scholarly journals Induction Machine Vector and Direct Torque Control Improvement during the Flux Weakening Phase

10.5772/15004 ◽  
2011 ◽  
Author(s):  
Kasmieh Tarek
Keyword(s):  
Direct Torque Control ◽  
Induction Machine ◽  
Torque Control ◽  
Flux Weakening

scholarly journals Hardware Implementation of FTC of Induction Machine on FPGA

2017 ◽  
Vol 20 (2) ◽  
pp. 76
Author(s):  
S. Boukadida ◽  
S. Gdaim ◽  
A. Mtibaa
Keyword(s):  
Digital Signal Processor ◽  
Fault Tolerant ◽  
Design Method ◽  
Direct Torque Control ◽  
Induction Machine ◽  
Digital Signal ◽  
Design Tool ◽  
Torque Control ◽  
Algorithm Efficiency ◽  
Comparison Results

In this paper, a new design method of Direct Torque Control using Space Vector Modulation (DTC-SVM) of an Induction Machine (IM), which is based on Fault Tolerant Control (FTC) is proposed. Due to its complexity, the FTC implemented on a microcontroller and a Digital Signal Processor (DSP) is characterized by a calculating delay. To solve this problem, an alternative digital solution is used, based on the Field Programmable Gate Array (FPGA), which is characterized by a fast processing speed. However, as an FPGAs increase in size, there is a need for improved productivity, and this includes new design flows and tools. Xilinx System Generator (XSG) is a high-level block-based design tool that offers bit and cycle accurate simulation. This tool can automatically generate the Very High-Density Logic (VHDL) code without resorting to a tough programming, without being obliged to do approximations and more we can visualize the behavior of the machine before implementation which is very important for not damage our machine. Simulation and experimental results using Hardware In the Loop (HIL) of the FTC based DTC-SVM is compared with those of the conventional DTC. The comparison results illustrate the reduction in the torque and stator flux ripples. Our purpose is to reveal our algorithm efficiency and to show the Xilinx Virtex V FPGA performances in terms of execution time. 

Simulink Implementation of Direct Torque Control Drive for Induction Machines

2011 ◽  
Vol 367 ◽  
pp. 89-96
Author(s):  
U. Zangina ◽  
H.N. Yahaya ◽  
M. Aminu ◽  
Z.O. Niyi
Keyword(s):  
Control Method ◽  
Direct Torque Control ◽  
Induction Machine ◽  
Induction Machines ◽  
Torque Control ◽  
Control Technique ◽  
Computational Time ◽  
Suitable Alternative ◽  
Control Scheme ◽  
Transient Operations

Direct Torque Control (DTC) has emerged over the last two decades as a suitable alternative to the well-known Field Oriented Control (FOC) or vector control technique for electric drives mainly due to its simple control scheme, low computational time and reduced parameter sensitivity. In this paper, speed control of an induction machine based on DTC strategy has been developed and a comprehensive study is presented. The performance of the control method has been demonstrated by simulations using the Matlab/Simulink software package. Several numerical simulations have been carried out in steady state and transient operations.

Sign in / Sign up

Export Citation Format

Share Document