scholarly journals Effects of precommercial thinning on the forest value chain in northwestern New Brunswick: Part 5 – Kraft and Thermomechanical pulping and pulp quality

2013 ◽  
Vol 89 (04) ◽  
pp. 490-501 ◽  
Author(s):  
Paul Bicho ◽  
Elmer Portillo ◽  
Bernard Yuen ◽  
Dongbo Yan ◽  
Doug G. Pitt
Keyword(s):  
Value Chain ◽  
Abies Balsamea ◽  
Wood Chip ◽  
Economic Benefits ◽  
Kraft Pulping ◽  
Wood Chips ◽  
Precommercial Thinning ◽  
Silvicultural Treatments ◽  
Thermomechanical Pulping ◽  
Main Effects

Forty-eight years after application, three nominal precommercial thinning (PCT) spacings of 4 ft (1.2 m), 6 ft (1.8 m) and 8 ft (2.4 m) were compared to an unthinned control in six replicate, balsam fir (Abies balsamea [L.] Mill.)-dominated stands. Following the clearcut harvest of three of these replicates in 2008, chips produced from sawmilling trials (slab-wood) and from the top logs of the sampled trees (top-log) were kraft and thermomechanically (TMP) pulped. In general, top-log chips took longer to kraft pulp, had lower yields, and produced pulps with shorter, finer fibres than the corresponding slab-wood chips, across all PCT treatment levels. The main effects of PCT on pulping occurred with slab-wood chips and not top-log chips. While end-product quality in either kraft or TMP production was generally unaffected by wood from the range of thinnings tested, slight reductions in slab-wood chip density and H-factor suggest that kraft pulping productivity may be reduced by 1.8% with furnish from thinned stands. While these losses could be offset somewhat by lower chip consumption, the economic benefits for a kraft mill are marginal at best, and sharing of fiscal gains across the fibre value chain needs to be explored. Specific refining energy required in TMP production was, however, reduced by 4% with furnish from thinned stands. These results suggest that value-chain optimization is ultimately dependent on the segregation of fibre from different sources, including within-tree and among silvicultural treatments and sites.

scholarly journals Effects of precommercial thinning on the forest value chain in northwestern New Brunswick: Part 6 – Estimating the economic benefits

2013 ◽  
Vol 89 (04) ◽  
pp. 502-511 ◽  
Author(s):  
Doug Pitt ◽  
Len Lanteigne ◽  
Michael K. Hoepting ◽  
Jean Plamondon ◽  
Isabelle Duchesne ◽  
...  
Keyword(s):  
Value Chain ◽  
Net Present Value ◽  
Abies Balsamea ◽  
Economic Benefits ◽  
Sensitivity Analyses ◽  
Deciduous Tree ◽  
Green River ◽  
Precommercial Thinning ◽  
Wood Processing ◽  
Silvicultural Treatments

The Green River precommercial thinning (PCT) trials were established between 1959 and 1961 in naturally regenerating balsam fir (Abies balsamea [L.] Mill.)-dominated stands an average of eight years after overstory removal. Following clearcut harvest of three of the study's six replicates in the fall of 2008, the rotation-length effects of PCT and vegetation management (VM; deciduous tree and brush suppression) on the forest value chain were integrated into a spreadsheet-based model that estimates the net present value (NPV) of these silvicultural treatments. Assuming costs and prices near recent values, both PCT and VM were observed to support positive landowner NPVs through discount rates in excess of 6%. At a discount rate of 4% and an age where sawlog production was maximized, PCT and VM offered similar NPV (>$550/ha). Landowners that can attract buyers willing to pay a premium for wood from thinned stands (equal to the sum of reduced operational overhead charges, harvesting and sawmilling costs and increased pulping costs) could see the value of their stands double. Sensitivity analyses revealed that these results are dependent on site productivity, silvicultural costs and a strong premium on sawlog stumpage rates. Depending on economic circumstances, PCT and VM could be attractive investments on high quality sites that are situated in close proximity to wood processing infrastructure.

Effects of precommercial thinning on the forest value chain in northwestern New Brunswick: Part 4 – Lumber production, quality and value

2013 ◽  
Vol 89 (04) ◽  
pp. 474-489 ◽  
Author(s):  
Isabelle Duchesne ◽  
Doug G. Pitt ◽  
Francis Tanguay
Keyword(s):  
Value Chain ◽  
Positive Impact ◽  
Abies Balsamea ◽  
Basic Density ◽  
Production Quality ◽  
Balsam Fir ◽  
Appreciable Effect ◽  
Precommercial Thinning ◽  
Product Value ◽  
Negative Effect

Forty-eight years after application, three nominal precommercial thinning (PCT) spacings of 4 ft (1.2 m), 6 ft (1.8 m) and 8 ft (2.4 m) were compared to an unthinned control in six replicate, balsam fir (Abies balsamea [L.] Mill.)-dominated stands. Within three of these replicates chosen for clearcut harvest in 2008, a total of 150 trees were bucked into 479 sawlogs that produced 10 829 board feet of lumber. PCT had a positive impact on Premium lumber grade recovery per tree, increasing it from an average of 9 foot board measure (fbm) in the unthinned control plots, to 22 fbm in plots nominally spaced to 8 ft (p = 0.02). No. 2 & Better grade yields increased from 42 to 76 fbm/tree in these same sets of plots (p < 0.01). PCT to 6 ft and 8 ft increased the production of 2×4 and 2×6 lumber over the control (p ≤ 0.04). Stand-level gross total product value increased between 11% and 23% in thinned stands (estimated at +$3000 to +$6600 per ha, p < 0.01). PCT had no appreciable effect on sawn lumber wood density (p ≥ 0.26) or lumber stiffness (MOE; ≤-6.2%, p ≥ 0.11), but had a negative effect on lumber strength (MOR; ≤ -13.4%, p ≤ 0.03) and wood basic density at stump height (≤- 7%; p < 0.01). MDF panel properties were generally good, regardless of spacing. We recommend thinning young balsam fir stands to a maximum nominal spacing of 6 ft (1.2 m) to maintain satisfactory lumber mechanical properties and maximize product value per hectare.

Effects of precommercial thinning on the forest value chain in northwestern New Brunswick: Part 1 – Roundwood production and stumpage value

2013 ◽  
Vol 89 (04) ◽  
pp. 446-457 ◽  
Author(s):  
Doug G. Pitt ◽  
Len Lanteigne ◽  
Michael K. Hoepting ◽  
Jean Plamondon
Keyword(s):  
Value Chain ◽  
Abies Balsamea ◽  
Stand Age ◽  
Annual Increment ◽  
Data Set ◽  
Individual Tree ◽  
Green River ◽  
Precommercial Thinning ◽  
Permanent Sample Plots ◽  
Sequential Evaluation

The Green River precommercial thinning trials were established between 1959 and 1961 in naturally regenerating balsam fir (Abies balsamea [L.] Mill.)-dominated stands, an average of eight years after overstory removal. Three nominal spacings of 4 ft (1.2 m), 6 ft (1.8 m) and 8 ft (2.4 m) were compared to an unthinned control in six replicate blocks. In the fall of 2008, following completion of the ninth sequential evaluation of the study’s 48 permanent sample plots, three of the six replicates were clearcut harvested and data were collected on roundwood product recovery and value. These data were used to construct treatment-invariant (p ≥ 0.18) functions predicting product volume from tree diameter, allowing the volume of studwood, sawlogs and pulpwood to be predicted for the full Green River data set (all 6 replicates) through time. Mean annual increment of gross merchantable volume culminated in all treatments around stand age 45. Thinning to a nominal spacing of 6 ft, resulting in 1600 merchantable stems per ha by stand age 30, offered the best balance of individual tree and stand growth, producing 20% more gross merchantable volume and 26% more sawlog volume than unthinned stands, potentially increasing landowner stumpage revenues by 22% (p < 0.01). The sawlog volume produced in unthinned stands could be realized up to 15 years sooner in thinned stands, suggesting that PCT may offer substantive flexibility in balancing forest-level wood supply objectives.

Effects of precommercial thinning on the forest value chain in northwestern New Brunswick: Part 2 – Efficiency gains in cut-to-length harvesting

2013 ◽  
Vol 89 (04) ◽  
pp. 458-463 ◽  
Author(s):  
Jean Plamondon ◽  
Doug G. Pitt
Keyword(s):  
Value Chain ◽  
Abies Balsamea ◽  
Green River ◽  
Precommercial Thinning ◽  
Permanent Sample Plots ◽  
Thinning Intensity ◽  
System Data ◽  
Sequential Evaluation ◽  
Harvesting Costs ◽  
Different Levels

The Green River precommercial thinning trials were established between 1959 and 1961 in naturally regenerating balsam fir (Abies balsamea [L.] Mill.)-dominated stands an average of eight years after overstory removal. Three nominal spacings of 4 ft (1.2 m), 6 ft (1.8 m) and 8 ft (2.4 m) were compared to an unthinned control in six replicate blocks. In the fall of 2008, following completion of the ninth sequential evaluation of the study’s 48 permanent sample plots, three of the six replicates were clearcut harvested using a cut-to-length system; data were collected on harvesting, forwarding and loading efficiency. Largely due to increased average tree size, precommercially thinned stands were associated with improvements in both harvesting and forwarding productivity, proportional to thinning intensity. For example, the nominal 6-ft spacing yielded 30% to 35% gains in harvesting productivity, and 16% to 39% gains in forwarding productivity (p ≤ 0.04), these ranges spanning the different levels of operator expertise and block conditions observed. In total, estimated harvesting costs were $12.58/m3 in the unthinned stands, compared to $9.10/m3 in the 6-ft spaced stands (p = 0.02). Such a difference represents a $3.48/m3 savings, which translates into just over $1000 per ha, based on the gross merchantable volume produced in the 6-ft spaced stands.

scholarly journals Effect of mechanical and chemical pulping on ionic liquid fractionation of wood chips

2019 ◽  
Author(s):  
◽  
Nhlanhla Hlongwa
Keyword(s):  
Ionic Liquid ◽  
Kraft Pulp ◽  
Thermo Gravimetric Analysis ◽  
Wood Chip ◽  
Kraft Pulping ◽  
Wood Chips ◽  
Regenerated Cellulose ◽  
Gravimetric Analysis ◽  
Mechanical Pulp ◽  
G Ratio

In this study, a comparison of two pulping methods namely mechanical and chemical, on the dissolution of Eucalyptus grandis (E. grandis) wood chips was undertaken. The wood chip pulp was treated with an ionic liquid (IL): 1-allyl-3-methylimidazolium chloride to extract the cellulose. The IL was mixed with unbleached mechanical pulp (UBMP), bleached mechanical pulp (BMP), unbleached kraft pulp (UBKP) and bleached kraft pulp (BKP) in ratios of 10%, 20%, 30%. Each solution contained IL, wood pulp and 2-mL of 16 v/v % of dimethyl sulfoxide (DMSO). The 30 % IL pretreatment was the most effective IL pretreatment. The cellulose yield at 30 % IL pretreatment for UBMP, BMP, UBKP and BKP was 65.12%, 63.82%, 67.43%, 67.15%, respectively. This indicated that the kraft pulping method was more effective than the mechanical pulping method for the yield of cellulose after the IL pretreatment. The Crl value at 30 % IL pretreatment was highest for UBMP (72.03%) indicating that the pretreatment used was the least effective in reducing the cellulose crystallinity. The fractions of E. grandis wood chip namely, lignin, regenerated cellulose and hemicelluloses before and after the IL pretreatment, were characterized by a variety of analytical techniques such as High-Performance Liquid Chromatography (HPLC) (carbohydrates), Fourier Transform Infra-Red Attenuated Total Reflection (FTIR-ATR) (functional groups), Pyrolysis-Gas Chromatography /Mass Spectroscopy (Py-GC/MS) (lignin fractions), Ultraviolet/Visible spectroscopy (UV/Vis) (acid soluble lignin), Thermo Gravimetric Analysis (TGA) (degradation of pulp), X-Ray Diffraction (XRD) (crystallinity) and high resolution Scanning Electron Microscopy (SEM) (morphology). Kraft pulping was the most effective method for the yield of cellulose after the [AMIM][Cl]/DMSO pretreatment. The 30% [AMIM][Cl]/DMSO pretreatment gave the highest S/G ratio indicating that minimal bleaching was required.

Effects of precommercial thinning on the forest value chain in northwestern New Brunswick: Part 3 – Incidence of root and butt decay

2013 ◽  
Vol 89 (04) ◽  
pp. 464-473 ◽  
Author(s):  
Gary Warren ◽  
Patricia Baines ◽  
Jean Plamondon ◽  
Doug G. Pitt
Keyword(s):  
Forest Management ◽  
Value Chain ◽  
Abies Balsamea ◽  
Balsam Fir ◽  
Stand Age ◽  
Stem Form ◽  
Green River ◽  
Precommercial Thinning ◽  
Permanent Sample Plots ◽  
Butt Rot

The Green River precommercial thinning (PCT) trials were established between 1959 and 1961 in naturally regenerating balsam fir (Abies balsamea [L.] Mill.)-dominated stands an average of eight years after overstory removal. Three nominal spacings of 4 ft (1.2 m), 6 ft (1.8 m) and 8 ft (2.4 m) were compared to an unthinned control in six replicate blocks. In the fall of 2008, following completion of the ninth sequential evaluation of the study’s 48 permanent sample plots, three of the six replicates were clearcut harvested; butt rot data were collected immediately afterwards. To date, forest management research and goals have focused on the benefits of PCT, such as increased tree size and merchantable volume, shorter rotation ages, and better stem form and uniformity. Comparatively little attention has been placed on negative aspects of PCT, such as the incidence and development of root and butt rots, and their impact on fibre yields and wood product values. Results from the Green River study provide evidence that PCT may increase the incidence of butt rot in balsam fir, with incidence proportional to thinning intensity (p < 0.01). We also observed incidence and volume of butt rot to increase with stem diameter (p ≤ 0.05). The experiment suggests that factors such as stand age at time of thinning, and age at the time of harvest are important considerations when it comes to mitigating the impacts of butt rot through forest management.

Effects of precommercial thinning on the forest value chain in northwestern New Brunswick: A fifty-year legacy of forest research continues

2013 ◽  
Vol 89 (04) ◽  
pp. 439-445 ◽  
Author(s):  
Doug G. Pitt ◽  
Len Lanteigne ◽  
Michael K. Hoepting ◽  
James Farrell
Keyword(s):  
Value Chain ◽  
Stand Structure ◽  
Abies Balsamea ◽  
Stem Density ◽  
Tree Species Composition ◽  
Green River ◽  
Precommercial Thinning ◽  
Permanent Sample Plots ◽  
Commercial Thinning ◽  
Fibre Yield

Reduction of the stem density of young, naturally regenerating stands through precommercial thinning (PCT) is widely accepted as beneficial for controlling tree species composition, selecting crop trees and improving their growth, and preparing stand structure for subsequent commercial thinning. Less understood and accepted are the forest-level benefits associated with wood fibre yield and value as they relate to the financial returns of PCT. The Green River PCT trials were established between 1959 and 1961 in naturally regenerating balsam fir (Abies balsamea [L.] Mill.)-dominated stands an average of eight years after overstory removal. Three nominal spacings of 4 ft (1.2 m), 6 ft (1.8 m) and 8 ft (2.4 m) were compared to an unthinned control in six replicate blocks. In the fall of 2008, following completion of the ninth sequential evaluation of the study’s 48 permanent sample plots, three of the six replicates were clearcut harvested and data were collected to quantify the effects of PCT on the forest value chain. This paper is the introduction to a series of six papers that quantify the rotation-length effects of PCT on: 1) stand dynamics and the yield of roundwood products; 2) harvesting and wood handling costs; 3) root and butt rot incidence, severity, and effects on volume recovery; 4) lumber and fibre-based panel recovery and value; 5) pulp and paper recovery and value; and 6) the overall integration of these costs and benefits.

A review on the prerequisites of Evidence-Based Curriculum as a driver to skills development of the leather value chain in Africa

2019 ◽  
Vol 5 (1) ◽  
pp. 1-10
Author(s):  
Mwinyikione Mwinyihija
Keyword(s):  
Higher Education ◽  
Curriculum Design ◽  
Value Chain ◽  
Theoretical Perspective ◽  
Economic Benefits ◽  
Skills Development ◽  
Evidence Based ◽  
Wealth Creation ◽  
Urban Rural ◽  
Review Study

The review study closely introspects’ on the prerequisites of evidence-based curriculum within the realms of specialized skills development agenda as pursued through higher education Institutions in Africa. Explicitly, the constraining factors that bedevil the leather sector are identifiable when appropriate research designs tools are applied. As such, in the process of identifying the constraints, renascence themes could, therefore, be beneficial in collecting evidence in support of developing curriculum. Such a developed curriculum stands higher chances of acceptability and aptly mitigates against challenges related to specialized skills development. The review succinctly indicates that in the process of identifying the themes, the scope of collecting evidence becomes attainable, thus, improving curricula that entails a participatory and transformative orientation. Indeed, during the review phase of the study, three main perspectives are depicted to be consequential in attaining a comprehensive, evidence-based curriculum, such as; action research, backward curriculum design perspective and theoretical perspective. Therefore, about this perspective, a reflection based on personal experiences and related to new knowledge with what they already know leads to constructivism. The relevancy of a constructivist strategy is observed to facilitate the observatory and evaluative stance during the development of evidence-based curriculum. Moreover, in consolidating and sustaining the benefit of such a developed curriculum, threshold concept was found during the review that it complements the process and strengthens the collecting evidence for curriculum development. Accordingly, therefore, the result of the review study indicate that Africa would  position itself for initiating transformational changes in aspects of specialized higher education, fruition towards socio-economic benefits (e.g. employment, wealth creation and technology transfer), reversal of urban-rural or inter/intra continental migration flurry.

scholarly journals Wood Chip Drying through the Using of a Mobile Rotary Dryer

Energies ◽  
2019 ◽  
Vol 12 (9) ◽  
pp. 1590 ◽  
Author(s):  
Angelo Del Giudice ◽  
Andrea Acampora ◽  
Enrico Santangelo ◽  
Luigi Pari ◽  
Simone Bergonzoli ◽  
...  
Keyword(s):  
Moisture Content ◽  
Power Plants ◽  
Black Locust ◽  
Thermal Power ◽  
Initial Moisture Content ◽  
Wood Chip ◽  
Wood Chips ◽  
Cocurrent Flow ◽  
Drying Process ◽  
Rotary Dryer

Drying is a critical point for the exploitation of biomass for energy production. High moisture content negatively affects the efficiency of power generation in combustion and gasification systems. Different types of dryers are available however; it is known that rotary dryers have low cost of maintenance and consume 15% and 30% less in terms of specific energy. The study analyzed the drying process of woody residues using a new prototype of mobile rotary dryer cocurrent flow. Woodchip of poplar (Populus spp.), black locust (Robinia pseudoacacia L.), and grapevine (Vitis vinifera L.) pruning were dried in a rotary drier. The drying cycle lasted 8 h for poplar, 6 h for black locust, and 6 h for pruning of grapevine. The initial biomass had a moisture content of around 50% for the poplar and around 30% for grapevine and black locust. The study showed that some characteristics of the biomass (e.g., initial moisture content, particle size distribution, bulk density) influence the technical parameters (i.e., airflow temperature, rate, and speed) of the drying process and, hence, the energy demand. At the end of the drying process, 17% of water was removed for poplar wood chips and 31% for grapevine and black locust wood chips. To achieve this, result the three-biomass required 1.61 (poplar), 0.86 (grapevine), and 1.12 MJ kgdry solids−1 (black locust), with an efficiency of thermal drying (η) respectively of 37%, 12%, and 27%. In the future, the results obtained suggest an increase in the efficiency of the thermal insulation of the mobile dryer, and the application of the mobile dryer in a small farm, for the recovery of exhaust gases from thermal power plants.

scholarly journals Improvement of Enzymatic Saccharification of Cellulose-Containing Raw Materials Using Aspergillus niger

Processes ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 1360
Author(s):  
Ekaterina Budenkova ◽  
Stanislav Sukhikh ◽  
Svetlana Ivanova ◽  
Olga Babich ◽  
Vyacheslav Dolganyuk ◽  
...  
Keyword(s):  
Enzymatic Hydrolysis ◽  
Aspergillus Niger ◽  
Filter Paper ◽  
Raw Materials ◽  
Enzymatic Saccharification ◽  
Wood Chip ◽  
Cellulase Activity ◽  
Wood Chips ◽  
Acid Pretreatment ◽  
Hydrolysis Of

Enzymatic hydrolysis of cellulose-containing raw materials, using Aspergillus niger, were studied. Filter paper, secondary cellulose-containing or starch-containing raw materials, miscanthus cellulose after alkaline or acid pretreatment, and wood chip cellulose, were used as substrates. The study focused on a wild A. niger strain, treated, or not (control), by ultraviolet (UV) irradiations for 45, 60, or 120 min (UV45, UV60, or UV120), or by UV irradiation for 120 min followed by a chemical treatment with NaN3 + ItBr for 30 min or 80 min (UV120 + CH30 or UV120 + CH80). A mixture of all the A. niger strains (MIX) was also tested. A citrate buffer, at 50 mM, wasthe most suitable for enzymatic hydrolysis. As the UV exposure time increased to 2 h, the cellulase activity of the surviving culturewas increased (r = 0.706; p < 0.05). The enzymatic activities of the obtained strains, towards miscanthus cellulose, wood chips, and filter paper, were inferior to those obtained with commercial enzymes (8.6 versus 9.1 IU), in some cases. Under stationary hydrolysis at 37 °C, pH = 4.7, the enzymatic activity of A. niger UV120 + CH30 was 24.9 IU. The enzymatic hydrolysis of secondary raw materials, using treated A. niger strains, was themost effective at 37 °C. Similarly, the most effective treatment of miscanthus cellulose and wood chips occurred at 50 °C. The maximum conversion of cellulose to glucose was observed using miscanthus cellulose (with alkaline pretreatment), and the minimum conversion was observed when using wood chips. The greatest value of cellulase activity was evidenced in the starch-containing raw materials, indicating that A. niger can ferment not only through cellulase activity, but also via an amylolytic one.

Sign in / Sign up

Export Citation Format

Share Document