A Novel Rapid Approach for the Estimation of Ketoconazole Using Reverse Phase Ultra Performance Liquid Chromatography in Bulk and Tablet Dosage from

2020 ◽  
Vol 11 (1) ◽  
pp. 01-05
Author(s):  
Sumanta Mondal ◽  
Chanchala Alekya ◽  
Prasenjit Mondal
Author(s):  
Geetha Susmita A ◽  
Rajitha G ◽  
Ramya Yadav Y ◽  
Uma P

Objective: The objective of this study was to develop and validate a stability-indicating reverse-phase high-performance liquid chromatography (RP-HPLC) method for the simultaneous estimation of the metformin and empagliflozin in tablet dosage forms.Methods: The chromatographic conditions were optimized and it was run through Std. BDS (250 mm × 4.6 mm, 5 m) column with mobile phase consisting of 0.1% orthophosphoric acid buffer: acetonitrile in the ratio of 50:50. The flow rate was 1 ml/min and optimized wavelength was 210 nm. Temperature was maintained at 30°C.Results: The retention times of metformin and empagliflozin were found to be 2.588 min and 3.679 min and percentage relative standard deviation (RSD) of the metformin and empagliflozin was found to be 0.59 and 1.2, respectively. Percentage recovery was in the range of 100.01–100.65% for metformin and empagliflozin, respectively.Conclusion: A sensitive, rapid, and specific method has been developed for the simultaneous estimation of metformin and empagliflozin using RP-HPLC in tablet dosage form.


2018 ◽  
Vol 9 (2) ◽  
pp. 94-98
Author(s):  
Sumanta Mondal ◽  
Goluguri Sunil Reddy ◽  
Prasenjit Mondal ◽  
Vadlapati Sheeba Prathyusha ◽  
Aishwarya P Nair ◽  
...  

2021 ◽  
Vol 19 (1) ◽  
pp. 19-28
Author(s):  
SANTOSH GANDHI ◽  
MANGESH BHALEKAR ◽  
RAVINA MUTHA

The aim of the present study was to develop a simple isocratic reverse phase-high performance liquid chromatography (RP-HPLC) method and validate for the determination of fenofibrate in tablet dosage forms. RP-HPLC method was developed using Hi Q Sil C18 (250 cm × 4.6 mm, 5 μm) and mobile phase comprising 1 mM ammonium acetate buffer: Acetonitrile (10:90 v/v) at a flow rate of 1.0 mL/min. The detection was carried out at 290 nm. The retention time was found to be 6.15 ± 0.03 min. Validation of the method was performed for precision, accuracy, linearity, robustness, specificity and sensitivity to conform to the International Conference on Harmonization (ICH) guidelines. The data of linear regression analysis indicated a good linear response in the concentration range of 5 μg/mL–30 μg/mL with correlation co-efficient (R2) of 0.997. The developed method was found to be simple, sensitive, accurate and repeatable for assay of tablets of fenofibrate prepared using crystallo-co-agglomerates of the drug.


Author(s):  
Geetha Susmita A ◽  
Rajitha G ◽  
Ramya Yadav Y ◽  
Uma P

Objective: The objective of this study was to develop and validate a stability-indicating reverse-phase high-performance liquid chromatography (RP-HPLC) method for the simultaneous estimation of the metformin and empagliflozin in tablet dosage forms.Methods: The chromatographic conditions were optimized and it was run through Std. BDS (250 mm × 4.6 mm, 5 m) column with mobile phase consisting of 0.1% orthophosphoric acid buffer: acetonitrile in the ratio of 50:50. The flow rate was 1 ml/min and optimized wavelength was 210 nm. Temperature was maintained at 30°C.Results: The retention times of metformin and empagliflozin were found to be 2.588 min and 3.679 min and percentage relative standard deviation (RSD) of the metformin and empagliflozin was found to be 0.59 and 1.2, respectively. Percentage recovery was in the range of 100.01–100.65% for metformin and empagliflozin, respectively.Conclusion: A sensitive, rapid, and specific method has been developed for the simultaneous estimation of metformin and empagliflozin using RP-HPLC in tablet dosage form.


Author(s):  
Ramreddy Godela ◽  
Sherisha Bhavani

Objective: The most important objective of the present research work is to develop simple, specific, rapid, accurate, and sensitive reverse-phase high-performance liquid chromatography method and validated for the qualitative and quantitative determination of valsartan in its active pharmaceutical ingredient and tablet dosage form according to ICH guidelines.Proposed Method: An isocratic separation was done using Phenomenex C18 column possess 75×4.6 mm, 2.6 μ,100 A0 dimensions with mobile phase composition of water:acetonitrile (30:70% v/v) by maintaining 1 ml/minute flow rate and response detected at a wavelength of 247 nm.Results: The retention time of valsartan was found to be 2.71 minutes, limit of detection and limit of quantification were observed at 1.24 μg/ml and 3.6 μg/ml concentration, respectively, and a calibration curve was linear in the concentration range of 5-50 μg/ml with coefficient of correlation 0.99. The percentage recovery (accuracy) was in the range of 98.9-102%, and the % relative standard deviation was observed to be <2%.Conclusion: The proposed method was validated for accuracy, precision, sensitivity, linearity, and robustness and successfully employed for the quantitative determination of valsartan in tablet dosage form in quality control department of pharmaceutical industry.


2019 ◽  
Vol 9 (2) ◽  
pp. 217-221
Author(s):  
Bandari Sukanya ◽  
V Mohan Goud ◽  
P Anitha

Ultra performance liquid chromatography method was developed for the simultaneous estimation of the Artemether (AMT) and Lumefantrine (LFT) in Tablet dosage form. Chromatogram was run through X-bridge C18 100 x 2.1 mm, 3.5m. Mobile phase containing Buffer 0.01N KH2PO4 (3.5pH): Acetonitrile taken in the ratio 55:45 was pumped through column at a flow rate of 0.3ml/min. Buffer used in this method was 0.01N KH2PO4. Temperature was maintained at 30°C. Optimized wavelength selected was 215nm. Retention time of AMT and LFT were found to be 0.787 min and 1.572min. %RSD of the AMT and LFT were and found to be 0.7 and 0.6 respectively. %Recovery was obtained as 99.49% and 100.22% for AMT and LFT respectively. LOD, LOQ values obtained from regression equations of AMT and LFT were 0.03, 0.08 and 0.095, 0.288 respectively. Regression equation of AMT is y = 19308x + 1509 and y = 36919x + 11566 of LFT. The developed method was simple and economical that can be adopted in regular Quality control test in Industries. Keywords: Artemether (AMT), Lumefantrine (LFT), Acetonitrile, UPLC.


Sign in / Sign up

Export Citation Format

Share Document