scholarly journals Nicotinic acid in nanocontainers. Encapsulation and release from ion exchangers

ADMET & DMPK ◽  
2019 ◽  
Vol 7 (1) ◽  
pp. 76-87
Author(s):  
Heinrich Altshuler ◽  
Elena Ostapova ◽  
Olga Altshuler ◽  
Galina Shkurenko ◽  
Natalya Malyshenko ◽  
...  
Keyword(s):  
Ion Exchange ◽  
Drug Release ◽  
Nicotinic Acid ◽  
Zirconium Phosphate ◽  
Cation Exchanger ◽  
Polymer Matrices ◽  
Ion Exchangers ◽  
Elution Rate ◽  
Dowex 1

The paper is devoted to the study of the ion exchange encapsulation of nicotinic acid in nanocontainers on polymer matrices. Dowex-50 cation exchanger, sulphonated polymer based on metacyclophanoctol, polymer zirconium phosphate, and strongly basic Dowex-1 anion exchanger are used as polymer matrices. It was confirmed that commercial ion exchangers can encapsulate up to 0.64 g of nicotinic acid per gram of polymer. The high elution rate of nicotinic acid from nanocontainers via the ion exchange mechanism makes it possible to achieve the desired pharmacokinetics of drug release in vivo.

scholarly journals Modulation of Drug Release from Natural Polymer Matrices by Response Surface Methodology: in vitro and in vivo Evaluation

2020 ◽  
Vol Volume 14 ◽  
pp. 5325-5336
Author(s):  
Afrasim Moin ◽  
Hosahalli V Gangadharappa ◽  
Mohd Adnan ◽  
Syed M Rizvi ◽  
Syed A Ashraf ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Drug Release ◽  
Response Surface ◽  
Polymer Matrices ◽  
Natural Polymer ◽  
In Vivo Evaluation

Role of Ion Exchange in Release of Biogenic Amines

Physiology ◽  
1989 ◽  
Vol 4 (2) ◽  
pp. 68-71 ◽  
Author(s):  
B Uvnas ◽  
C-H Aborg
Keyword(s):  
Mast Cells ◽  
Ion Exchange ◽  
Biogenic Amines ◽  
Chromaffin Cells ◽  
Ion Exchangers ◽  
Kinetics Of ◽  
Kinetics Of Ion Exchange

Mast cells, chromaffin cells, and nerves contain granule materials that have the characteristics of weak ion exchangers. Biogenic amines are stored in and released from these granules according to kinetics of ion exchange. Studies on isolated mast cells and on adrenals in vivo suggest that amines are released by ion exchange: cytoplasmic K+ being the releasing ion in the preexocytotic phase and Na+ in the exocytotic phase.

scholarly journals A New Hybrid EDTA–Zirconium Phosphate Cation-Exchanger: Synthesis, Characterization and Adsorption Behaviour for Environmental Monitoring

2009 ◽  
Vol 27 (4) ◽  
pp. 423-434 ◽  
Author(s):  
S.A. Nabi ◽  
Mu. Naushad ◽  
Rani Bushra
Keyword(s):  
Ion Exchange ◽  
Zirconium Phosphate ◽  
Cation Exchanger ◽  
Exchange Capacity ◽  
Ion Exchanger ◽  
Ion Exchange Capacity ◽  
Inorganic Ion ◽  
Ft Ir ◽  
Distribution Studies ◽  
Binary Separations

EDTA–zirconium phosphate has been synthesized as a new amorphous hybrid cation-exchanger by the combination of the inorganic ion-exchanger zirconium phosphate and EDTA, thereby providing a new class of organic–inorganic hybrid ion-exchanger with better mechanical and granular properties, a good ion-exchange capacity (2.40 mequiv/g dry exchanger for Na+), good reproducibility, and a higher stability and selectivity towards heavy metal ions. It has been characterized using FT-IR, TGA/DTA, X-ray and SEM methods, in addition to ion-exchange studies such as the determination of its ion-exchange capacity, elution and distribution behaviour, to provide a better understanding of the ion-exchange behaviour of the material. On the basis of distribution studies, the material was found to be highly selective towards Th(IV) and its selectivity was examined by achieving some important binary separations such as Cd(II)–Th(IV), Ni(II)–Th(IV), Hg(II)–Th(IV), Zn(II)–Th(IV), Pb(II)–Th(IV) and Al(III)–Th(IV) by column means, indicating its utility in environmental pollution control in one way or other.

Acyclovir Loaded Solid Lipid Nanoparticle Based Cream: A Novel Drug Delivery System

2017 ◽  
Vol 7 (1) ◽  
Author(s):  
EL- Assal I. A. ◽  
Retnowati .
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Antiviral Agent ◽  
Study Drug ◽  
Particle Size Analysis ◽  
Stability Study ◽  
Size Analysis ◽  
Solid Lipid ◽  
Dermal Delivery

Objective of the present investigation was enthused by the possibility to develop solid lipid nanoparticles (SLNs) of hydrophilic drug acyclovir. Also study vitro and vivo drug delivery. Methods: Drug loaded SLNs (ACV-SLNs) were prepared by high pressure homogenization of aqueous surfactant solutions containing the drug-loaded lipids in the melted or in the solid state with formula optimization study (Different lipid concentration, drug loaded, homogenization / stirring speed and compritol 888ATO: drug ratio). ACV - SLN incorporated in cream base. The pH was evaluated and rheological study. Drug release was evaluated and compared with simple cream- drug, ACV – SLN with compritol 888ATO and marketed cream. The potential of SLN as the carrier for dermal delivery was studied. Results: Particle size analysis of SLNs prove small, smooth, spherical shape particle ranged from 150 to 200 nm for unloaded and from 330 to 444 nm for ACV loaded particles. The EE% for optimal formula is 72% with suitable pH for skin application. Rheological behavior is shear thinning and thixotropic. Release study proved controlled drug release for SLNs especially in formula containing compritol88 ATO. Stability study emphasized an insignificant change in SLNs properties over 6 month. In-vivo study showed significantly higher accumulation of ACV in stratum corneum, dermal layer, and receptor compartment compared with blank skin. Conclusion: AVC-loaded SLNs might be beneficial in controlling drug release, stable and improving dermal delivery of antiviral agent(s).

Development and Evaluation of Floating Pulsatile Drug Delivery System Using Meloxicam

2017 ◽  
Vol 7 (04) ◽  
Author(s):  
ShirishaG. Suddala ◽  
S. K. Sahoo ◽  
M. R. Yamsani
Keyword(s):  
Rheumatoid Arthritis ◽  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Lag Time ◽  
Oral Dosage ◽  
Lag Phase ◽  
Pulsatile Drug Delivery

Objective: The objective of this research work was to develop and evaluate the floating– pulsatile drug delivery system (FPDDS) of meloxicam intended for Chrono pharmacotherapy of rheumatoid arthritis. Methods: The system consisting of drug containing core, coated with hydrophilic erodible polymer, which is responsible for a lag phase for pulsatile release, top cover buoyant layer was prepared with HPMC K4M and sodium bicarbonate, provides buoyancy to increase retention of the oral dosage form in the stomach. Meloxicam is a COX-2 inhibitor used to treat joint diseases such as osteoarthritis and rheumatoid arthritis. For rheumatoid arthritis Chrono pharmacotherapy has been recommended to ensure that the highest blood levels of the drug coincide with peak pain and stiffness. Result and discussion: The prepared tablets were characterized and found to exhibit satisfactory physico-chemical characteristics. Hence, the main objective of present work is to formulate FPDDS of meloxicam in order to achieve drug release after pre-determined lag phase. Developed formulations were evaluated for in vitro drug release studies, water uptake and erosion studies, floating behaviour and in vivo radiology studies. Results showed that a certain lag time before drug release which was due to the erosion of the hydrophilic erodible polymer. The lag time clearly depends on the type and amount of hydrophilic polymer which was applied on the inner cores. Floating time and floating lag time was controlled by quantity and composition of buoyant layer. In vivo radiology studies point out the capability of the system of longer residence time of the tablets in the gastric region and releasing the drug after a programmed lag time. Conclusion: The optimized formulation of the developed system provided a lag phase while showing the gastroretension followed by pulsatile drug release that would be beneficial for chronotherapy of rheumatoid arthritis and osteoarthritis.

Formulation, Development and Characterization of Floating Beads of Diltiazem Hydrochloride

2016 ◽  
Vol 6 (1) ◽  
Author(s):  
Anamika Saxena Saxena ◽  
Santosh Kitawat ◽  
Kalpesh Gaur ◽  
Virendra Singh
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery Systems ◽  
Entrapment Efficiency ◽  
Repeated Administration ◽  
Alginate Beads ◽  
Delivery Systems ◽  
Sem Analysis ◽  
Formulation Development

The main goal of any drug delivery system is to achieve desired concentration of the drug in blood or tissue, which is therapeutically effective and nontoxic for a prolonged period. Various attempts have been made to develop gastroretentive delivery systems such as high density system, swelling, floating system. The recent developments of FDDS including the physiological and formulation variables affecting gastric retention, approaches to design single-unit and multiple-unit floating systems, and their classification and formulation aspects are covered in detail. Gastric emptying is a complex process and makes in vivo performance of the drug delivery systems uncertain. In order to avoid this variability, efforts have been made to increase the retention time of the drug-delivery systems for more than 12 hours. The floating or hydrodynamically controlled drug delivery systems are useful in such application. Background of the research: Diltiazem HCL (DTZ), has short biological half life of 3-4 h, requires rather high frequency of administration. Due to repeated administration there may be chances of patient incompliance and toxicity problems. Objective: The objective of study was to develop sustained release alginate beads of DTZ for reduction in dosing frequency, high bioavailability and better patient compliance. Methodology: Five formulations prepared by using different drug to polymer ratios, were evaluated for relevant parameters and compared. Alginate beads were prepared by ionotropic external gelation technique using CaCl2 as cross linking agent. Prepared beads were evaluated for % yield, entrapment efficiency, swelling index in 0.1N HCL, drug release study and SEM analysis. In order to improve %EE and drug release, LMP and sunflower oil were used as copolymers along with sodium alginate.

Preparation and Evaluation of Gemifloxacin Mesylate Floating Matrix Tablets in Healthy Human Volunteers

2017 ◽  
Vol 10 (1) ◽  
pp. 3623-3630
Author(s):  
Bhikshapathi D. V. R. N. ◽  
Haarika B ◽  
Jyothi Sri S ◽  
K Abbulu
Keyword(s):  
Drug Release ◽  
Sodium Bicarbonate ◽  
Polymer Concentration ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
Physical Parameters ◽  
Drug Bioavailability ◽  
Floating Tablets

The purpose of present investigation was to develop floating matrix tablets of gemifloxacin mesylate, which after oral administration could prolong the gastric residence time, increase the drug bioavailability and diminish the side effects of irritating drugs. Tablets containing drug, various viscosity grades of hydroxypropyl methylcellulose such as HPMC K4M and HPMC K15M as matrix forming agent, Sodium bicarbonate as gas-forming agent and different additives were tested for their usefulness in formulating gastric floating tablets by direct compression method. The physical parameters, in vitro buoyancy, release characteristics and in vivo radiographic study were investigated in this study. The gemifloxacin mesylate floating tablets were prepared using HPMC K4M polymer giving more sustained drug release than the tablet containing HPMC K15M. All these formulations showed floating lag time of 30 to 47 sec and total floating time more than 12 h. The drug release was decreased when polymer concentration increases and gas generating agent decreases. Formulation that contains maximum concen-tration of both HPMC K15M and sodium bicarbonate (F9) showing sufficiently sustained with 99.2% of drug release at 12 h. The drug release from optimized formulation follows Higuchi model that indicates the diffusion controlled release. The best formulation (F9) was selected based on in vitro characteristics and used in vivo radiographic studies by incorporating barium sulphate as a radio-opaque agent and the tablet remained in the stomach for about 6 h.   

Design and In vivo Evaluation of Palonosetron HCl Mouth Dissolving Films in the Management of Chemotherapy-Induced Vomiting

2017 ◽  
Vol 10 (6) ◽  
pp. 3929-3936
Author(s):  
Y. Srinivasa Rao ◽  
K. Adinarayana Reddy
Keyword(s):  
Drug Release ◽  
Patient Compliance ◽  
Onset Of Action ◽  
In Vivo Evaluation ◽  
Disintegration Time ◽  
In Vitro Drug Release ◽  
Surface Ph ◽  
Drug Content

Fast dissolving oral delivery systems are solid dosage forms, which disintegrate or dissolve within 1 minute in the mouth without drinking water or chewing. Mouth dissolving film (MDF) is a better alternate to oral disintegrating tablets due to its novelty, ease of use and the consequent patient compliance. The purpose of this work was to develop mouth dissolving oral films of palonosetron HCl, an antiemetic drug especially used in the prevention and treatment of chemotherapy-induced nausea and vomiting. In the present work, the films were prepared by using solvent casting method with various polymers HPMC E3, E5 & E15 as a film base synthetic polymer, propylene glycol as a plasticizer and maltodextrin and other polymers. Films were found to be satisfactory when evaluated for thickness, in vitro drug release, folding endurance, drug content and disintegration time. The surface pH of all the films was found to be neutral. The in vitro drug release of optimized formulation F29 was found to be 99.55 ± 6.3 7% in 7 min. The optimized formulation F29 also showed satisfactory surface pH, drug content (99.38 ± 0.08 %), disintegration time of 8 seconds and good stability. FTIR data revealed that no interaction takes place between the drug and polymers used in the optimized formulation. In vitro and in vivo evaluation of the films confirmed their potential as an innovative dosage form to improve delivery and quick onset of action of Palonosetron Hydrochloride. Therefore, the mouth dissolving film of palonosetron is potentially useful for the treatment of emesis disease where quick onset of action is desired, also improved patient compliance.

Formulation and In Vivo Evaluation of Mucoadhesive Micro-spheres of Rebamipide, a Mucoprotective Drug for GIT Disorders

2018 ◽  
Vol 11 (3) ◽  
pp. 4089-4097
Author(s):  
Bhikshapathi D. V. R. N. ◽  
Kanteepan P
Keyword(s):  
Drug Release ◽  
Entrapment Efficiency ◽  
In Vivo Studies ◽  
Amino Acid Derivative ◽  
Release Mechanism ◽  
In Vivo Evaluation ◽  
In Vitro Drug Release ◽  
Percentage Yield

Rebamipide, an amino acid derivative of 2-(1H)-quinolinone, is used for mucosal protection, healing of gastroduodenal ulcers, and treatment of gastritis. The current research study aimed to develop novel gastro-retentive mucoadhesive microspheres of rebamipide using ionotropic gelation technique. Studies of micromeritic properties confirmed that microspheres were free flowing with good packability. The in vitro drug release showed the sustained release of rebamipide up to 99.23 ± 0.13% within 12 h whereas marketed product displayed the drug release of 95.15 ± 0.23% within 1 h. The release mechanism from microspheres followed the zero-order and Korsmeyer-Peppas (R2 = 0.915, 0.969), respectively. The optimized M12 formulation displayed optimum features, such as entrapment efficiency 97%, particle size 61.94 ± 0.11 µm, percentage yield 98%, swelling index 95% and mucoadhesiveness was 97%. FTIR studies revealed no major incompatibility between drug and excipients. SEM confirmed the particles were of spherical in shape. Optimized formulation (M12) were stable at 40°C ± 2°C/75% RH ± 5% RH for 6 months. In vivo studies were performed and kinetic parameters like Cmax, Tmax, AUC0-t, AUC0-∞, t1/2, and Kel  were calculated. The marketed product Cmax (3.15 ± 0.05 ng/mL) was higher than optimized formulation (2.58 ± 0.03 ng/mL). The optimized formulation AUC0-t (15.25 ± 1.14 ng.hr/mL), AUC0-∞ (19.42 ± 1.24 ng.hr/mL) was significantly higher than that of marketed product AUC0-t (10.21 ± 1.26 ng.hr/mL) and AUC0-∞ (13.15 ± 0.05 ng.hr/mL). These results indicate an optimized formulation bioavailability of 2.5-fold greater than marketed product.  

Preparation and Evaluation of a Gas Formation-based Multiple-Unit Gastro-Retentive Floating Delivery System of Dipyridamole

2012 ◽  
Vol 5 (1) ◽  
pp. 1607-1616
Author(s):  
Y. Madhusudan Rao ◽  
Katakam V V ◽  
S Reddy ◽  
J M Somagoni ◽  
P K Panakanti ◽  
...  
Keyword(s):  
Drug Release ◽  
Delivery System ◽  
Polymeric Membrane ◽  
Wet Granulation ◽  
Physical Parameters ◽  
Gastric Residence Time ◽  
Gas Formation ◽  
Multiple Unit ◽  
Model Drug

The aim of this study was to prepare mini tablets to be filled into a capsule that is designed to float on the gastric contents based on gas formation technique. The drug-containing core mini-tablets were prepared by wet granulation method followed by a coating of the core units with seal coating, an effervescent layer and a gas-entrapping polymeric membrane (Eudragit RS30D, RL30D). Dipyridamole, which is predominantly absorbed in the upper part of GI tract and unabsorbed/insoluble at the lower intestine, was used as a model drug. The effect of the preparative parameters like amount of the effervescent agent layered onto the seal coated units, type and coating level of the gas-entrapping polymeric membrane, floating ability and drug release properties of the multiple-unit FDDS were evaluated. The formulations were evaluated for pharmacopoeial quality control tests. Physical parameters were found to be within the acceptable limits. The system using Eudragit® RL30D as a gas-entrapping polymeric membrane exhibited floating properties. The time to float decreased as amount of the effervescent agent increased and coating level of gas-entrapping polymeric membrane decreased. The optimum system exhibited complete floating within 3 minutes and maintained that buoyancy over a period of 8 hours. The drug release was sustained and linear with the square root of time. Increasing the coating level of the gas-entrapping polymeric membrane decreased drug release. Both the rapid-floating and sustained-release properties were achieved in the multiple-unit floating delivery system developed in this study. The in vivo gastric residence time was examined by radiograms and it was found that the units remained in the stomach for about 6 hours. The analysis of the dissolution data after storage at 40°C and 75% RH for 6 months showed no significant change indicating good stability.

Sign in / Sign up

Export Citation Format

Share Document