A stand density management diagram for spruce–balsam fir mixtures in New Brunswick

2007 ◽  
Vol 83 (2) ◽  
pp. 187-197 ◽  
Author(s):  
Edwin Swift ◽  
Margaret Penner ◽  
Rolland Gagnon ◽  
Jason Knox
Keyword(s):  
Species Composition ◽  
New Brunswick ◽  
Stand Structure ◽  
Abies Balsamea ◽  
Stand Density ◽  
Forest Products ◽  
Balsam Fir ◽  
Mixed Stands ◽  
Pure Species ◽  
Stand Density Management

Balsam fir (Abies balsamea (L.) Mill.), red spruce (Picea rubens Sarg.), black spruce (P. mariana (Mill.) BSP), and white spruce (P. glauca (Moench) Voss) often form mixed stands throughout northeastern North America. After harvesting operations or natural disturbances, the resulting natural regeneration may require thinning prescriptions to achieve the desired future stand structure and associated forest products. Stand density management diagrams (SDMDs) can assist the forest manager in examining potential yield implications of stand density management decisions. Data from New Brunswick, Nova Scotia, and Quebec indicate a single SDMD is not appropriate for mixtures of balsam fir and spruce (red and black). The maximum size density line is flatter for mixtures than for pure species stands and the quadratic mean diameter isolines are affected by the species composition. The top height isolines are independent of species composition. The results indicate the SDMD for spruce–balsam fir mixtures needs to be dynamic, incorporating the species proportions. The SDMD has been incorporated into software that prompts the user for the balsam fir fraction and generates the appropriate SDMD. Key words: Acadian Forest Region, eastern species mixtures, thinning decisions

A stand density management diagram for balsam fir in New Brunswick

2006 ◽  
Vol 82 (5) ◽  
pp. 700-711 ◽  
Author(s):  
M. Penner ◽  
D E Swift ◽  
R. Gagnon ◽  
J. Brissette
Keyword(s):  
New Brunswick ◽  
Abies Balsamea ◽  
Stand Density ◽  
Maximum Size ◽  
Balsam Fir ◽  
Quadratic Mean ◽  
Stand Management ◽  
Forest Region ◽  
Quadratic Mean Diameter ◽  
Stand Density Management

A stand management density diagram (SDMD) is presented for balsam fir (Abies balsamea (L.) Mill.) forests in New Brunswick. The SDMD incorporates a maximum size density line, as well as quadratic mean diameter and top height isolines. Several mortality functions are evaluated. The resultant SDMD should be a useful tool for projecting early stand development and determining the timing and intensity of thinnings. Key words: Acadian Forest Region, mortality curves

Changes in landscape composition and stand structure from 1945–2002 on an industrial forest in New Brunswick, Canada

2005 ◽  
Vol 35 (8) ◽  
pp. 1965-1977 ◽  
Author(s):  
David A Etheridge ◽  
David A MacLean ◽  
Robert G Wagner ◽  
Jeremy S Wilson
Keyword(s):  
Species Composition ◽  
New Brunswick ◽  
Stand Structure ◽  
Choristoneura Fumiferana ◽  
Abies Balsamea ◽  
Basal Area ◽  
Landscape Composition ◽  
Balsam Fir ◽  
Forest Types ◽  
Industrial Forest

Detailed 1944–1947 cruise data and maps were used to compare species composition, age-class distribution, and stand structure between 1945 and 2002, for a 190 000 ha industrial forest in New Brunswick, Canada. Softwood forest area in 1945 and 2002 was similar, at 40% and 42%, respectively, but mixed hardwood–softwood decreased from 37% to 18%, and hardwood increased from 10% to 25%. Forest management from 1945 to 2002 resulted in the forest (1) becoming younger, with 86% of the trees >70 years old in 2002 versus 44% in 1945, (2) becoming denser, with 100–300 more stems per hectare and 4–7 m2/ha more basal area in 2002, and (3) having less balsam fir (Abies balsamea (L.) Mill.) — 31%–66% in 1945 versus 4%–38% in 2002 of basal area for stands with >30% softwood. Management reduced balsam fir to lower mortality associated with spruce budworm (Choristoneura fumiferana (Clem.)) outbreaks. The area of old (≥70 years old, with ≥10 trees/ha ≥30 cm DBH) and large (≥70 years old, with ≥5 trees/ha ≥45 cm DBH) spruce-fir and mixedwood wildlife habitats decreased from 112 600 and 55 200 ha in 1945 to 8200 and 7200 in 2002, respectively, while hardwood habitat increased from 22 800 to 71 500 ha. Management increased timber production while maintaining similar softwood species composition, but altered age structure and areas of mixedwood and hardwood forest types.

Temporal changes in species composition of mixedwood stands in northwest New Brunswick: 1946–2008

2010 ◽  
Vol 40 (1) ◽  
pp. 1-12 ◽  
Author(s):  
Luke J. Amos-Binks ◽  
David A. MacLean ◽  
Jeremy S. Wilson ◽  
Robert G. Wagner
Keyword(s):  
Species Composition ◽  
New Brunswick ◽  
Choristoneura Fumiferana ◽  
Abies Balsamea ◽  
Canopy Cover ◽  
Balsam Fir ◽  
Aerial Photographs ◽  
Development Patterns ◽  
Declining Species ◽  
Stand Conditions

Patterns of softwood (SW) – hardwood (HW) change from 1946 to 2006 in 32 unharvested mixedwood (MW) stands in northern New Brunswick were analyzed using aerial photographs (1946, 1966, 1982, and 2006), sampled, and related to disturbance and stand conditions. Five stand development patterns were identified based on 1946 SW content (70%–80%, termed SW versus 30%–60%, termed MW) and change in SW content from 1946 to 2006 (SW-stable, SW-declining, MW-fluctuating, MW-stable, or MW-declining). Species composition was surprisingly changeable over this 60-year period, with change in SW content varying from +18% to –62%. High canopy cover reduction from 1946 to 1966 resulted from balsam fir ( Abies balsamea (L.) Mill.) mortality due to old age and a 1950s spruce budworm ( Choristoneura fumiferana Clem.) outbreak plus birch ( Betula sp.) dieback. SW-stable stands that maintained SW composition from 1946 to 2006 (+7%) had more red spruce ( Picea rubens Sarg.) than all other classes in which SW declined by 15%–47%. SW-declining stands were located on southerly aspects (189°) and had higher mean elevations (423 m) than other classes. Results suggest that balsam fir – tolerant HW MW stands may be naturally transitional due to disturbance, species, and stand conditions, which has significant implications for forest management designed to maintain static proportions of MW and SW stands.

scholarly journals Impact of a spruce budworm outbreak in balsam fir and subsequent stand development over a 40-year period

2008 ◽  
Vol 84 (1) ◽  
pp. 60-69 ◽  
Author(s):  
David A MacLean ◽  
Allison R Andersen
Keyword(s):  
Stand Structure ◽  
Abies Balsamea ◽  
Basal Area ◽  
Stand Density ◽  
Spruce Budworm ◽  
Balsam Fir ◽  
Stand Development ◽  
Wide Range ◽  
Break Up ◽  
The Impact

Nine 0.04-ha plots were established in 1956 (age 35 years) in a balsam fir (Abies balsamea [L.] Mill.) stand in northwestern New Brunswick, Canada to determine the impact of an uncontrolled spruce budworm (Choristoneura fumiferana [Clem.]) outbreak on stand development. The plots were measured annually from 1956 to 1961 and at five-year intervals from 1965 to 1995. Moderate to severe defoliation occurred from 1951 to 1957 and again in 1975 to 1977, 1981, and 1986 to 1988. Budworm-caused mortality from 1956 to 1961 (age 35 to 40 years) varied considerably among plots, reducing volume by 35 to 113 m3/ha (34%-84%), and resulting in a wide range of post-outbreak plot densities. Plots were grouped into three post-budworm outbreak (1965, age 45 years) basal area classes, of ≤ 20 m2/ha, 21 to 27 m2/ha, and ≥ 28 m2/ha, to examine stand recovery. Recovery of volume up to age 60 years ranged from 72 to 132 m3/ha, in the lowest to highest basal area classes, respectively. From age 60 to 75 years, five plots declined in volume due to the onset of stand break-up and four plots increased in volume. By age 60 years, survivor growth was greatest in the high basal area plots, ranging from 6.2 to 9.0 m3/ha/yr in seven plots, versus 2.6 to 3.2 m3/ha/yr in two low basal area plots. From age 60 to 75 years, survivor growth averaged only 2.8 to 5.2 m3/ha/yr, and the stand exhibited major decline, with 63%, 74%, and 78% mortality of fir ≤ 15 cm DBH in the low to high basal area plots, respectively. Budworm-caused "thinning" in the 1950s largely determined subsequent stand development and the rate of stand break-up 25 to 35 years later. The timing and rate of natural stand decline was strongly influenced by post-outbreak stand density. Key words: budworm-caused mortality, stand structure, stand development, growth, mortality, stand density

AN ANALYSIS OF MEASURES OF DENSITY IN EVEN-AGED BALSAM FIR AND JACK PINE STANDS

1964 ◽  
Vol 40 (4) ◽  
pp. 474-481 ◽  
Author(s):  
P. E. Vezina
Keyword(s):  
Pinus Banksiana ◽  
Abies Balsamea ◽  
Basal Area ◽  
Stand Density ◽  
Jack Pine ◽  
Balsam Fir ◽  
Aerial Photographs ◽  
Growing Stock ◽  
The One ◽  
Crown Closure

The concept of stand density in relation to thinning is examined and its development over the years is discussed. Present difficulties of objectively measuring stand density are recognized and probable future trends towards the development of better formulae to express stand density are outlined. Researchers should continue to collect information on interrelationships among stand variables. Certain merits accrue from description of stand density in terms of variables, such as crown closure, that can be measured with some precision from aerial photographs. Conversely, valid estimates of crown closure which are often difficult to obtain by means of devices from the ground, could be predicted from stand density. Three stand variables, used as expressions of stand density, were tested in crown closure simple regressions in even-aged, unmanaged stands of balsam fir (Abies balsamea (L.) Mill.) and jack pine (Pinus banksiana Lamb.). These are: total number of trees, number of trees 4 inches and up, and basal area per acre. The strongest relationship found was the one where crown closure is compared with basal area; it was stronger for jack pine than for balsam fir. This was explained by differences in tolerance among the two species. The significance of these relationships for the stand development, and the feasibility of using height-and diameter-based indices as measures of growing stock in studies of yield are discussed.

Influence of plant-hardiness zone, shoot length, and crown class on the incidence of gouting by the balsam woolly adelgid on balsam fir

2010 ◽  
Vol 142 (5) ◽  
pp. 466-472
Author(s):  
Bertrand Guillet ◽  
Andrew Morrison ◽  
Drew Carleton ◽  
Don Ostaff ◽  
Dan Quiring
Keyword(s):  
Growth Rate ◽  
New Brunswick ◽  
Abies Balsamea ◽  
Shoot Length ◽  
Balsam Fir ◽  
Parabolic Relationship ◽  
Balsam Woolly Adelgid ◽  
Shoot Size ◽  
The Mean ◽  
Plant Hardiness

AbstractWe collected midcrown branches of balsam fir, Abies balsamea (L.) Mill. (Pinaceae), at six different sites located in five different plant-hardiness zones, along a north–south transect in New Brunswick, Canada, to evaluate the effect of plant-hardiness zone, crown class (overstory versus understory), and shoot length during the previous 10 years on the annual incidence of gouting by the balsam woolly adelgid, Adelges piceae (Ratzeburg) (Homoptera: Adelgidae). Site, crown class, and their interaction, along with the square of shoot length, explained 78% of the variation in gouting. Variations in gouting attributed to plant-hardiness zone were probably primarily due to variation in mean January temperature: at each site, the mean January temperature was positively and closely related to the mean level of gouting. The level of gouting was consistently higher on trees in the understory than on those in the overstory. Shoot length was parabolically related to the proportion of shoots with gout. The parabolic relationship between shoot size and the level of gouting is similar to that previously reported for galling adelgids, and suggests that gouting by A. piceae may be greatest on trees with an intermediate growth rate.

Changes in root morphology after precommercial thinning in balsam fir stands

2003 ◽  
Vol 33 (12) ◽  
pp. 2452-2459 ◽  
Author(s):  
Jean-Claude Ruel ◽  
Catherine Larouche ◽  
Alexis Achim
Keyword(s):  
Radial Growth ◽  
Abies Balsamea ◽  
Stand Density ◽  
Balsam Fir ◽  
Cross Sectional ◽  
Beam Shape ◽  
Precommercial Thinning ◽  
Beneficial Effects ◽  
Density Control ◽  
Over Time

Precommercial thinning is often used to control stand density in naturally regenerated balsam fir (Abies balsamea (L.) Mill.) stands. Early stand density control could have beneficial effects on longer term stand stability through a modification of stem shape and root development. To assess the effect of precommercial thinning, two thinned and two unthinned stands were selected. Root sections were collected at 25 cm from the centre of the stem for all major roots (diameter greater than 2 cm). A disk was also cut at breast height level. From these disks, response in radial growth was determined. Detailed root measurements were taken on the sample disks to assess treatment effect on the following variables: asymmetry in root cross-sectional area (CSA) distribution, individual root shape, as well as changes in root shape over time. A quick and pronounced response in root growth occurred. This response was greater than that observed in the trunk. No asymmetry in root CSA distribution was observed at the stand level. Trees allocated more to radial growth above the biological centre of the root both in treated and control stands, but this trend was increased by thinning. Roots also tended to develop T-beam shapes over time, both in control and thinned stands. Most roots initially did not possess an I-beam shape and did not develop one during the course of the study. According to our results, trees respond quickly to the new growing conditions created by thinning by increasing biomass allocation to parts of the roots where mechanical stresses are greater.

A study of fungal endophytes of needles of balsam fir (Abies balsamea) and red spruce (Picea rubens) in New Brunswick, Canada, using culture and electron microscope techniques

1989 ◽  
Vol 67 (12) ◽  
pp. 3513-3516 ◽  
Author(s):  
John A. Johnson ◽  
Norman J. Whitney
Keyword(s):  
New Brunswick ◽  
Fungal Endophytes ◽  
Abies Balsamea ◽  
Picea Rubens ◽  
Red Spruce ◽  
Balsam Fir ◽  
Intercellular Spaces ◽  
Parenchyma Cells ◽  
Spruce Needles ◽  
Petiole Segment

Endophytic fungi were isolated from the interiors of surface-sterilized needles of balsam fir (Abies balsamea) and red spruce (Picea rubens) in New Brunswick, Canada. Four different fungi were isolated frequently. One species, designated X-W, was isolated exlusively from the petiole segment of red spruce needles. There was no difference in the variety of species isolated from fir needles from two sites, but a difference in frequency of species did exist. Micrographs of the interior of balsam fir needles showed hyphae occupying intercellular spaces and adhering to the outer walls of parenchyma cells. No penetration of cells by either fungus was observed.

Windthrow and growth response following a spruce budworm inspired, variable retention harvest in New Brunswick, Canada

2015 ◽  
Vol 45 (6) ◽  
pp. 659-666 ◽  
Author(s):  
Edward A. Wilson ◽  
David A. MacLean
Keyword(s):  
New Brunswick ◽  
Growth Response ◽  
Choristoneura Fumiferana ◽  
Abies Balsamea ◽  
Natural Disturbance ◽  
Spruce Budworm ◽  
Balsam Fir ◽  
Growth Release ◽  
Variable Retention ◽  
Variable Retention Harvest

Forest management regimes increasingly focus on the emulation of natural disturbance events, e.g., fire or insect outbreaks, to help increase ecosystem sustainability. We determined the residual stand response to a variable retention harvest inspired by spruce budworm (Choristoneura fumiferana (Clemens)) outbreaks in New Brunswick, Canada. Our objectives were to analyze the differences between surviving residual trees and those that succumbed to windthrow and to quantify growth release. The treatment was based on harvesting the estimated spruce budworm outbreak mortality, i.e., 90% of mature balsam fir (Abies balsamea (L.) Mill., 60% of mature spruce (Picea spp.), and no hardwoods. Windthrow increased with the proportion of trees harvested and averaged 52% over 7–9 years in these stands with high balsam fir – spruce content. One-third of 42 harvested plots sustained >30% windthrow, whereas 73% of 11 similar unharvested plots had <10% windthrow. Balsam fir had higher windthrow than spruce at 53% and 41%, respectively. Windthrown balsam fir trees had significantly larger diameters at breast height (DBH, 1.3 m), larger heights, and smaller crown ratios than surviving residual trees. Substantial growth release occurred, with DBH increment of residual trees 48%–64% greater than trees in unharvested plots. Balsam fir and intolerant hardwoods exhibited the largest growth response. We suggest that future spruce budworm inspired harvests in stands with high balsam fir – spruce content use two or three entries about 5 years apart to reduce windthrow.

scholarly journals Étude rétrospective de l'accroissement en diamètre du sapin baumier (Abies balsamea (L.) Mill.) et de l'épinette rouge (Picea rubens Sarg.) en peuplements mixtes après une coupe a diamètre limite

2005 ◽  
Vol 81 (6) ◽  
pp. 791-800 ◽  
Author(s):  
Mathieu Fortin
Keyword(s):  
Mixed Model ◽  
Abies Balsamea ◽  
Time Lapse ◽  
Picea Rubens ◽  
Red Spruce ◽  
Balsam Fir ◽  
Diameter Growth ◽  
Significant Variable ◽  
Mixed Stands ◽  
Harvesting Time

Diameter growth at breast height of 341 balsam fir and red spruce stems has been reproduced over a time lapse of 50 years following a diameter limit cutting. The available information has been analyzed with a statistical model in which the effects of time, species (two levels), ecological type (three levels) and diameter at harvesting have been tested. Results indicate that balsam fir saplings have higher diameter growths than red spruce saplings, but only in the case of better ecological types. The differences between both species are smaller for stems having a merchantable diameter (dbh > 9.0 cm) at harvesting time. On poor ecological station, red spruce diameter growth is more important than for balsam fir and this, whatever the diameter at harvesting time. On the other hand, as indicated by this analysis, stem diameter at the time of silvicultural treatment constitutes a significant variable in the prediction of diameter growth for red spruce stems, while the effect of this variable is less identifiable for balsam fir. Even if significant, the growth differences between the two species are small. The competition created by the balsam fir regeneration on red spruce saplings is definitely not the cause of the depletion of red spruce in second growth stands.. Key words: red spruce (Picea rubens Sarg.), balsam fir (Abies balsamea (L.) Mill.), diameter growth, partial cut, mixed stands, linear model, mixed model

Sign in / Sign up

Export Citation Format

Share Document