scholarly journals Development of Removable Visual Impact Indicator or Polymer Composite Materials

2021 ◽  
Author(s):  
Sergejs VIDINEJEVS ◽  
Olga BULDERBERGA ◽  
Andrey ANISKEVICH
Keyword(s):  
Composite Materials ◽  
Polymer Composite ◽  
Polymer Composite Materials ◽  
Visual Response ◽  
Impact Indicator ◽  
Composite Surface ◽  
Drop Tests ◽  
Tape Storage ◽  
Visual Impact ◽  
The Impact

The prototype of removable visual impact indicator for thermoset polymer composite materials is developed, and its characteristics are experimentally determined. The indicator is a fabric tape glued by epoxy to the surface of the polymer composite. The tape is impregnated with a composition that provides a visual response at the place of an impact on the composite surface. Ball-drop tests demonstrated the increase of the magnitude of the visual response with the impact energy at different substrate hardnesses. The shelf-life and mode of the tape storage until commissioning are determined. Peel tests showed the ability to remove a used indicator without damaging the surface of the composite.

scholarly journals Classification of energy impacts by their effect on the structure and properties of reinforced reactoplasts

2021 ◽  
Vol 83 (2) ◽  
pp. 197-201
Author(s):  
I. V. Cheremukhina
Keyword(s):  
Composite Materials ◽  
Impact Strength ◽  
Polymer Composite ◽  
Polymer Composite Material ◽  
Polymer Chains ◽  
Polymer Composite Materials ◽  
Mesh Structure ◽  
Wave Nature ◽  
The Impact

The use of various physical influences is an economical and highly effective direction for regulating and improving the characteristics of the modified reinforced polymer composite materials developed in this work. The methods of energy effects studied in this work were used at the stage of impregnation of technical threads of various chemical nature with an oligomeric binder and a hardener (when preparing prepregs by the traditional method) or with a binder solution and a curing system (when preparing prepregs by the method of layered application of components) Based on the conducted research, a classification of the applied methods of physical modification according to the principle of the influence of energy fields is proposed. The studied methods of energy effects are divided into orienting and energetically energizing effects. The first group includes treatments with constant magnetic (PMP) or electric fields (PEP), and constant mechanical loads. The second group includes energy effects that have a wave nature (energetically energizing), and vibration, ultrasonic effects, and ultraviolet radiation are attributed to them. Modification methods of the first group contribute to a decrease in the mobility of binder molecules during curing, while the formation of branches of polymer chains occurs during the curing process, which leads to a predominant increase in the destructive stress during static bending. Energetically energizing effects contribute to the relative acceleration of the process of linear growth of polymer chains during curing, which is accompanied by the formation of a more sparsely cross-linked mesh structure, which leads to a predominant increase in impact strength. Of the two competing processes in the curing of epoxy oligomers, this one requires a higher activation energy, which is confirmed by the results of studies. Analyzing the results obtained, it can be concluded that the modification methods used in the work allow not only to obtain polymer composite materials with high strength characteristics, but also to directly adjust the properties of composites depending on the requirements for the products. Orienting modification methods lead to hardening of the resulting polymer composite material with a predominant increase in the destructive stress during static bending from 20 to 47%. When using energetically energizing influences in the technology of producing reinforced reactoplasts, the impact strength increases mainly from 19 to 40%.

IMPACT OF HIGH VOLTAGE ELECTRIC DISCHARGES ON THE CURED POLYMER COMPOSITE MATERIALS, MODIFIED IN A MICROWAVE ELECTROMAGNETIC FIELD

2020 ◽  
pp. 6-12
Author(s):  
I. V. Zlobina ◽  
A. A. Korotich
Keyword(s):  
Electromagnetic Field ◽  
Surface Layer ◽  
Composite Materials ◽  
Carbon Fiber ◽  
Minimum Wage ◽  
Polymer Composite ◽  
High Voltage ◽  
Polymer Composite Materials ◽  
Structural Elements ◽  
The Impact

Due to the widespread use of carbon fiber-reinforced polymer composite materials (PCM) in the structural elements of aircraft with a distributed surface layer of lightning-proof coating (MFP) in the form of metal grids to reduce the risk of lightning strikes and the possibility of increasing their strength characteristics by processing in the microwave electromagnetic field, the need to study the impact of this method of processing on the resistance of PCM to high voltage electrical discharges. The studies of the impact of the discharge voltage 180…200 kV on samples of PCM with the minimum wage and no minimum wage. It is established that pretreatment of samples of the cured polymer composite MW in a microwave electromagnetic field energy flux density (17…18)104 µw/cm2 does not degrade their molniezaschita characteristics and contributes to reducing the size of the damaged area up to 1.5 times. Samples processed in the microwave electromagnetic field without MSP do not have delaminations and burns in contrast to the control ones. The obtained results indicate the possibility of strengthening treatment in the microwave electromagnetic field of structural elements of carbon fiber distributed in the surface layer of the MSP in the form of a metal grid.

Impact Strength Analysis of Polymer Composite Materials (PCM) Fiber Reinforced in the Fiberboat Application

2020 ◽  
Vol 17 (2) ◽  
pp. 170-178
Author(s):  
Rezza Ruzuqi
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Impact Strength ◽  
Mechanical Testing ◽  
Polymer Composite ◽  
Impact Test ◽  
Polymer Composite Materials ◽  
Strength Analysis ◽  
Result Show ◽  
The Impact

Analysis of the mechanical properties of Polymer Composite Materials (PCM) fiberglass-reinforced is important for fiberboat manufacturing. Mechanical properties can be determined by carrying out mechanical testing. The mechanical properties of this research using the Impact test have been completed. In this research each test was carried out on variations in the amount of fiberglass lamination CSM 300, CSM 450 and WR 600 and the variation in weight percentages of 99.5% -0.5%, 99% -1%, 98.5% -1 , 5%, 98% -2% and 97.5% -2.5% have been used. The result show that the more the amount of laminate the greater impact strength, which is equal to 413,712 MPa, and the more the percentage hardener the greater the impact strength 2.0 wt .-%, which is equal to 416,487 MPa.

FSUE "VIAM" solvent-free binders for polymer composite materials

2016 ◽  
Vol 2 (2) ◽  
pp. 37-42 ◽  
Author(s):  
E. N. Kablov ◽  
L. V. Chursova ◽  
A. N. Babin ◽  
R. R. Mukhametov ◽  
N. N. Panina
Keyword(s):  
Composite Materials ◽  
Polymer Composite ◽  
Solvent Free ◽  
Polymer Composite Materials
Sign in / Sign up

Export Citation Format

Share Document