scholarly journals Application of Plackett-Burman Experimental Design for Lipase Production by Aspergillus niger Using Shea Butter Cake

2013 ◽  
Vol 2013 ◽  
pp. 1-5 ◽  
Author(s):  
Aliyu Salihu ◽  
Muntari Bala ◽  
Shuaibu M. Bala
Keyword(s):  
Aspergillus Niger ◽  
Statistical Approach ◽  
Tween 80 ◽  
Lipase Production ◽  
Rapid Identification ◽  
Shea Butter ◽  
Medium Components ◽  
Burman Design ◽  
Plackett Burman Design ◽  
Main Substrate

Plackett-Burman design was used to efficiently select important medium components affecting the lipase production by Aspergillus niger using shea butter cake as the main substrate. Out of the eleven medium components screened, six comprising of sucrose, (NH4)2SO4, Na2HPO4, MgSO4, Tween-80, and olive oil were found to contribute positively to the overall lipase production with a maximum production of 3.35 U/g. Influence of tween-80 on lipase production was investigated, and 1.0% (v/w) of tween-80 resulted in maximum lipase production of 6.10 U/g. Thus, the statistical approach employed in this study allows for rapid identification of important medium parameters affecting the lipase production, and further statistical optimization of medium and process parameters can be explored using response surface methodology.

scholarly journals Optimization of Physiochemical Parameters during Bioremediation of Synthetic Dye byMarasmius cladophyllusUMAS MS8 Using Statistical Approach

2016 ◽  
Vol 2016 ◽  
pp. 1-7 ◽  
Author(s):  
Fatin Nur Sufinas Shuib ◽  
Ahmad Husaini ◽  
Azham Zulkharnain ◽  
Hairul Azman Roslan ◽  
Tay Meng Guan
Keyword(s):  
Statistical Approach ◽  
Inoculum Size ◽  
Synthetic Dyes ◽  
Natural Approach ◽  
Medium Components ◽  
Physiochemical Parameters ◽  
Burman Design ◽  
Plackett Burman Design ◽  
By Products ◽  
Fungus Growth

In many industrial areas such as in food, pharmaceutical, cosmetic, printing, and textile, the use of synthetic dyes has been integral with products such as azo dye, anthrax, and dyestuffs. As such, these industries produce a lot of waste by-products that could contaminate the environment. Bioremediation, therefore, has become an important emerging technology due to its cost-sustainable, effective, natural approach to cleaning up contaminated groundwater and soil via the use of microorganisms. The use of microorganisms in bioremediation requires the optimisation of parameters used in cultivating the organism. Thus the aim of the work was to assess the degradation of Remazol Brilliant Blue R (RBBR) dye on soil using Plackett-Burman design by the basidiomycete,M. cladophyllusUMAS MS8. Biodegradation analyses were carried out on a soil spiked with RBBR and supplemented with rice husk as the fungus growth enhancer. A two-level Plackett-Burman design was used to screen the medium components for the effects on the decolourization of RBBR. For the analysis, eleven variables were selected and from these four parameters, dye concentration, yeast extract concentration, inoculum size, and incubation time, were found to be most effective to degrade RBBR with up to 91% RBBR removal in soil after 15 days.

scholarly journals Medium Optimization for Spore Production of a Straw-Cellulose Degrading Actinomyces Strain under Solid-State Fermentation Using Response Surface Method

2020 ◽  
Vol 12 (21) ◽  
pp. 8893
Author(s):  
Huanran Liu ◽  
Dan Zhang ◽  
Xia Zhang ◽  
Chuanzhi Zhou ◽  
Pei Zhou ◽  
...  
Keyword(s):  
Solid State ◽  
Solid State Fermentation ◽  
Inorganic Nitrogen ◽  
Nitrogen Sources ◽  
Spore Production ◽  
Steepest Ascent ◽  
Medium Components ◽  
Burman Design ◽  
Plackett Burman Design ◽  
Central Composite

The strains capable of degrading cellulose have attracted much interest because of their applications in straw resource utilization in solid-state fermentation (SSF). However, achieving high spore production in SSF is rarely reported. The production of spores from Streptomyces griseorubens JSD-1 was investigated in shaker-flask cultivation in this study. The optimal carbon, organic nitrogen and inorganic nitrogen sources were sucrose, yeast extract and urea, respectively. Plackett–Burman design (PBD) was adopted to determine the key medium components, and the concentration levels of three components (urea, NaCl, MgSO4·7H2O) were optimized with the steepest ascent path and central composite design (CCD), achieving 1.72 × 109 CFU/g of spore production. Under the optimal conditions (urea 2.718% w/v, NaCl 0.0697% w/v, MgSO4·7H2O 0.06956% w/v), the practical value of spore production was 1.69 × 109 CFU/g. The determination coefficient (R2) was 0.9498, which ensures an adequate credibility of the model.

Medium Optimization for the Production of Phytase by Recombinant Pichia pastoris Grown on Glycerol

2011 ◽  
Vol 9 (1) ◽  
Author(s):  
Min Liu ◽  
Gabriel Potvin ◽  
Yiru Gan ◽  
Zhanbin Huang ◽  
Zisheng Zhang
Keyword(s):  
Pichia Pastoris ◽  
Phytase Production ◽  
Medium Components ◽  
Gap Promoter ◽  
Recombinant Pichia Pastoris ◽  
Burman Design ◽  
Statistical Designs ◽  
Plackett Burman Design ◽  
Central Composite ◽  
Three Components

Based on statistical designs, minimal salts medium, commonly used for yeast cultivation, was optimized to maximize GAP promoter-mediated phytase production by recombinant Pichia pastoris grown on glycerol. A Plackett-Burman design was followed to screen medium components to determine those that significantly affected phytase production. Of the 8 components studied, the concentrations of K2SO4, CaSO4•2H2O and MgSO4•7H2O were identified as having a significant effect. These three components were subsequently optimized by response surface methodology using a central composite design. The optimal concentrations of the three components, leading to a maximal extracellular phytase activity of 161.64 U/ml, were K2SO4 13.25g/l, CaSO4•2H2O 1.03g/l and MgSO4•7H2O 17.94g/l. The activity measured in cultures using optimized growth medium is significantly higher than the 73.31 U/ml measured in cultures using standard minimal salts media. The theoretical phytase yields predicted by the developed model were very close to experimentally obtained values.

scholarly journals Medium components screening for l (+) - lactic acid production by lactobacillus rhamnosus atcc 9595 using a plackett-burman design

2019 ◽  
Vol 5 (10) ◽  
pp. 22271-22285
Author(s):  
Marília Crivelari Cunha ◽  
Michelle Thiemi Masotti ◽  
Olga Lucía Mondragón-Bernal ◽  
José Guilherme Lembi Ferreira Alves
Keyword(s):  
Lactic Acid ◽  
Acid Production ◽  
Lactic Acid Production ◽  
Lactobacillus Rhamnosus ◽  
Medium Components ◽  
Burman Design ◽  
Plackett Burman Design

DESIGN OF CULTURAL CONDITIONS FOR PRODUCTION OF CHONDROITINASE BY ASPERGILLUS NIGER USING DESIGN OF EXPERIMENTS

INDIAN DRUGS ◽  
2015 ◽  
Vol 52 (06) ◽  
pp. 24-32
Author(s):  
N Kasinathan ◽  
◽  
V. M. Subrahmanyam ◽  
V. R Josyula
Keyword(s):  
Design Of Experiments ◽  
Yeast Extract ◽  
Spinal Cord Injuries ◽  
Box Behnken Design ◽  
Medium Components ◽  
Cultural Conditions ◽  
Burman Design ◽  
Level Of Significance ◽  
Optimized Conditions ◽  
Plackett Burman Design

Chondroitinases are useful in treating cancer and spinal cord injuries. The work reported so far does not focus on production of fungal chondroitinase. The present study focuses on the optimization of cultural conditions using design of experiments for production of chondroitinase by a fungal isolate CHCS-2, obtained from humus containing poultry waste. The cultural conditions were optimized systematically using a one-factor-at-a-time (OFAT) approach, factorial design, Plackett-Burman design (PBD) and Box- Behnken design to identify the composition of the production medium and the level of the variables. The level of significance of the medium components selected by OFAT study viz., yeast extract, chondroitin, and phosphate, was analyzed by factorial studies. The effect of eleven minerals on the enzyme yield was studied by PBD. The interaction among the medium components selected using factorial and PBD viz., yeast extract, cobalt and aluminum was investigated using the Box-Behnken design (BBD). Under the optimized conditions, maximum chondroitinase yield was 22.5 U/mL.

scholarly journals Application and characterization of crude fungal lipases used to degrade fat and oil wastes

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Amira Hassan Alabdalall ◽  
Norah A. Al-Anazi ◽  
Lena A. Aldakheel ◽  
Fatma H. I. Amer ◽  
Fatimah A. Aldakheel ◽  
...  
Keyword(s):  
Aspergillus Niger ◽  
Incubation Period ◽  
Lipase Activity ◽  
Tween 80 ◽  
Lipase Production ◽  
Industrial Applications ◽  
Waste Oil ◽  
Liquid Detergent ◽  
Optimal Incubation

AbstractAspergillus niger MH078571.1 and A. niger MH079049.1 were identified previously as the two highest Aspergillus niger strains producing lipase. Biochemical characterizations of lipase activity and stability for these two strains were examined and revealed that the optimal temperature is 45 °C at pH 8for A. niger MH078571.1 and 55 °C for MH079049.1. The lipase production of both strains was studied on medium contains waste oil, as a cheap source to reduce the industrial cost, showed that the optimal incubation period for the enzyme production is 3 days. Moreover, an experiment on lipase activates in organic solvents demonstrated that 50% of acetone is the best solvent for the two strains. In the presence of surfactants, 0.1% of tween 80 surfactant showed the best lipase activities. Furthermore, Mg2+ and Zn2+ ions enhanced the lipase activity of A. niger MH078571.1, while Na2+ and Cu2+ enhanced the enzyme activity of A. niger MH079049.1. Lipase activity was also tested for industrial applications such as integrating it with different detergents. Maximum lipase activity was obtained with 1% of Omo as a powder detergent for both strains. In liquid detergent, 0.1% of Fairy showed maximum lipase activity in A. niger MH078571.1, while the lipase in A. niger MH079049.1 was more effective in 1% of Lux. Moreover, the degradation of natural animal fat with crude enzyme was tested using chicken and sheep fats. The results showed that more than 90% of fats degraded after 5 days of the incubation period.

Sign in / Sign up

Export Citation Format

Share Document