scholarly journals Application of Lattice Boltzmann Method in Fluid Flow and Heat Transfer

10.5772/10585 ◽  
2011 ◽  
Author(s):  
Quan Liao ◽  
Tien-Chien Je
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Lattice Boltzmann Method ◽  
Lattice Boltzmann ◽  
Flow And Heat Transfer ◽  
Boltzmann Method

Lattice Boltzmann simulation of convective flow and heat transfer in a nanofluid-filled hollow cavity

2019 ◽  
Vol 29 (9) ◽  
pp. 3075-3094
Author(s):  
Qiang Pu ◽  
Farhad Aalizadeh ◽  
Darya Aghamolaei ◽  
Mojtaba Masoumnezhad ◽  
Alireza Rahimi ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Rayleigh Number ◽  
Lattice Boltzmann Method ◽  
Lattice Boltzmann ◽  
Heat Transfer Performance ◽  
Transfer Performance ◽  
Content Type ◽  
Flow And Heat Transfer ◽  
Boltzmann Method

Purpose This paper aims to to simulate the flow and heat transfer during free convection in a square cavity using double-multi-relaxation time (MRT) lattice Boltzmann method. Design/methodology/approach The double-MRT lattice Boltzmann method is used, and the natural convection fluid flow and heat transfer under influence of different parameters are analyzed. The D2Q5 model and D2Q9 model are used for simulation of temperature field and flow field, respectively. The cavity is filled with CuO-water nanofluid; in addition, the thermo-physical properties of nanofluid and the effect of nanoparticles’ shapes are considered using Koo–Kleinstreuer–Li (KKL) model. On the other hand, the cavity is included with an internal active hollow with constant thermal boundary conditions at its walls and variable dimensions. It should be noted that the dimensions of the internal hollow will be determined by as aspect ratio. Findings The Rayleigh number, nanoparticle concentration and the aspect ratio are the governing parameters. The heat transfer performance of the cavity has direct relationship with the Rayleigh number and solid volume fraction of CuO-water nanofluid. Moreover, the configuration of the cavity is good controlling factor for changing the heat transfer performance and entropy generation. Originality/value The originality of this work is using double-MRT lattice Boltzmann method in simulating the free convection fluid flow and heat transfer.

Fluid Flow and Heat Transfer in a Curved Square Duct Using Lattice Boltzmann Method (LBM)

2007 ◽  
Author(s):  
Quan Liao ◽  
Tien-Chien Jen
Keyword(s):  
Heat Transfer ◽  
Experimental Data ◽  
Fluid Flow ◽  
Lattice Boltzmann Method ◽  
Lattice Boltzmann ◽  
Dean Number ◽  
Square Duct ◽  
Curvature Ratio ◽  
Flow And Heat Transfer ◽  
Boltzmann Method

In this paper, the 3DQ27 model of Lattice Boltzmann Method (LBM) is employed to simulate the fully-developed fluid flow and heat transfer in a curved square duct with curvature ratio (0.02–0.5) and Dean Number (0 – 200). The Dean instability in the curved square duct is fully investigated and a stability diagram is obtained with the parameters of curvature ratio and Dean number. It is found that for the square duct with high curvature ratio (i.e. curvature ratio is greater than 0.2) the onset of transition from single vortex pair to double vortex pairs depends on the Dean number and curvature ratio, while at the small curvature (i.e. curvature ratio is smaller than 0.1) the onset can be characterized by the Dean number alone. This is consistent with the results obtained from the conventional Computational Fluid Dynamic (CFD) method and experimental data. For the friction coefficient and Nusselt number, which are the functions of Dean number and curvature ratio, it was found that the present numerical results are in good agreement with the available experimental data and conventional CFD results within the given parameters range in this paper.

SIMULATION OF FLUID FLOW AND HEAT TRANSFER IN A PLANE CHANNEL USING THE LATTICE BOLTZMANN METHOD

2003 ◽  
Vol 17 (01n02) ◽  
pp. 183-187 ◽  
Author(s):  
G. H. TANG ◽  
W. Q. TAO ◽  
Y. L. HE
Keyword(s):  
Heat Transfer ◽  
Distribution Function ◽  
Lattice Boltzmann Method ◽  
Lattice Boltzmann ◽  
Plane Channel ◽  
Parallel Plates ◽  
Thermal Boundary Conditions ◽  
Flow And Heat Transfer ◽  
Forced Convective Flow ◽  
Boltzmann Method

Forced convective flow and heat transfer between two parallel plates are studied using the lattice Boltzmann method (LBM) in this paper. Three kinds of thermal boundary conditions at the top and bottom plates are studied. The velocity field is simulated using density distribution function while a separate internal energy distribution function is introduced to simulate the temperature field. The results agree well with data from traditional finite volume method (FVM) and analytical solutions. The present work indicates that LBM may be developed as a promising method for predicting convective heat transfer because of its many inherent advantages.

Numerical analysis of free convection and entropy generation in a cavity using compact finite-difference lattice Boltzmann method

2019 ◽  
Vol 30 (2) ◽  
pp. 977-995 ◽  
Author(s):  
HamidReza KhakRah ◽  
Payam Hooshmand ◽  
David Ross ◽  
Meysam Jamshidian
Keyword(s):  
Heat Transfer ◽  
Rayleigh Number ◽  
Finite Difference ◽  
Free Convection ◽  
Lattice Boltzmann Method ◽  
Entropy Generation ◽  
Lattice Boltzmann ◽  
Content Type ◽  
Flow And Heat Transfer ◽  
Boltzmann Method

Purpose The purpose of this paper is to investigate the compact finite-difference lattice Boltzmann method is used to simulate the free convection within a cavity. Design/methodology/approach The finite-difference discretization method enables the numerical simulations to be run when there are non-uniform and curvilinear grids with a finer near-wall grid resolution. Furthermore, the high-order method is applied in the numerical approach, which makes it possible to go with relatively coarse mesh in respect to simulations, which used classical lattice Boltzmann method. The configuration of the cavity is set to sine-walled square. In addition, the cavity is filled with Al2O3-water nanofluid, and the Koo–Kleinstreuer–Li model is used to estimate the properties of nanofluid. Findings The nanoparticle (Al2O3) concentration in the base fluid (water) is considered in a range of 0-0.04. The nanofluid flow and heat transfer are investigated in laminar regime with Rayleigh number in the range of 103-106. The second law analysis is used to study the effects of different governing parameters on the local and volumetric entropy generation. The Rayleigh number, configuration of the cavity and nanoparticle concentration are considered as the governing parameters. The results are mainly focused on the flow structure, temperature field, local and volumetric entropy generation and heat transfer performance. Originality/value The originality of this study is using of a modern numerical method supported by an accurate prediction for nanofluid properties to simulate the flow and heat transfer during natural convection in a cavity.

Sign in / Sign up

Export Citation Format

Share Document