilayers is an area of growing interest for understanding the unusual electrical or mechanical properties which these new materials possess. However, although the point-to-point resolutions of currently available HREMs, ∼2-3Å, appear sufficient to solve many of these problems, few atomic models of grain boundaries and interfaces have been derived. Moreover, with a new generation of 300-400kV instruments promising resolutions in the 1.6-2.0 Å range, and resolutions better than 1.5Å expected from specialist instruments, it is an appropriate time to consider the usefulness of HREM for interface studies.

Total etch dentin bonding systems: scanning electron microscopy of the resin-dentin hybrid layer

1992 ◽  
Vol 50 (2) ◽  
pp. 1092-1093
Author(s):  
Jorge Perdigao
Keyword(s):  
Composite Resin ◽  
Mechanical Interlocking ◽  
Hybrid Layer ◽  
Agent Based ◽  
Dentin Bonding ◽  
Acid Agent ◽  
Bond Strengths ◽  
Main Component ◽  
Bonding Systems ◽  
New Generation

In 1955, Buonocore introduced the etching of enamel with phosphoric acid. Bonding to enamel was created by mechanical interlocking of resin tags with enamel prisms. Enamel is an inert tissue whose main component is hydroxyapatite (98% by weight). Conversely, dentin is a wet living tissue crossed by tubules containing cellular extensions of the dental pulp. Dentin consists of 18% of organic material, primarily collagen. Several generations of dentin bonding systems (DBS) have been studied in the last 20 years. The dentin bond strengths associated with these DBS have been constantly lower than the enamel bond strengths. Recently, a new generation of DBS has been described. They are applied in three steps: an acid agent on enamel and dentin (total etch technique), two mixed primers and a bonding agent based on a methacrylate resin. They are supposed to bond composite resin to wet dentin through dentin organic component, forming a peculiar blended structure that is part tooth and part resin: the hybrid layer.

Low-voltage, high-resolution scanning electron microscopy of polymers

1987 ◽  
Vol 45 ◽  
pp. 466-467 ◽  
Author(s):  
S. J. Krause ◽  
W.W. Adams ◽  
S. Kumar ◽  
T. Reilly ◽  
T. Suziki
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Low Voltage ◽  
Chromatic Aberration ◽  
Image Resolution ◽  
Resolution Limit ◽  
Crossover Point ◽  
New Generation ◽  
Beam Damage ◽  
Scanning Electron

Scanning electron microscopy (SEM) of polymers at routine operating voltages of 15 to 25 keV can lead to beam damage and sample image distortion due to charging. Imaging polymer samples with low accelerating voltages (0.1 to 2.0 keV), at or near the “crossover point”, can reduce beam damage, eliminate charging, and improve contrast of surface detail. However, at low voltage, beam brightness is reduced and image resolution is degraded due to chromatic aberration. A new generation of instruments has improved brightness at low voltages, but a typical SEM with a tungsten hairpin filament will have a resolution limit of about 100nm at 1keV. Recently, a new field emission gun (FEG) SEM, the Hitachi S900, was introduced with a reported resolution of 0.8nm at 30keV and 5nm at 1keV. In this research we are reporting the results of imaging coated and uncoated polymer samples at accelerating voltages between 1keV and 30keV in a tungsten hairpin SEM and in the Hitachi S900 FEG SEM.

Stereo modeling of HVEM specimens by serial tilting and computer graphics

1986 ◽  
Vol 44 ◽  
pp. 34-35
Author(s):  
J.R. McIntosh ◽  
D.L. Stemple ◽  
William Bishop ◽  
G.W. Hannaway
Keyword(s):  
Computer Graphics ◽  
Analytical Methods ◽  
Photographic Film ◽  
Complex Structures ◽  
Multiple Objects ◽  
Multiple Images ◽  
3 Dimensional

EM specimens often contain 3-dimensional information that is lost during micrography on a single photographic film. Two images of one specimen at appropriate orientations give a stereo view, but complex structures composed of multiple objects of graded density that superimpose in each projection are often difficult to decipher in stereo. Several analytical methods for 3-D reconstruction from multiple images of a serially tilted specimen are available, but they are all time-consuming and computationally intense.

3-Dimensional immunolabeling and in situ hybridization detection using fluorescence photooxidation and intermediate-voltage Electron Microscopy

1994 ◽  
Vol 52 ◽  
pp. 164-165
Author(s):  
Thomas J. Deerinck ◽  
Maryann E. Martone ◽  
Varda Lev-Ram ◽  
David P. L. Green ◽  
Roger Y. Tsien ◽  
...  
Keyword(s):  
Laser Scanning ◽  
Reactive Oxygen ◽  
Confocal Laser Scanning Microscope ◽  
Fluorescent Dye ◽  
Confocal Laser ◽  
3 Dimensional ◽  
Voltage Electron ◽  
Dimensional Distribution ◽  
Electron Microscopes ◽  
New Generation

The confocal laser scanning microscope has become a powerful tool in the study of the 3-dimensional distribution of proteins and specific nucleic acid sequences in cells and tissues. This is also proving to be true for a new generation of high contrast intermediate voltage electron microscopes (IVEM). Until recently, the number of labeling techniques that could be employed to allow examination of the same sample with both confocal and IVEM was rather limited. One method that can be used to take full advantage of these two technologies is fluorescence photooxidation. Specimens are labeled by a fluorescent dye and viewed with confocal microscopy followed by fluorescence photooxidation of diaminobenzidine (DAB). In this technique, a fluorescent dye is used to photooxidize DAB into an osmiophilic reaction product that can be subsequently visualized with the electron microscope. The precise reaction mechanism by which the photooxidation occurs is not known but evidence suggests that the radiationless transfer of energy from the excited-state dye molecule undergoing the phenomenon of intersystem crossing leads to the formation of reactive oxygen species such as singlet oxygen. It is this reactive oxygen that is likely crucial in the photooxidation of DAB.

Recent developments in low-voltage SEM of polymers

1993 ◽  
Vol 51 ◽  
pp. 866-867
Author(s):  
S.J. Krause ◽  
W.W. Adams
Keyword(s):  
Low Voltage ◽  
Chromatic Aberration ◽  
Thermal Electron ◽  
Analytical Technique ◽  
Recent Developments ◽  
Beam Currents ◽  
New Generation ◽  
First Time ◽  
Voltage Scanning ◽  
Beam Damage

Over the past decade low voltage scanning electron microscopy (LVSEM) of polymers has evolved from an interesting curiosity to a powerful analytical technique. This development has been driven by improved instrumentation and in particular, reliable field emission gun (FEG) SEMs. The usefulness of LVSEM has also grown because of an improved theoretical and experimental understanding of sample-beam interactions and by advances in sample preparation and operating techniques. This paper will review progress in polymer LVSEM and present recent results and developments in the field.In the early 1980s a new generation of SEMs produced beam currents that were sufficient to allow imaging at low voltages from 5keV to 0.5 keV. Thus, for the first time, it became possible to routinely image uncoated polymers at voltages below their negative charging threshold, the "second crossover", E2 (Fig. 1). LVSEM also improved contrast and reduced beam damage in sputter metal coated polymers. Unfortunately, resolution was limited to a few tenths of a micron due to the low brightness and chromatic aberration of thermal electron emission sources.

The Contribution of Intermediate-Voltage, High-Resolution Electron Microscopy In Materials Science: An Appraisal

1990 ◽  
Vol 48 (1) ◽  
pp. 478-479
Author(s):  
John L. Hutchison
Keyword(s):  
High Resolution ◽  
Materials Science ◽  
High Resolution Electron Microscopy ◽  
Optical Diffraction ◽  
The Past ◽  
Resolution Electron ◽  
Extreme Sensitivity ◽  
Electron Microscopes ◽  
New Generation ◽  
Small Metal Particles

Over the past five years or so the development of a new generation of high resolution electron microscopes operating routinely in the 300-400 kilovolt range has produced a dramatic increase in resolution, to around 1.6 Å for “structure resolution” and approaching 1.2 Å for information limits. With a large number of such instruments now in operation it is timely to assess their impact in the various areas of materials science where they are now being used. Are they falling short of the early expectations? Generally, the manufacturers’ claims regarding resolution are being met, but one unexpected factor which has emerged is the extreme sensitivity of these instruments to both floor-borne and acoustic vibrations. Successful measures to counteract these disturbances may require the use of special anti-vibration blocks, or even simple oil-filled dampers together with springs, with heavy curtaining around the microscope room to reduce noise levels. In assessing performance levels, optical diffraction analysis is becoming the accepted method, with rotational averaging useful for obtaining a good measure of information limits. It is worth noting here that microscope alignment becomes very critical for the highest resolution.In attempting an appraisal of the contributions of intermediate voltage HREMs to materials science we will outline a few of the areas where they are most widely used. These include semiconductors, oxides, and small metal particles, in addition to metals and minerals.

Sign in / Sign up

Export Citation Format

Share Document