scholarly journals Micro-Topographic Characteristics in Coordinate with Surface Erosion

10.5772/23251 ◽  
2011 ◽  
Author(s):  
Qingfeng Zhang ◽  
Longshan Zhao ◽  
Faqi Wu ◽  
Jian Wang
Keyword(s):  
Surface Erosion ◽  
Topographic Characteristics

scholarly journals WATERSHED TOPOGRAPHIC CHARACTERISTICS AND CAUSES ANALYSIS OF THE UPPER REACHES OF THE WEIHE RIVER

2020 ◽  
Vol XLII-3/W10 ◽  
pp. 471-477
Author(s):  
Z. H. Liu ◽  
L. Han ◽  
T. T. Wu ◽  
C. Y. Du ◽  
N. Cao
Keyword(s):  
Transitional Period ◽  
Tectonic Activity ◽  
Surface Erosion ◽  
Mean Values ◽  
Hypsometric Integral ◽  
Basin Topography ◽  
Regional Tectonic ◽  
Weihe River ◽  
Topographic Characteristics ◽  
The Mean

Abstract. The morphology of watershed is the most intuitive information carrier to reflect regional tectonic activity, surface erosion and morphologic evolution. Active tectonic and fluvial system play a significant role in patterns and characters of regional morphology. Taking twenty-nine tributaries of the upper reaches of the Weihe River as the main study objects, four parameters, such as gully density (GD), basin topography ratio (BTR), roundness ratio (RR), river longitudinal profile fitting exponent (RLPFE), etc., were used to quantitatively analyse the topographic characteristics in this area. To reveal the main cause of the characteristics, the hypsometric integral (HI) were also applied in this area. The results showed that: (1) There is a positive linear function between basin topography ratio (BTR) and mean slope, and the mean values of four indexes in northern channels are smaller than southern channels; (2) The mean HI value is 0.44, indicating that the main topographic characteristics of this area is in maturity, which is in the transitional period of adjustment of the deep erosion and uplift movement; (3) The main cause of this topographic changes is tectonic. These results are consistent with other geological background, and will enrich regional basin morphology research and tectonic activity evaluation, provide important basic data for regional disaster prediction and analysis of soil and water loss.

Comments on collision mechanics in ring systems

1984 ◽  
Vol 75 ◽  
pp. 407-422
Author(s):  
William K. Hartmann
Keyword(s):  
Asteroid Belt ◽  
Surface Erosion ◽  
Surface Layers ◽  
Ring Systems ◽  
Eclipse Observations ◽  
Saturn’S Rings ◽  
Saturn's Rings

ABSTRACTThe nature of collisions within ring systems is reviewed with emphasis on Saturn's rings. The particles may have coherent icy cores and less coherent granular or frosty surface layers, consistent with thermal eclipse observations. Present-day collisions of such ring particles do not cause catastrophic fragmentation of the particles, although some minor surface erosion and reaccretion is possible. Evolution by collisional fragmentation is thus not as important as in the asteroid belt.

IDENTIFICAÇÃO DAS FEIÇÔES GRANÍTICAS DO MUNICÍPO DE IRAUÇUBA-CEARÁ

2019 ◽  
Vol 21 (2) ◽  
pp. 51-61
Author(s):  
Abner Monteiro Nunes Cordeiro ◽  
Rayane Barroso Araújo ◽  
Frederico De Holanda Bastos ◽  
Augusto César Praciano Sampaio
Keyword(s):  
Field Work ◽  
Granitic Rocks ◽  
Surface Erosion ◽  
Climatic Fluctuations ◽  
Geological Faults ◽  
Dry Climates ◽  
Evolution Understanding ◽  
Geomorphological Features

A exumação de rochas graníticas do Complexo Tamboril-Santa Quitéria, especificamente, na superfície de aplainamento do município de Irauçuba, Ceará, tem revelado uma grande variedade de feições geomorfológicas que se justificam por fatores litológicos e evidentes flutuações climáticas cenozoicas, comandadas, sobretudo, por morfogênese mecânica, associada a climas secos. São relevos residuais como, maciços, cristas, inselbergs, inselguebergs, lajedos e blocos saprolitizados (boulders) em diferentes graus de desenvolvimento que se sobressaem em meio à superfície erosiva rebaixada, regionalmente conhecida como depressão sertaneja. Nesse trabalho, foram identificadas diferentes formas de relevo granítico condicionadas, sobretudo por intempéries de subsuperfície, controladas por falhas e fraturas, e por remoção do regolito através da erosão superficial, além de eventos de esfoliação. Essas formas graníticas constituem peças fundamentais na compreensão da evolução paleoclimática do município de Irauçuba. Para a realização do presente trabalho foram usadas as seguintes metodologias: revisão bibliográfica, levantamento cartográfico e trabalho de campo.Palavras-chave: Feições graníticas; Superfícies de aplainamento; Erosão diferencial. ABSTRACTThe granitic rocks exhumation of Complexo Tamboril-Santa Quitéria, specifically, on the planing surface of Irauçuba county, Ceará, has revealed a great variety of geomorphological features that are justified by lithologic factors and evident Cenozoic climatic fluctuations, mainly, headed by mechanical morphogenesis, associated with dry climates. Residual reliefs like rocky massives, residual ridges, inselbergs and inselguebergs, slab stones and boulders in different degrees of development stand out in the middle of the lowered erosive surface, regionally known by “depressão sertaneja”. In this study, different forms of granite relief were identified, specially conditioned by subsurface erosion, controlled by geological faults and fractures, but also by regolith removal through surface erosion, plus exfoliation spheroidal events. These granitic features are fundamental in paleoclimatic evolution understanding of Irauçuba municipality. For the accomplishment of the present work the following methodology was used: bibliographical revision, cartographic survey and field work. For the accomplishment of the present work the following methodology was used: bibliographical revision, cartographic survey and field work.Keywords: Granitic features; Planing surface; Differential erosion.RESUMENLa exhumación de rocas graníticas del Complejo tamboril-Santa Quitéria, específicamente en la superficie de aplanado del municipio de Irauçuba, Ceará, ha revelado una gran variedad de rasgos geomorfológicos que se justifican por factores litológicos y evidentes fluctuaciones climáticas cenozoicas, comandadas principalmente por morfogénesis mecánica, asociada a climas secos. Son relieves residuales como, macizos, crestas, Inselbergs, inselguebergs, losas y bloques saprolitizados (Boulders) en diferentes grados de desarrollo que sobresalen en medio de la superficie erosiva rebajada, regionalmente conocida como depresión sertaneja. En este trabajo, se identificaron diferentes formas de relieve granítico condicionadas, principalmente por intemperies de subsuperficie, controladas por fallas y fracturas, y por eliminación del regolito a través de la erosión superficial, además de eventos de exfoliación. Estas formas graníticas constituyen piezas fundamentales en la comprensión de la evolución paleoclimática del municipio de Irauçuba. Para la realización del presente trabajo se utilizaron las siguientes metodologías: revisión bibliográfica, levantamiento cartográfico y trabajo de campo.Palabras clave: Facciones graníticas; Superficies de aplanado; Erosión diferencial.

Effect of Topography on Maize Grains Elemental Profile: A Chemometric Approach

2020 ◽  
Vol 16 (8) ◽  
pp. 1079-1087
Author(s):  
Jorgelina Z. Heredia ◽  
Carlos A. Moldes ◽  
Raúl A. Gil ◽  
José M. Camiña
Keyword(s):  
Cluster Analysis ◽  
Discriminant Analysis ◽  
Linear Discriminant Analysis ◽  
Microwave Plasma ◽  
Emission Spectrometry ◽  
Linear Discriminant ◽  
Maize Seeds ◽  
Elemental Profile ◽  
Mineral Profile ◽  
Topographic Characteristics

Background: The elemental composition of maize grains depends on the soil, land and environment characteristics where the crop grows. These effects are important to evaluate the availability of nutrients with complex dynamics, such as the concentration of macro and micronutrients in soils, which can vary according to different topographies. There is available scarce information about the influence of topographic characteristics (upland and lowland) where culture is developed with the mineral composition of crop products, in the present case, maize seeds. On the other hand, the study of the topographic effect on crops using multivariate analysis tools has not been reported. Objective: This paper assesses the effect of topographic conditions on plants, analyzing the mineral profiles in maize seeds obtained in two land conditions: uplands and lowlands. Materials and Methods: The mineral profile was studied by microwave plasma atomic emission spectrometry. Samples were collected from lowlands and uplands of cultivable lands of the north-east of La Pampa province, Argentina. Results: Differentiation of maize seeds collected from both topographical areas was achieved by principal components analysis (PCA), cluster analysis (CA) and linear discriminant analysis (LDA). PCA model based on mineral profile allowed to differentiate seeds from upland and lowlands by the influence of Cr and Mg variables. A significant accumulation of Cr and Mg in seeds from lowlands was observed. Cluster analysis confirmed such grouping but also, linear discriminant analysis achieved a correct classification of both the crops, showing the effect of topography on elemental profile. Conclusions: Multi-elemental analysis combined with chemometric tools proved useful to assess the effect of topographic characteristics on crops.

INTERPRETATION OF SURFACE EROSION AS SHEAR FAILURE OF SOIL CAUSED BY SURFACE FLOW

2018 ◽  
Vol 74 (5) ◽  
pp. I_901-I_906
Author(s):  
Yosuke HIGO ◽  
Shinichiro ONDA ◽  
Daiki TAKANO ◽  
Toshiki YAMAUCHI
Keyword(s):  
Shear Failure ◽  
Surface Flow ◽  
Surface Erosion

scholarly journals Poly(ethylene glycol)-b-poly(1,3-trimethylene carbonate) Copolymers for the Formulation of In Situ Forming Depot Long-Acting Injectables

Pharmaceutics ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 605
Author(s):  
Marie-Emérentienne Cagnon ◽  
Silvio Curia ◽  
Juliette Serindoux ◽  
Jean-Manuel Cros ◽  
Feifei Ng ◽  
...  
Keyword(s):  
Ethylene Glycol ◽  
Surface Erosion ◽  
Sustained Delivery ◽  
Trimethylene Carbonate ◽  
Poly Ethylene Glycol ◽  
In Situ Forming ◽  
Poly Ethylene ◽  
Long Acting

This article describes the utilization of (methoxy)poly(ethylene glycol)-b-poly(1,3-trimethylene carbonate) ((m)PEG–PTMC) diblock and triblock copolymers for the formulation of in situ forming depot long-acting injectables by solvent exchange. The results shown in this manuscript demonstrate that it is possible to achieve long-term drug deliveries from suspension formulations prepared with these copolymers, with release durations up to several months in vitro. The utilization of copolymers with different PEG and PTMC molecular weights affords to modulate the release profile and duration. A pharmacokinetic study in rats with meloxicam confirmed the feasibility of achieving at least 28 days of sustained delivery by using this technology while showing good local tolerability in the subcutaneous environment. The characterization of the depots at the end of the in vivo study suggests that the rapid phase exchange upon administration and the surface erosion of the resulting depots are driving the delivery kinetics from suspension formulations. Due to the widely accepted utilization of meloxicam as an analgesic drug for animal care, the results shown in this article are of special interest for the development of veterinary products aiming at a very long-term sustained delivery of this therapeutic molecule.

scholarly journals Multi-Analytical Framework to Assess the In Vitro Swallowability of Solid Oral Dosage Forms Targeting Patient Acceptability and Adherence

Pharmaceutics ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 411
Author(s):  
Abdul Latif Ershad ◽  
Ali Rajabi-Siahboomi ◽  
Shahrzad Missaghi ◽  
Daniel Kirby ◽  
Afzal Rahman Mohammed
Keyword(s):  
Hydroxypropyl Methylcellulose ◽  
Analytical Framework ◽  
Dosage Forms ◽  
Oral Dosage ◽  
Surface Erosion ◽  
World Population ◽  
Swallowing Problems ◽  
Solid Oral Dosage Forms ◽  
Oral Dosage Forms

A lack of effective intervention in addressing patient non-adherence and the acceptability of solid oral dosage forms combined with the clinical consequences of swallowing problems in an ageing world population highlight the need for developing methods to study the swallowability of tablets. Due to the absence of suitable techniques, this study developed various in vitro analytical tools to assess physical properties governing the swallowing process of tablets by mimicking static and dynamic stages of time-independent oral transitioning events. Non-anatomical models with oral mucosa-mimicking surfaces were developed to assess the swallowability of tablets; an SLA 3D printed in vitro oral apparatus derived the coefficient of sliding friction and a friction sledge for a modified tensometer measured the shear adhesion profile. Film coat hydration and in vitro wettability was evaluated using a high-speed recording camera that provided quantitative measurements of micro-thickness changes, simulating static in vivo tablet–mucosa oral processing stages with artificial saliva. In order to ascertain the discriminatory power and validate the multianalytical framework, a range of commonly available tablet coating solutions and new compositions developed in our lab were comparatively evaluated according to a quantitative swallowability index that describes the mathematical relationship between the critical physical forces governing swallowability. This study showed that the absence of a film coat significantly impeded the ease of tablet gliding properties and formed chalky residues caused by immediate tablet surface erosion. Novel gelatin- and λ-carrageenan-based film coats exhibited an enhanced lubricity, lesser resistance to tangential motion, and reduced stickiness than polyvinyl alcohol (PVA)–PEG graft copolymer, hydroxypropyl methylcellulose (HPMC), and PVA-coated tablets; however, Opadry® EZ possessed the lowest friction–adhesion profile at 1.53 a.u., with the lowest work of adhesion profile at 1.28 J/mm2. For the first time, the in vitro analytical framework in this study provides a fast, cost-effective, and repeatable swallowability ranking method to screen the in vitro swallowability of solid oral medicines in an effort to aid formulators and the pharmaceutical industry to develop easy-to-swallow formulations.

scholarly journals Hybrid Approach for Wood Modification: Characterization and Evaluation of Weathering Resistance of Coatings on Acetylated Wood

Coatings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 658
Author(s):  
Anna Sandak ◽  
Edit Földvári-Nagy ◽  
Faksawat Poohphajai ◽  
Rene Herrera Diaz ◽  
Oihana Gordobil ◽  
...  
Keyword(s):  
Service Life ◽  
Hybrid Approach ◽  
Wood Properties ◽  
Wood Products ◽  
Superior Performance ◽  
Surface Erosion ◽  
Coating Film ◽  
Chemical Treatments ◽  
Cellular Wall ◽  
Bulk Substrate

Wood, as a biological material, is sensitive to environmental conditions and microorganisms; therefore, wood products require protective measures to extend their service life in outdoor applications. Several modification processes are available for the improvement of wood properties, including commercially available solutions. Among the chemical treatments, acetylation by acetic anhydride is one of the most effective methods to induce chemical changes in the constitutive polymers at the cellular wall level. Acetylation reduces wood shrinkage-swelling, increases its durability against biotic agents, improves UV resistance and reduces surface erosion. However, even if the expected service life for external cladding of acetylated wood is estimated to be 60 years, the aesthetics change rapidly during the first years of exposure. Hybrid, or fusion, modification includes processes where the positive effect of a single treatment can be multiplied by merging with additional follow-up modifications. This report presents results of the performance tests of wood samples that, besides the modification by means of acetylation, were additionally protected with seven commercially available coatings. Natural weathering was conducted in Northern Italy for 15 months. Samples were characterized with numerous instruments by measuring samples collected from the stand every three months. Superior performance was observed on samples that merged both treatments. It is due to the combined effect of the wood acetylation and surface coating. Limited shrinkage/swelling of the bulk substrate due to chemical treatment substantially reduced stresses of the coating film. Hybrid process, compared to sole acetylation of wood, assured superior visual performance of the wood surface by preserving its original appearance.

Sign in / Sign up

Export Citation Format

Share Document