scholarly journals K-Means Clustering in WSN with Koheneon SOM and Conscience Function

2019 ◽  
Vol 13 (8) ◽  
pp. 63
Author(s):  
Asia K. Bataineh ◽  
Mohammad Habib Samkari ◽  
Abdualla Abdualla ◽  
Saad Al-Azzam
Keyword(s):  
Neural Networks ◽  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Clustering Algorithm ◽  
Dynamic Environments ◽  
Wireless Sensor ◽  
Average Lifetime ◽  
Self Organizing Map ◽  
Over Time

Wireless Sensor Networks (WSNs) are broadly utilized in the recent years to monitor dynamic environments which vary in a rapid way over time. The most used technique is the clustering one, such as Kohenon Self Organizing Map (KSOM) and K means. This paper introduces a hybrid clustering technique that represents the use of K means clustering algorithm with the KSOM with conscience function of Neural Networks and applies it on a certain WSN in order to measure and evaluate its performance in terms of both energy and lifetime criteria. The application of this algorithm in a WSN is performed using the MATLAB software program. Results demonstrate that the application of K-means clustering algorithm with KSOM algorithm enhanced the performance of the WSN which depends on using KSOM algorithm only in which it offers an enhancement of 11.11% and 3.33% in terms of network average lifetime and consumed energy, respectively. The comparison among the current work and a previous one demonstrated the effectiveness of the proposed approach in this work in terms of reducing the energy consumption.

scholarly journals Marine Observation Beacon Clustering and Recycling Technology Based on Wireless Sensor Networks

Sensors ◽  
2019 ◽  
Vol 19 (17) ◽  
pp. 3726 ◽  
Author(s):  
Zhang ◽  
Qi ◽  
Li
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Clustering Algorithm ◽  
Minimum Weight ◽  
Recovery Phase ◽  
Base Station ◽  
Wireless Sensor ◽  
Fuzzy Membership Function ◽  
Dijkstra Algorithm

Monitoring of marine polluted areas is an emergency task, where efficiency and low-power consumption are challenging for the recovery of marine monitoring equipment. Wireless sensor networks (WSNs) offer the potential for low-energy recovery of marine observation beacons. Reducing and balancing network energy consumption are major problems for this solution. This paper presents an energy-saving clustering algorithm for wireless sensor networks based on k-means algorithm and fuzzy logic system (KFNS). The algorithm is divided into three phases according to the different demands of each recovery phase. In the monitoring phase, a distributed method is used to select boundary nodes to reduce network energy consumption. The cluster routing phase solves the extreme imbalance of energy of nodes for clustering. In the recovery phase, the inter-node weights are obtained based on the fuzzy membership function. The Dijkstra algorithm is used to obtain the minimum weight path from the node to the base station, and the optimal recovery order of the nodes is obtained by using depth-first search (DFS). We compare the proposed algorithm with existing representative methods. Experimental results show that the algorithm has a longer life cycle and a more efficient recovery strategy.

scholarly journals Path Optimization of Mobile Sink Node in Wireless Sensor Network Water Monitoring System

Complexity ◽  
2019 ◽  
Vol 2019 ◽  
pp. 1-10
Author(s):  
Fan Chao ◽  
Zhiqin He ◽  
Aiping Pang ◽  
Hongbo Zhou ◽  
Junjie Ge
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Ant Colony Algorithm ◽  
Clustering Algorithm ◽  
Mobile Sink ◽  
Base Station ◽  
Water Monitoring ◽  
Wireless Sensor ◽  
Sink Node

In the water area monitoring of the traditional wireless sensor networks (WSNs), the monitoring data are mostly transmitted to the base station through multihop. However, there are many problems in multihop transmission in traditional wireless sensor networks, such as energy hole, uneven energy consumption, unreliable data transmission, and so on. Based on the high maneuverability of unmanned aerial vehicles (UAVs), a mobile data collection scheme is proposed, which uses UAV as a mobile sink node in WSN water monitoring and transmits data wirelessly to collect monitoring node data efficiently and flexibly. In order to further reduce the energy consumption of UAV, the terminal nodes are grouped according to the dynamic clustering algorithm and the nodes with high residual energy in the cluster are selected as cluster head nodes. Then, according to the characteristics of sensor nodes with a certain range of wireless signal coverage, the angular bisection method is introduced on the basis of the traditional ant colony algorithm to plan the path of UAV, which further shortens the length of the mobile path. Finally, the effectiveness and correctness of the method are proved by simulation and experimental tests.

A Cluster Algorithm for Wireless Sensor Networks Based on Energy Efficiency

2015 ◽  
Vol 785 ◽  
pp. 744-750
Author(s):  
Lei Gao ◽  
Qun Chen
Keyword(s):  
Energy Efficiency ◽  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Clustering Algorithm ◽  
Cluster Head ◽  
Selection Criterion ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Head Node

In order to solve the energy limited problem of sensor nodes in the wireless sensor networks (WSN), a fast clustering algorithm based on energy efficiency for wire1ess sensor networks is presented in this paper. In the system initialization phase, the deployment region is divided into several clusters rapidly. The energy consumption ratio and degree of the node are chosen as the selection criterion for the cluster head. Re-election of the cluster head node at this time became a local trigger behavior. Because of the range of the re-election is within the cluster, which greatly reduces the complexity and computational load to re-elect the cluster head node. Theoretical analysis indicates that the timing complexity of the clustering algorithm is O(1), which shows that the algorithm overhead is small and has nothing to do with the network size n. Simulation results show that clustering algorithm based on energy efficiency can provide better load balancing of cluster heads and less protocol overhead. Clustering algorithm based on energy efficiency can reduce energy consumption and prolong the network lifetime compared with LEACH protocol.

scholarly journals Reducing Energy Consumption of the SEECH Algorithm in Wireless Sensor Networks Using a Mobile Sink and Honey Bee Colony Algorithm

2018 ◽  
Vol 10 (1) ◽  
pp. 185-200
Author(s):  
Mohammad Sedighimanesh ◽  
Ali Sedighimanesh
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Clustering Algorithm ◽  
Data Dissemination ◽  
Mobile Sink ◽  
Wireless Sensor ◽  
Bee Colony ◽  
Honeybee Colony ◽  
Reduce Energy Consumption

Purpose – Clustering, routing, and data dissemination are an important issue in wireless sensor networks. The basic functions of wireless sensor networks are phenomena controlling in the physical environment, and the reporting of sensed data to the central node called sink, in which more operations can be done on the data. The most important limitation of wireless sensor networks is energy consumption. There are several ways to increase the lifetime of these networks, that one of the most important is the using proper clustering method. The aim of this study is to reduce energy consumption using an effective clustering algorithm and for this purpose, the honeybee colony metaheuristic method was used for cluster heads selection. Methodology/approach/design – The simulation in this paper was done using MATLAB software and the proposed method is compared with the LEACH and SEED approach. Findings – The results of simulations in this research indicate that the research has significantly reduced the energy consumption in the network than LEACH and SEED algorithms. Originality/value – Given the energy constraints in the wireless sensor network, providing such solutions and using metaheuristic algorithms can dramatically reduce energy consumption and, consequently increase network lifetime.

scholarly journals A DISTRIBUTED ENERGY EFFICIENT CLUSTERING ALGORITHM FOR DATA AGGREGATION IN WIRELESS SENSOR NETWORKS

2018 ◽  
Vol 19 (1) ◽  
pp. 72-90
Author(s):  
Seyed Mohammad Bagher Musavi Shirazi ◽  
Maryam Sabet ◽  
Mohammad Reza Pajoohan
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Data Aggregation ◽  
Clustering Algorithm ◽  
Base Station ◽  
Wireless Sensor ◽  
Relay Nodes ◽  
Cluster Heads ◽  
Energy Efficient Clustering

Wireless sensor networks (WSNs) are a new generation of networks typically consisting of a large number of inexpensive nodes with wireless communications. The main purpose of these networks is to collect information from the environment for further processing. Nodes in the network have been equipped with limited battery lifetime, so energy saving is one of the major issues in WSNs. If we balance the load among cluster heads and prevent having an extra load on just a few nodes in the network, we can reach longer network lifetime. One solution to control energy consumption and balance the load among nodes is to use clustering techniques. In this paper, we propose a new distributed energy-efficient clustering algorithm for data aggregation in wireless sensor networks, called Distributed Clustering for Data Aggregation (DCDA). In our new approach, an optimal transmission tree is constructed among sensor nodes with a new greedy method. Base station (BS) is the root, cluster heads (CHs) and relay nodes are intermediate nodes, and other nodes (cluster member nodes) are the leaves of this transmission tree. DCDA balances load among CHs in intra-cluster and inter-cluster data communications using different cluster sizes. For efficient inter-cluster communications, some relay nodes will transfer data between CHs. Energy consumption, distance to the base station, and cluster heads’ centric metric are three main adjustment parameters for the cluster heads election. Simulation results show that the proposed protocol leads to the reduction of individual sensor nodes’ energy consumption and prolongs network lifetime, in comparison with other known methods. ABSTRAK: Rangkaian sensor wayarles (WSN) adalah rangkaian generasi baru yang terdiri daripada nod-nod murah komunikasi wayarles. Tujuan rangkaian-rangkaian ini adalah bagi mengumpul maklumat sekeliling untuk proses seterusnya. Nod dalam rangkaian ini dilengkapi bateri kurang jangka hayat, jadi simpanan tenaga adalah satu isu besar dalam WSN. Jika beban diimbang antara induk kelompok dan lebihan beban dihalang pada setiap rangkaian iaitu hanya sebilangan kecil nod pada tiap-tiap kelompok,  jangka hayat dapat dipanjangkan pada sesebuah rangkaian. Satu penyelesaian adalah dengan mengawal penggunaan tenaga dan mengimbangi beban antara nod menggunakan teknik berkelompok. Kajian ini mencadangkan kaedah baru pembahagian tenaga berkesan secara algoritma berkelompok bagi pembahagian data dalam WSN, dikenali sebagai Pembahagian Kelompok Kumpulan Data (DCDA). Melalui pendekatan baru ini, pokok transmisi optimum dibina antara nod sensor melalui kaedah baru. Stesen utama (BS) ialah akar, induk kelompok-kelompok (CHs) dan nod penyiar ialah nod perantara, dan nod-nod lain (nod-nod ahli kelompok) ialah daun bagi pokok trasmisi. DCDA mengimbangi beban CHs antara-kelompok dan dalam-kelompok komunikasi data daripada kelompok berbeza saiz. Bagi komunikasi berkesan dalam-kelompok, sebahagian nod penyampai akan memindahkan data antara CHs. Penggunaan tenaga, jarak ke stesen utama dan induk kelompok metrik sentrik adalah tiga parameter pelaras bagi pemilihan induk kelompok. Keputusan simulasi protokol yang dicadang menunjukkan pengurangan penggunaan tenaga pada nod-nod sensor individu dan memanjangkan jangka hayat rangkaian, berbanding kaedah-kaedah lain yang diketahui.

Sign in / Sign up

Export Citation Format

Share Document