scholarly journals Removal of Chromium and Nickel from Electroplating Wastewater Using Magnetite Particulate Adsorbent: (1) Effect of pH, Contact Time and Dosage, (2) Adsorption Isotherms and Kinetics

2016 ◽  
Vol 10 (7) ◽  
pp. 222 ◽  
Author(s):  
Donatus Dube ◽  
Champaklal T. Parekh ◽  
Bothwell Nyoni
Keyword(s):  
Metal Ions ◽  
City Council ◽  
Optimum Process ◽  
Order Kinetic ◽  
Heavy Load ◽  
Nickel Ions ◽  
Wide Range ◽  
Adsorption Processes ◽  
Wastewater Samples ◽  
Electroplating Process

Wastewater discharged into municipal sewer systems from electroplating process plants contains a heavy load of metal ions and often requires pre-discharge treatment. Treatment of wastewater to reduce the concentration of metal ions employing an adsorption process has been studied using a wide range of adsorbents. In this work, the concentrations of chromium and nickel ions in wastewater samples from a local electroplating shop were found to be above the limits set out by the Bulawayo City Council, and the Environmental Management Agency, a statutory agency under the Ministry of Environment and Tourism, Government of Zimbabwe. Furthermore, the removal of chromium and nickel ions from the wastewater using magnetite as an adsorbent is studied. Magnetite particulate adsorbent used in this experiment has demonstrated to be an effective adsorbent material. At the optimum process operating pH of 4 – 7 the absorbent was able to achieve removal rates of up to 99% for chromium and 98% for nickel. The adsorption processes for chromium and nickel have been proven to be physical in nature using the Dubinin-Radushkevich isotherm model. Also, the adsorption kinetics data fit well with pseudo second-order kinetic model.

scholarly journals Adsorption of Copper, Zinc and Nickel Ions from Single and Binary Metal Ion Mixtures on to Chicken Feathers

2002 ◽  
Vol 20 (9) ◽  
pp. 849-864 ◽  
Author(s):  
Sameer Al-Asheh ◽  
Fawzi Banat ◽  
Dheaya‘ Al-Rousan
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Metal Ion ◽  
Heavy Metal Ions ◽  
Batch Adsorption ◽  
Nickel Ions ◽  
Chicken Feathers ◽  
Binary Metal ◽  
Adsorption Processes ◽  
Copper Zinc

Certain industries often produce mixtures of heavy metal ions in their waste products. Because of the nature of heavy metal ions and the adsorption process, such metal ions can compete with each other for the sorption sites on an adsorbent during adsorption processes. In the present work, binary systems composed of copper, zinc and nickel ions were selected as examples of heavy metal ion mixtures and tested via batch adsorption processes using chicken feathers as an adsorbent. The uptake of individual metal ions was depressed by the presence of another. Thus, the uptake of copper ions from an initial copper ion solution of 20 ppm concentration was reduced from 0.042 mmol/g to ca. 0.019 mmol/g by the presence of a similar concentration of nickel ions. The Freundlich, Langmuir and Sips multi-component adsorption models were employed to predict the uptake of metal ions from binary metal ion solutions using constants obtained from adsorption isotherm models applied to single-solute systems.

scholarly journals Orange tree leaves, a perfect adsorbent for the removal of Cd (II), Co (II), Zn (II) from wastewater

2019 ◽  
Vol 25 (2) ◽  
pp. 107-117 ◽  
Author(s):  
Navid Nourbakhsh ◽  
Hassan Mousavi ◽  
Eskandar Kolvari ◽  
Aisan Khaligh
Keyword(s):  
Low Cost ◽  
Agricultural Waste ◽  
Order Kinetic ◽  
Tree Leaves ◽  
Orange Tree ◽  
Solution Studies ◽  
Removal Of Heavy Metals ◽  
Adsorption Processes ◽  
Order Kinetic Model ◽  
Wastewater Samples

The present study explores the uptake capacity of low-cost agricultural waste for the removal of heavy metals, Co2+, Cd2+ and Zn2+, from aqueous solution. Studies conformed to Freundlich, Langmuir and Temkin adsorption isotherms. The values of constants for the thermodynamic and kinetic isotherms were found. The kinetic isotherm experiment data could be well described with the pseudo-second order kinetic model and thermodynamic studies indicated that the adsorption processes were spontaneous and endothermic with orange tree leaves under natural conditions. Experiments showed that Cd2+, Co2+ and Zn2+ adsorption increased with increasing pH and decreased with increasing the temperature and concentration of solutions. This study indicates that the developed method based on orange tree leaves is very simple, low-cost, fast and trusty for the removal of heavy metal ions from water and wastewater samples.

Synthesis and Characterization of Goethite Nanostructured powder: Application in the Simultaneous Removal of Co(II) and Ni(II) Ions from Aqueous Solution

MRS Advances ◽  
2018 ◽  
Vol 3 (42-43) ◽  
pp. 2675-2687
Author(s):  
C.R. Nangah ◽  
T.G. Merlain ◽  
N.J. Nsami ◽  
C.P. Tubwoh ◽  
K.J. Mbadcam ◽  
...  
Keyword(s):  
Metal Ions ◽  
Chemical Precipitation ◽  
Batch Adsorption ◽  
Simultaneous Removal ◽  
Order Kinetic ◽  
Surface Binding ◽  
Nickel Ions ◽  
Nanostructured Powder ◽  
Xrd Techniques ◽  
Cobalt And Nickel

Abstract:This study investigates the adsorption efficiency of goethite nanostructured powder for the simultaneous removal of cobalt and nickel ions. The nanostructured powder sample was synthesized via a chemical precipitation technique and characterized using SEM, FTIR-ATR and XRD techniques. From batch adsorption studies, maximum absorption for Co(II) and Ni(II) ions occurred at an equilibrium contact time of 80 min, with an adsorbent mass of 0.1 g, and at pH=7. Co(II) ions showed greater affinity to the nanoparticles as compared to Ni(II). The maximum quantities adsorbed were recorded as 148.5 mg/g for Co(II) and 110.6 mg/g for Ni(II) ions. The best isotherm model fit for both metal ions was the Freundlich model indicating heterogeneity of the surface binding sites. The pseudo-second order kinetic model was the best-fit model: an indication of a strong chemical adsorption between the adsorbent surface and metal ions. The findings show that the goethite nanostructured powder is a very effective adsorbent material and prominent candidate for the simultaneous removal of cobalt and nickel ions from water.

Solution chemistry effects on the solvation shell of metal ions

2020 ◽  
Author(s):  
Xiangwen Wang ◽  
Dimitrios Toroz ◽  
Seonmyeong Kim ◽  
Simon Clegg ◽  
Gun-Sik Park ◽  
...  
Keyword(s):  
Metal Ions ◽  
Pure Water ◽  
Solvation Shell ◽  
Solution Chemistry ◽  
Chemical Characteristics ◽  
Velocity Autocorrelation Function ◽  
Ionic Solvation ◽  
General Terms ◽  
Alkaline Earth Metal Ions ◽  
Wide Range

<div> <p>As natural aqueous solutions are far from being pure water, being rich in ions, the properties of solvated ions are of relevance for a wide range of systems, including biological and geochemical environments. We conducted ab initio and classical MD simulations of the alkaline earth metal ions Mg<sup>2+</sup> and Ca<sup>2+</sup> and of the alkali metal ions Li<sup>+</sup>, Na<sup>+</sup>, K<sup>+</sup> and Cs<sup>+</sup> in pure water and electrolyte solutions containing the counterions Cl<sup>–</sup> and SO<sub>4</sub><sup>2–</sup>. Through a detailed analysis of these simulations, this study reports on the effect of solution chemistry (composition and concentration of the solution) to the ion–water structural properties and interaction strength, and to the dynamics, hydrogen bond network, and low-frequency dynamics of the ionic solvation shell. Except for the ion–water radial distribution function, which is weakly dependent on the counter-ions and concentrations, we found that all other properties can be significantly influenced by the chemical characteristics of the solution. Calculation of the velocity autocorrelation function of magnesium ions, for example, shows that chlorine ions located in the second coordination shell of Mg<sup>2+</sup> weaken the Mg(H<sub>2</sub>O)<sub>6</sub><sup>2+</sup> hydration ‘cage’ of the cation. The result reported in this study suggest that ionic solvation shell can be significantly influenced by the interactions between other ions present in solution ions, especially those of opposite charge. In more general terms, the chemical characteristics of the solution, including the balance between ion-solvent and ion-ion interactions, could result in significant differences in behavior and function of the ionic solvation shell.</p> </div>

Chitosan-based Magnetic Composites - Efficient Adsorbents for Removal of Pb(II) and Cu(II) from Aqueous Mono and Bicomponent Solutions

2018 ◽  
Vol 69 (9) ◽  
pp. 2323-2330 ◽  
Author(s):  
Daniela C. Culita ◽  
Claudia Maria Simonescu ◽  
Rodica Elena Patescu ◽  
Nicolae Stanica
Keyword(s):  
Aqueous Solutions ◽  
Metal Ions ◽  
Chemical Properties ◽  
Order Kinetic ◽  
Mass Ratio ◽  
Magnetic Adsorbent ◽  
Magnetic Composites ◽  
Initial Ph ◽  
Order Kinetic Model ◽  
Physical And Chemical

A series of three chitosan-based magnetic composites was prepared through a simple coprecipitation method. It was investigated the influence of mass ratio between chitosan and magnetite on the physical and chemical properties of the composites in order to establish the optimum conditions for obtaining a composite with good adsorption capacity for Pb(II) and Cu(II) from mono and bicomponent aqueous solutions. It was found that the microspheres prepared using mass ratio chitosan / magnetite 1.25/1, having a saturation magnetization of 15 emu g--1, are the best to be used as adsorbent for the metal ions. The influence of different parameters such as initial pH values, contact time, initial concentration of metal ions, on the adsorption of Pb(II) and Cu(II) onto the chitosan-based magnetic adsorbent was investigated in details. The adsorption process fits the pseudo-second-order kinetic model in both mono and bicomponent systems, and the maximum adsorption capacities calculated on the basis of the Langmuir model were 79.4 mg g--1 for Pb(II) and 48.5 mg g--1 for Cu(II) in monocomponent systems, while in bicomponent systems were 88.3 and 49.5 mg g--1, respectively. The results revealed that the as prepared chitosan-based magnetic adsorbent can be an effective and promising adsorbent for Pb(II) and Cu(II) from mono and bicomponent aqueous solutions.

Comparison of the fixation of several metal ions onto a low-cost biopolymer

2002 ◽  
Vol 2 (5-6) ◽  
pp. 217-224 ◽  
Author(s):  
Z. Reddad ◽  
C. Gérente ◽  
Y. Andrès ◽  
P. Le Cloirec
Keyword(s):  
Aqueous Solutions ◽  
Metal Ions ◽  
Low Cost ◽  
Operating Conditions ◽  
Order Kinetic ◽  
Adsorption Mechanisms ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Beet Pulp ◽  
Removal Of Metal Ions

In the present work, sugar beet pulp, a common waste from the sugar refining industry, was studied in the removal of metal ions from aqueous solutions. The ability of this cheap biopolymer to sorb several metals namely Pb2+, Cu2+, Zn2+, Cd2+ and Ni2+ in aqueous solutions was investigated. The metal fixation capacities of the sorbent were determined according to operating conditions and the fixation mechanisms were identified. The biopolymer has shown high elimination rates and interesting metal fixation capacities. A pseudo-second-order kinetic model was tested to investigate the adsorption mechanisms. The kinetic parameters of the model were calculated and discussed. For 8 × 10-4 M initial metal concentration, the initial sorption rates (v0) ranged from 0.063 mmol.g-1.min-1 for Pb2+ to 0.275 mmol.g-1.min-1 for Ni2+ ions, with the order: Ni2+ &gt; Cd2+ &gt; Zn2+ &gt; Cu2+ &gt; Pb2+. The equilibrium data fitted well with the Langmuir model and showed the following affinity order of the material: Pb2+ &gt; Cu2+ &gt; Zn2+ &gt; Cd2+ &gt; Ni2+. Then, the kinetic and equilibrium parameters calculated qm and v0 were tentatively correlated to the properties of the metals. Finally, equilibrium experiments in multimetallic systems were performed to study the competition of the fixation of Pb2+, Zn2+ and Ni2+ cations. In all cases, the metal fixation onto the biopolymer was found to be favourable in multicomponent systems. Based on these results, it is demonstrated that this biosorbent represents a low-cost solution for the treatment of metal-polluted wastewaters.

The Binding and Viscometric Studies of Ni+2, Co+2 and Mn+2 Ions with Protein by Spectrometric and pH Metric Techniques

2019 ◽  
Vol 9 (2) ◽  
pp. 151-162
Author(s):  
Shveta Acharya ◽  
Arun Kumar Sharma
Keyword(s):  
Metal Ions ◽  
Metal Ion ◽  
Protein Molecule ◽  
Vital Role ◽  
Sufficient Evidence ◽  
Structural Requirement ◽  
Nickel Ions ◽  
Cobalt Ions ◽  
Lower Temperature ◽  
Specific Oxidation

Background: The metal ions play a vital role in a large number of widely differing biological processes. Some of these processes are quite specific in their metal ion requirements. In that only certain metal ions, in specific oxidation states, can full fill the necessary catalytic or structural requirement, while other processes are much less specific. Objective: In this paper we report the binding of Mn (II), Ni (II) and Co (II) with albumin are reported employing spectrophotometric and pH metric method. In order to distinguish between ionic and colloidal linking, the binding of metal by using pH metric and viscometric methods and the result are discussed in terms of electrovalent and coordinate bonding. Methods: The binding of Ni+2, Co+2 and Mn+2 ions have been studied with egg protein at different pH values and temperatures by the spectrometric technique. Results: The binding data were found to be pH and temperature dependent. The intrinsic association constants (k) and the number of binding sites (n) were calculated from Scatchard plots and found to be at the maximum at lower pH and at lower temperatures. Therefore, a lower temperature and lower pH offered more sites in the protein molecule for interaction with these metal ions. Statistical effects seem to be more significant at lower Ni+2, Co+2 and Mn+2 ions concentrations, while at higher concentrations electrostatic effects and heterogeneity of sites are more significant. Conclusion: The pH metric as well as viscometric data provided sufficient evidence about the linking of cobalt, nickel and manganese ions with the nitrogen groups of albumin. From the nature and height of curves in the three cases it may be concluded that nickel ions bound strongly while the cobalt ions bound weakly.

scholarly journals Stormwater Runoff Treatment Using Pervious Concrete Modified with Various Nanomaterials: A Comprehensive Review

2021 ◽  
Vol 13 (15) ◽  
pp. 8552
Author(s):  
Vahid Alimohammadi ◽  
Mehdi Maghfouri ◽  
Delaram Nourmohammadi ◽  
Pejman Azarsa ◽  
Rishi Gupta ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Compressive Strength ◽  
Adsorption Capacity ◽  
Removal Rate ◽  
Stormwater Runoff ◽  
Infiltration Rate ◽  
Stormwater Treatment ◽  
Adsorption Mechanisms ◽  
Wide Range ◽  
Adsorption Processes

Clean water is a vital need for all living creatures during their lifespan. However, contaminated stormwater is a major issue around the globe. A wide range of contaminants, including heavy metals, organic and inorganic impurities, has been discovered in stormwater. Some commonly utilized methods, such as biological, physical and chemical procedures, have been considered to overcome these issues. However, these current approaches result in moderate to low contaminant removal efficiencies for certain classes of contaminants. Of late, filtration and adsorption processes have become more featured in permeable concretes (PCs) for the treatment of stormwater. As nanoparticles have vast potential and unique characterizations, such as a higher surface area to cure polluted stormwater, employing them to improve permeable concretes’ capabilities in stormwater treatment systems is an effective way to increase filtration and adsorption mechanisms. The present study reviews the removal rate of different stormwater contaminants such as heavy metals, organic and other pollutants using nanoparticle-improved PC. The application of different kinds of nanomaterials in PC as porous media to investigate their influences on the properties of PC, including the permeability rate, compressive strength, adsorption capacity and mix design of such concrete, was also studied. The findings of this review show that different types of nanomaterials improve the removal efficiency, compressive strength and adsorption capacity and decrease the infiltration rate of PC during the stormwater treatment process. With regard to the lack of comprehensive investigation concerning the use of nanomaterials in PC to treat polluted stormwater runoff, this study reviews 242 published articles on the removal rate of different stormwater contaminants by using PC improved with nanoparticles.

scholarly journals Effective Magnetic MOFs Adsorbent for the Removal of Bisphenol A, Tetracycline, Congo Red and Methylene Blue Pollutions

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1917
Author(s):  
Guangpu Zhang ◽  
Rong Wo ◽  
Zhe Sun ◽  
Gazi Hao ◽  
Guigao Liu ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Electron Microscope ◽  
Bisphenol A ◽  
Congo Red ◽  
Reduction Process ◽  
Entropy Change ◽  
Potential Candidate ◽  
Order Kinetic ◽  
Adsorption Processes ◽  
Infrared Spectrometer

A magnetic metal−organic frameworks adsorbent (Fe3O4@MIL-53(Al)) was prepared by a typical solvothermal method for the removal of bisphenol A (BPA), tetracycline (TC), congo red (CR), and methylene blue (MB). The prepared Fe3O4@MIL-53(Al) composite adsorbent was well characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffraction (XRD), and fourier transform infrared spectrometer (FTIR). The influence of adsorbent quantity, adsorption time, pH and ionic strength on the adsorption of the mentioned pollutants were also studied by a UV/Vis spectrophotometer. The adsorption capacities were found to be 160.9 mg/g for BPA, 47.8 mg/g for TC, 234.4 mg/g for CR, 70.8 mg/g for MB, respectively, which is superior to the other reported adsorbents. The adsorption of BPA, TC, and CR were well-fitted by the Langmuir adsorption isotherm model, while MB followed the Freundlich model, while the adsorption kinetics data of all pollutants followed the pseudo-second-order kinetic models. The thermodynamic values, including the enthalpy change (ΔH°), the Gibbs free energy change (ΔG°), and entropy change (ΔS°), showed that the adsorption processes were spontaneous and exothermic entropy-reduction process for BPA, but spontaneous and endothermic entropy-increasing processes for the others. The Fe3O4@MIL-53(Al) was also found to be easily separated after external magnetic field, can be a potential candidate for future water treatment.

scholarly journals Ideal pH for the adsorption of metal ions Cr6+, Ni2+, Pb2+ in aqueous solution with different adsorbent materials

2021 ◽  
Vol 6 (1) ◽  
pp. 115-123
Author(s):  
Luísa P. Cruz-Lopes ◽  
Morgana Macena ◽  
Bruno Esteves ◽  
Raquel P. F. Guiné
Keyword(s):  
Heavy Metals ◽  
Metal Ions ◽  
Walnut Shell ◽  
Lead Adsorption ◽  
Viable Solution ◽  
Chestnut Shell ◽  
Adsorption Processes ◽  
Irreversible Effects ◽  
Optimal Values ◽  
Ph Range

Abstract Industrialization increases the number of heavy metals released into the environment. Lead (Pb2+), nickel (Ni2+) and chromium (Cr6+) are among these toxic metals and cause irreversible effects on ecosystems and human health due to their bio-accumulative potential. The decontamination through adsorption processes using lignocellulosic wastes from agricultural and/or forestry processes is a viable solution. Hence, this work aimed at studying the effect of pH on the biosorption of the metal ions using four different by-product materials: walnut shell, chestnut shell, pinewood and burnt pinewood. These experiments were conducted with solutions of the three heavy metals in which the adsorbents were immersed to measure the rate of adsorption. A range of pH values from 3.0 to 7.5 was used in the experiments, and the concentrations were determined by atomic absorption. The results showed different behaviour of the biosorbent materials when applied to the different metals. The lead adsorption had an ideal pH in the range of 5.5–7.5 when the walnut shell was used as an adsorbent, corresponding to values of adsorption greater than 90%, but for the other materials, maximum adsorption occurred for a pH of 7.5. For the adsorption of chromium, the pH was very heterogeneous with all adsorbents, with optimal values of pH varying from 3.0 (for chestnut shell) to 6.5 (for walnut shell and wood). For nickel, the best pH range was around pH 5, with different values according to the lignocellulosic material used. These results indicate that the tested biosorbents have the potential to decontaminate wastewater in variable extensions and that by controlling the pH of the solution; a more efficient removal of the heavy metals can be achieved.

Sign in / Sign up

Export Citation Format

Share Document