scholarly journals An Ultra-Wideband (UWB) Ad Hoc Sensor Network for Real-time Indoor Localization of Emergency Responders

Author(s):  
Anthony Lo ◽  
Alexander Yarovoy ◽  
Timothy Bauge ◽  
Mark Russell ◽  
Dave Harmer ◽  
...  
2021 ◽  
Vol 2078 (1) ◽  
pp. 012070
Author(s):  
Qianrong Zhang ◽  
Yi Li

Abstract Ultra-wideband (UWB) has broad application prospects in the field of indoor localization. In order to make up for the shortcomings of ultra-wideband that is easily affected by the environment, a positioning method based on the fusion of infrared vision and ultra-wideband is proposed. Infrared vision assists locating by identifying artificial landmarks attached to the ceiling. UWB uses an adaptive weight positioning algorithm to improve the positioning accuracy of the edge of the UWB positioning coverage area. Extended Kalman filter (EKF) is used to fuse the real-time location information of the two. Finally, the intelligent mobile vehicle-mounted platform is used to collect infrared images and UWB ranging information in the indoor environment to verify the fusion method. Experimental results show that the fusion positioning method is better than any positioning method, has the advantages of low cost, real-time performance, and robustness, and can achieve centimeter-level positioning accuracy.


2012 ◽  
Author(s):  
Emmanuel Odei-Lartey ◽  
Klaus Hartmann ◽  
Hamidreza Ahmadian
Keyword(s):  
Ad Hoc ◽  

Sensors ◽  
2020 ◽  
Vol 20 (21) ◽  
pp. 6278 ◽  
Author(s):  
Damir Arbula ◽  
Sandi Ljubic

Accurate, inexpensive, and reliable real-time indoor localization holds the key to the full potential of the context-aware applications and location-based Internet of Things (IoT) services. State-of-the-art indoor localization systems are coping with the complex non-line-of-sight (NLOS) signal propagation which hinders the use of proven multiangulation and multilateration methods, as well as with prohibitive installation costs, computational demands, and energy requirements. In this paper, we present a novel sensor utilizing low-range infrared (IR) signal in the line-of-sight (LOS) context providing high precision angle-of-arrival (AoA) estimation. The proposed sensor is used in the pragmatic solution to the localization problem that avoids NLOS propagation issues by exploiting the powerful concept of the wireless sensor network (WSN). To demonstrate the proposed solution, we applied it in the challenging context of the supermarket cart navigation. In this specific use case, a proof-of-concept navigation system was implemented with the following components: IR-AoA sensor prototype and the corresponding WSN used for cart localization, server-side application programming interface (API), and client application suite consisting of smartphone and smartwatch applications. The localization performance of the proposed solution was assessed in, altogether, four evaluation procedures, including both empirical and simulation settings. The evaluation outcomes are ranging from centimeter-level accuracy achieved in static-1D context up to 1 m mean localization error obtained for a mobile cart moving at 140 cm/s in a 2D setup. These results show that, for the supermarket context, appropriate localization accuracy can be achieved, along with the real-time navigation support, using readily available IR technology with inexpensive hardware components.


2018 ◽  
Vol 15 (4) ◽  
pp. 172988141879576 ◽  
Author(s):  
Pavol Galajda ◽  
Alena Galajdova ◽  
Stanislav Slovak ◽  
Martin Pecovsky ◽  
Milos Drutarovsky ◽  
...  

In this article, the ultra-wideband technology for localization and tracking of the robot gripper (behind the obstacles) in industrial environments is presented. We explore the possibilities of ultra-wideband radar sensor network employing the centralized data fusion method that can significantly improve tracking capabilities in a complex environment. In this article, we present ultra-wideband radar sensor network hardware demonstrator that uses a new wireless ultra-wideband sensor with an embedded controller to detect and track online or off-line movement of the robot gripper. This sensor uses M-sequence ultra-wideband radars front-end and low-cost powerful processors on a system on chip with the advanced RISC machines (ARM) architecture as a main signal processing block. The ARM-based single board computer ODROID-XU4 platform used in our ultra-wideband sensor can provide processing power for the preprocessing of received raw radar signals, algorithms for detection and estimation of target’s coordinates, and finally, compression of data sent to the data fusion center. Data streams of compressed target coordinates are sent from each sensor node to the data fusion center in the central node using standard the wireless local area network (WLAN) interface that is the feature of the ODROID-XU4 platform. The article contains experimental results from measurements where sensors and antennas are located behind the wall or opaque material. Experimental testing confirmed capability of real-time performance of developed ultra-wideband radar sensor network hardware and acceptable precision of software. The introduced modular architecture of ultra-wideband radar sensor network can be used for fast development and testing of new real-time localization and tracking applications in industrial environments.


Author(s):  
Nadia Ghariani ◽  
Mohamed Salah Karoui ◽  
Mondher Chaoui ◽  
Mongi Lahiani ◽  
Hamadi Ghariani

2020 ◽  
Author(s):  
Lakshmi Narayana Thalluri ◽  
Jitendra Prasad Ayodhya ◽  
Yuva Raju Chava ◽  
Bhimeswara Anjaneya Prasad Tati

Sign in / Sign up

Export Citation Format

Share Document