scholarly journals Justification for application of in-situ combustion method at high-viscosity oil fields

2021 ◽  
Vol 3 (2) ◽  
pp. 42-53
Author(s):  
V. I. Tokarev ◽  
A. A. Akhmet ◽  
A. K. Garifov
Keyword(s):  
Oil Recovery ◽  
Reservoir Simulation ◽  
Combustion Method ◽  
High Viscosity ◽  
Oil Fields ◽  
In Situ Combustion ◽  
High Viscosity Oil

The article describes one of the methods of enhancing oil recovery, the experience of its application, including global, and the design of the development (using 3D reservoir simulation) with the arrangement of the pilot area, taking into account the peculiarities of the method.

Cyclical Gel-Polymer Flooding Technology is an Effective Method of Enhanced Oil Recovery in High-Viscosity Oil Fields

2020 ◽  
Author(s):  
Svetlana Yur’evna Lobanova ◽  
Berdibek Ulanovich Yelubaev ◽  
Nikolay Evgen’evich Talamanov ◽  
Zhijian Sun ◽  
Chunxi Wang ◽  
...  
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
High Viscosity ◽  
Polymer Flooding ◽  
Oil Fields ◽  
High Viscosity Oil

scholarly journals Hydrodynamic modeling of field development using enhanced oil recovery methods

2021 ◽  
Vol 317 (2) ◽  
pp. 14-22
Author(s):  
G.Zh. Moldabayeva ◽  
◽  
A.Kh. Agzamov ◽  
R.T. Suleimenova ◽  
D.K. Elefteriadi ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Seismic Data ◽  
Water Injection ◽  
Steam Injection ◽  
High Viscosity ◽  
Oil Fields ◽  
Borehole Data ◽  
Field Development ◽  
High Viscosity Oil ◽  
Cyclic Injection

This article discusses a digital geological model, the transfer of borehole data to the geological grid, and the modeling of the technology of alternating steam and water injection. Alternating injection involves the cyclic injection of steam and water into an injection well in high-viscosity oil fields. The essence of this technology is that during the steam injection for 2-4 months, the formation warms up, leading to a decrease in viscosity and an increase in oil mobility. Then comes the period of water injection, during which the production of already warmed oil continues and the formation pressure is maintained. For digital geological modeling, the following data were collected, processed and prepared: a list of wells that open the object of modeling, coordinates of wellheads, well altitudinal data, inclinometry of well trajectories, GМS data on wells, analysis of wells drilled with core sampling, and digitized seismic data (structural surfaces on the roof of stratigraphic horizons, parameter maps, contact surfaces, faults, structural maps on the roof of target horizons with faults, isochron maps, velocity maps).

Cyclical Gel-Polymer Flooding Technology is an Effective Method of Enhanced Oil Recovery in High-Viscosity Oil Fields (Russian)

2020 ◽  
Author(s):  
Svetlana Yur’evna Lobanova ◽  
Berdibek Ulanovich Yelubaev ◽  
Nikolay Evgen’evich Talamanov ◽  
Zhijian Sun ◽  
Chunxi Wang ◽  
...  
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
High Viscosity ◽  
Polymer Flooding ◽  
Oil Fields ◽  
High Viscosity Oil

scholarly journals Effective EOR methods in high-viscosity oil fields: cyclical GEL-polymer flooding and ASP flooding

2021 ◽  
Vol 3 (3) ◽  
pp. 61-74
Author(s):  
F. E. Safarov ◽  
S. Yu. Lobanova ◽  
B. Ye. Yelubaev ◽  
N. E. Talamanov ◽  
Sun Zhijian ◽  
...  
Keyword(s):  
Oil Recovery ◽  
High Viscosity ◽  
Polymer Flooding ◽  
Oil Field ◽  
Oil Fields ◽  
Tracer Studies ◽  
Asp Flooding ◽  
Reservoir Conditions ◽  
High Viscosity Oil ◽  
Pilot Tests

The presented work discusses increasing oil recovery factor using physicochemical EOR methods. This article presents the field pilot tests results related to cyclical gel polymer flooding technology as applied under the conditions productive reservoirs rich in high-viscosity oils (viscosity in reservoir conditions above 300 mPa s) of the Buzachi North oil field, extending the boundaries of application of these methods. The work used the methods of hydrodynamic modeling, mathematical analysis; the necessary parameters of fractures and super reservoirs for calculating the working volumes of the injected compositions were estimated using tracer studies.

Fuel Formation and Conversion During In-Situ Combustion of Crude Oil

SPE Journal ◽  
2013 ◽  
Vol 18 (06) ◽  
pp. 1217-1228 ◽  
Author(s):  
Hascakir Berna ◽  
Cynthia M. Ross ◽  
Louis M. Castanier ◽  
Anthony R. Kovscek
Keyword(s):  
Oil Recovery ◽  
Photoelectron Spectroscopy ◽  
Combustion Front ◽  
Combustion Products ◽  
Combustion Tube ◽  
Cross Sectional ◽  
In Situ Combustion ◽  
X Ray ◽  
Study Results

Summary In-situ combustion (ISC) is a successful method with great potential for thermal enhanced oil recovery. Field applications of ISC are limited, however, because the process is complex and not well-understood. A significant open question for ISC is the formation of coke or "fuel" in correct quantities that is sufficiently reactive to sustain combustion. We study ISC from a laboratory perspective in 1 m long combustion tubes that allow the monitoring of the progress of the combustion front by use of X-ray computed tomography (CT) and temperature profiles. Two crude oils—12°API (986 kg/m3) and 9°API (1007 kg/m3)—are studied. Cross-sectional images of oil movement and banking in situ are obtained through the appropriate analysis of the spatially and temporally varying CT numbers. Combustion-tube runs are quenched before front breakthrough at the production end, thereby permitting a post-mortem analysis of combustion products and, in particular, the fuel (coke and coke-like residues) just downstream of the combustion front. Fuel is analyzed with both scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). XPS and SEM results are used to identify the shape, texture, and elemental composition of fuel in the X-ray CT images. The SEM and XPS results aid efforts to differentiate among combustion-tube results with significant and negligible amounts of clay minerals. Initial results indicate that clays increase the surface area of fuel deposits formed, and this aids combustion. In addition, comparisons are made of coke-like residues formed during experiments under an inert nitrogen atmosphere and from in-situ combustion. Study results contribute to an improved mechanistic understanding of ISC, fuel formation, and the role of mineral substrates in either aiding or impeding combustion. CT imaging permits inference of the width and movement of the fuel zone in situ.

An Experimental Investigation of In Situ Combustion in High Permeability Contrast Systems

2021 ◽  
pp. 1-13
Author(s):  
Melek Deniz Paker ◽  
Murat Cinar
Keyword(s):  
Oil Recovery ◽  
Heavy Oil ◽  
Combustion Front ◽  
Fractured Reservoirs ◽  
Front Propagation ◽  
High Permeability ◽  
Vertical Orientation ◽  
In Situ Combustion ◽  
Horizontal Orientation

Abstract A significant portion of world oil reserves reside in naturally fractured reservoirs and a considerable amount of these resources includes heavy oil and bitumen. Thermal enhanced oil recovery methods (EOR) are mostly applied in heavy oil reservoirs to improve oil recovery. In situ combustion (/SC) is one of the thermal EOR methods that could be applicable in a variety of reservoirs. Unlike steam, heat is generated in situ due to the injection of air or oxygen enriched air into a reservoir. Energy is provided by multi-step reactions between oxygen and the fuel at particular temperatures underground. This method upgrades the oil in situ while the heaviest fraction of the oil is burned during the process. The application of /SC in fractured reservoirs is challenging since the injected air would flow through the fracture and a small portion of oil in the/near fracture would react with the injected air. Only a few researchers have studied /SC in fractured or high permeability contrast systems experimentally. For in situ combustion to be applied in fractured systems in an efficient way, the underlying mechanism needs to be understood. In this study, the major focus is permeability variation that is the most prominent feature of fractured systems. The effect of orientation and width of the region with higher permeability on the sustainability of front propagation are studied. The contrast in permeability was experimentally simulated with sand of different particle size. These higher permeability regions are analogous to fractures within a naturally fractured rock. Several /SC tests with sand-pack were carried out to obtain a better understanding of the effect of horizontal vertical, and combined (both vertical and horizontal) orientation of the high permeability region with respect to airflow to investigate the conditions that are required for a self-sustained front propagation and to understand the fundamental behavior. Within the experimental conditions of the study, the test results showed that combustion front propagated faster in the higher permeability region. In addition, horizontal orientation almost had no effect on the sustainability of the front; however, it affected oxygen consumption, temperature, and velocity of the front. On the contrary, the vertical orientation of the higher permeability region had a profound effect on the sustainability of the combustion front. The combustion behavior was poorer for the tests with vertical orientation, yet the produced oil AP/ gravity was higher. Based on the experimental results a mechanism has been proposed to explain the behavior of combustion front in systems with high permeability contrast.

Sign in / Sign up

Export Citation Format

Share Document