scholarly journals Modeling and Analysis for Wear Performance in Dry Sliding of Epoxy/Glass/PTW Composites Using Full Factorial Techniques

2013 ◽  
Vol 2013 ◽  
pp. 1-11 ◽  
Author(s):  
M. Sudheer ◽  
Ravikantha Prabhu ◽  
K. Raju ◽  
Thirumaleshwara Bhat
Keyword(s):  
Friction Coefficient ◽  
Wear Rate ◽  
Hybrid Composites ◽  
Normal Load ◽  
Glass Fibers ◽  
Dry Sliding Wear ◽  
Dry Sliding ◽  
Sliding Velocity ◽  
Wear Performance ◽  
Full Factorial

The dry sliding friction and wear behavior of epoxy hybrid composites reinforced with glass fibers and a varying amount of potassium titanate whiskers (PTWs) fabricated by vacuum hand layup method were studied. The influence of normal load, sliding velocity, and whisker content on both friction coefficient and specific wear rate was investigated on a pin-on-disc machine. The tests were conducted at ambient conditions based on the 3 × 3 (3 factors at 3 levels) full factorial design. Analysis of variance (ANOVA) was performed to obtain the contribution of control parameters on friction coefficient and wear rate. The density and hardness of the composites were found to be enhanced with the PTW loading. The friction coefficient and wear resistance of the hybrid composites were found to be improved with the whisker content and were also greatly influenced by normal load and sliding velocity. A correlation between dry sliding wear behaviors of composites with wear parameters was obtained by multiple regressions. The worn out surface of selected samples was observed under scanning electron microscope (SEM) to identify wear mechanisms. This study revealed that the addition of the ceramic microfillers such as PTW improves the wear performance of the epoxy/glass polymer composites significantly.

INVESTIGATION ON DRY SLIDING WEAR BEHAVIOR OF TITANIUM DIOXIDE-REINFORCED MAGNESIUM MATRIX COMPOSITE

2021 ◽  
pp. 2150106
Author(s):  
P. C. ELUMALAI ◽  
R. GANESH
Keyword(s):  
Titanium Dioxide ◽  
Wear Rate ◽  
Coefficient Of Friction ◽  
Wear Mechanisms ◽  
Sliding Wear ◽  
Normal Load ◽  
Dry Sliding Wear ◽  
Dry Sliding ◽  
Sliding Velocity ◽  
Significant Change

In this work, the dry sliding wear behaviors of pure monolithic magnesium and magnesium–titanium dioxide (Mg–TiO2) composites were studied using pin-on-disc tribometer against an oil-hardened nonshrinking die steel (OHNS) counter-disc with a normal load of 0.5–2[Formula: see text]kg and a sliding velocity of 1.5–2.5[Formula: see text][Formula: see text] with the sliding distance and wear track diameter of 1500[Formula: see text]m and 90[Formula: see text]mm, respectively. The pin samples were characterized for their microstructural, nanomechanical and tribological properties such as wear rate, coefficient of friction and wear fractographs. Scanning electron microscopy (SEM) was used to analyze the worn-out surfaces of each pin sample in order to identify the different types of wear and wear mechanisms and the chemical constituents of each element were quantified by energy-dispersive spectroscopy. The influence of TiO2 reinforcements on the nanomechanical behavior was studied by nanoindentation technique. As compared with pure Mg, the nanoindentation strengths of Mg–1.5TiO2, Mg–2.5TiO2 and Mg–5TiO2 composites were found to increase by 11.9%, 22.2% and 35.8%, respectively, which was due to the addition of TiO2 particles and also due to the good bonding at the interface of TiO2 and magnesium particles. From the wear test results, a significant change in wear rate was observed with the change in normal load than that of sliding speed, whereas a significant change in coefficient of friction was noticed with the changes in both normal load and sliding velocity. The dominant wear mechanisms involved under the testing conditions were identified through plotting the contour maps and SEM fractographs. Also, from the fractographs it was noticed that delamination and plowing effect have been the significant wear mechanisms observed during low wear rate of samples, whereas melting, delamination and oxidation wear have been observed during high wear rate of pure Mg and its composites.

scholarly journals Optimization of Dry Sliding Wear Performance of Ceramic Whisker Filled Epoxy Composites Using Taguchi Approach

2012 ◽  
Vol 2012 ◽  
pp. 1-9 ◽  
Author(s):  
M. Sudheer ◽  
Ravikantha Prabhu ◽  
K. Raju ◽  
Thirumaleshwara Bhat
Keyword(s):  
Wear Rate ◽  
Sliding Wear ◽  
Normal Load ◽  
Epoxy Composites ◽  
Dry Sliding Wear ◽  
Dry Sliding ◽  
Wear Performance ◽  
Casting Technique ◽  
Pin On Disc ◽  
Sliding Distance

This study evaluates the influence of independent parameters such as sliding velocity (A), normal load (B), filler content (C), and sliding distance (D) on wear performance of potassium-titanate-whiskers (PTW) reinforced epoxy composites using a statistical approach. The PTW were reinforced in epoxy resin to prepare whisker reinforced composites of different compositions using vacuum-assisted casting technique. Dry sliding wear tests were conducted using a standard pin on disc test setup following a well planned experimental schedule based on Taguchi’s orthogonal arrays. With the signal-to-noise (S/N) ratio and analysis of variance (ANOVA) optimal combination of parameters to minimize the wear rate was determined. It was found that inclusion of PTW has greatly improved the wear resistance property of the composites. Normal load was found to be the most significant factor affecting the wear rate followed by (C), (D), and (A). Interaction effects of various control parameters were less significant on wear rate of composites.

Investigation of the Wear Behavior of High Strength and High Conductivity Cu-Cr-Zr Alloy under Dry Sliding

2015 ◽  
Vol 817 ◽  
pp. 661-666 ◽  
Author(s):  
Yuan Gao ◽  
Jin Chuan Jie ◽  
Peng Chao Zhang ◽  
Jian Zhang ◽  
Tong Min Wang ◽  
...  
Keyword(s):  
Friction Coefficient ◽  
Wear Rate ◽  
Mass Loss ◽  
Wear Behavior ◽  
Normal Load ◽  
Specific Wear Rate ◽  
Dry Sliding Wear ◽  
Composition Analysis ◽  
Dry Sliding ◽  
Zr Alloy

The dry sliding wear behavior of Cu-Cr-Zr alloy prepared by electromagnetic horizontal continuous casting was investigated. The wear behavior of the studied alloy was discussed in terms of friction coefficient, mass loss/sliding, specific wear rate and wear mechanism. The results indicate that with the increasing normal load and sliding velocity, the friction coefficient of Cu-Cr-Zr alloy decreased monotonically, the mass loss/sliding and specific wear rate increased. By wear surface morphology and composition analysis, the wear mechanisms were discussed preliminary. Oxidation and abrasion mechanisms dominated at the lower sliding velocities and loads. Increasing loads and velocities led to a combination of oxidation and adhesion. Plastic deformation was dominant for the higher applied load and sliding velocities.

Dry Sliding Wear Behavior of 2218 Al-Alloy-Al2O3(TiO2) Hybrid Composites

2017 ◽  
Vol 140 (2) ◽  
Author(s):  
Vineet Tirth
Keyword(s):  
Wear Rate ◽  
Sliding Wear ◽  
Hybrid Composites ◽  
Wear Behavior ◽  
Dry Sliding Wear ◽  
Aged Alloy ◽  
Dry Sliding ◽  
Al Alloy ◽  
Mathematical Relationship ◽  
Sliding Distance

AA2218–Al2O3(TiO2) composites are synthesized by stirring 2, 5, and 7 wt % of 1:2 mixture of Al2O3:TiO2 powders in molten AA2218 alloy. T61 heat-treated composites characterized for microstructure and hardness. Dry sliding wear tests conducted on pin-on-disk setup at available loads 4.91–13.24 N, sliding speed of 1.26 m/s up to sliding distance of 3770 m. Stir cast AA2218 alloy (unreinforced, 0 wt % composite) wears quickly by adhesion, following Archard's law. Aged alloy exhibits lesser wear rate than unaged (solutionized). Mathematical relationship between wear rate and load proposed for solutionized and peak aged alloy. Volume loss in wear increases linearly with sliding distance but drops with the increase in particle wt % at a given load, attributed to the increase in hardness due to matrix reinforcement. Minimum wear rate is recorded in 5 wt % composite due to increased particles retention, lesser porosity, and uniform particle distribution. In composites, wear phenomenon is complex, combination of adhesive and abrasive wear which includes the effect of shear rate, due to sliding action in composite, and abrasive effect (three body wear) of particles. General mathematical relationship for wear rate of T61 aged composite as a function of particle wt % load is suggested. Fe content on worn surface increases with the increase in particle content and counterface temperature increases with the increase in load. Coefficient of friction decreases with particle addition but increases in 7 wt % composite due to change in microstructure.

Friction Coefficient and Wear Rate of Different Materials Sliding Against Stainless Steel

2013 ◽  
Vol 1 (1) ◽  
pp. 33-45 ◽  
Author(s):  
Dewan Muhammad Nuruzzaman ◽  
Mohammad Asaduzzaman Chowdhury
Keyword(s):  
Stainless Steel ◽  
Friction Coefficient ◽  
Wear Rate ◽  
Normal Load ◽  
304 Stainless Steel ◽  
Sliding Velocity ◽  
Stainless Steel 304 ◽  
Different Types ◽  
Pin On Disc ◽  
Ss 304

This paper examines the relation between friction/wear and different types of steel materials under different normal loads and sliding velocities and to explore the possibility of adding controlled normal load and sliding velocity to a mechanical process. In order to do so, a pin on disc apparatus is designed and fabricated. Experiments are carried out when different types of disc materials such as stainless steel 304 (SS 304), stainless steel 316 (SS 316) and mild steel slide against stainless steel 304 (SS 304) pin. Variations of friction coefficient with the duration of rubbing at different normal loads and sliding velocities are investigated. Results show that friction coefficient varies with duration of rubbing, normal load and sliding velocity. In general, friction coefficient increases for a certain duration of rubbing and after that it remains constant for the rest of the experimental time. The obtained results reveal that friction coefficient decreases with the increase in normal load for all the tested materials. It is also found that friction coefficient increases with the increase in sliding velocity for all the materials investigated. Moreover, wear rate increases with the increase in normal load and sliding velocity. At identical operating condition, the magnitudes of friction coefficient and wear rate are different for different materials depending on sliding velocity and normal load.

Optimization of dry sliding wear parameters of recursive friction stir processed aluminium 7075 alloy

2020 ◽  
pp. 135065012094161
Author(s):  
G Girish ◽  
V Anandakrishnan
Keyword(s):  
Electron Microscopy ◽  
Wear Rate ◽  
Sliding Wear ◽  
Wear Testing ◽  
Wear Behaviour ◽  
Dry Sliding Wear ◽  
Dry Sliding ◽  
Sliding Velocity ◽  
Friction Stir ◽  
Sliding Distance

In this work, the dry sliding wear behaviour of recursively friction stir processed AA7075 was investigated using a pin-on-disc wear testing apparatus. The microstructure of the processed specimen was probed using optical microscopy, transmission electron microscopy and atomic force microscopy. Experiments were conducted using Taguchi experimental design by varying three different parameters like load, sliding velocity and sliding distance, and the analysis of variance was performed to identify the influence of the parameters over the wear rate. From the main effect plot, the combination of 9.81 N of load, 2 m/s of sliding velocity and a sliding distance of 2000 m was identified as the optimum levels that minimize the wear rate. The regression model was developed to calculate the wear rate, and the validation test was performed with the optimum parameter combination and compared with the experimental results. Wear tracks were examined using field-emission scanning electron microscopy to identify the type of wear mechanism.

Dry Sliding Wear Behavior of Cast A7075 and A7075/SAF 2205 Composite Material

2016 ◽  
Vol 35 (5) ◽  
pp. 487-492
Author(s):  
Ahmet Karaaslan ◽  
Alptekin Kısasöz ◽  
Ş. Hakan Atapek ◽  
Kerem Altuğ Güler
Keyword(s):  
Weight Loss ◽  
Composite Material ◽  
Friction Coefficient ◽  
Wear Rate ◽  
Wear Behavior ◽  
Dry Sliding Wear ◽  
Dry Sliding ◽  
Cast Material ◽  
Saf 2205 ◽  
Wear Tests

AbstractThe wear behavior of cast A7075 and A7075/SAF 2205 composite material fabricated by vacuum-assisted investment flask casting was investigated under dry sliding condition. The wear tests were carried out using a “ball-on-disc” type tribometer. In the wear tests, 100Cr6 and ZrO2 balls were used as counterparts and the load, total distance and rotating speed were selected as 10 N, 100 m and 100 rpm, respectively. The results were evaluated using the friction coefficient–distance diagram, weight loss and wear rate. All worn surfaces were examined by scanning electron microscope and wear characteristics of the materials were discussed as a function of the microstructural features. It was concluded that composite material had lower friction coefficient, less weight loss and slower wear rate than that of cast material.

Effects of Primary Si and Applied Load on the Dry Sliding Wear Behaviors of Hypereutectic Al-20Si Alloy

2014 ◽  
Vol 490-491 ◽  
pp. 83-87
Author(s):  
Qing Lin Li ◽  
Tian Dong Xia ◽  
Ye Feng Lan ◽  
Yi Sheng Jian
Keyword(s):  
Friction Coefficient ◽  
Wear Rate ◽  
Sliding Wear ◽  
Applied Load ◽  
Rate Increase ◽  
Treatment Temperature ◽  
Dry Sliding Wear ◽  
Dry Sliding ◽  
Wear Properties ◽  
Primary Si

The effects of the primary Si phase and applied load on the dry sliding wear behaviors of hypereutectic Al-20Si alloy were investigated. The results show that coarse polygonal and star-like primary Si was refined into fine blocky shape by increasing superheat treatment temperature. The friction coefficient and wear rate significantly decrease after decreasing the size and changing the morphology of primary Si. Moreover, the friction coefficient and wear rate increase with the increase of applied load. Therefore, the wear properties are greatly influenced by the parameters like morphology and size of primary Si as well as applied load.

A Study on Dry Sliding Wear Behaviour of Hybrid Metal Matrix Composites at Room Temperature

2015 ◽  
Vol 766-767 ◽  
pp. 219-228 ◽  
Author(s):  
N.G. Siddeshkumar ◽  
G.S. Shiva Shankar ◽  
S. Basavarajappa
Keyword(s):  
Wear Rate ◽  
Sliding Wear ◽  
Hybrid Composites ◽  
Base Material ◽  
Optical Microscope ◽  
Specific Wear Rate ◽  
Wear Behaviour ◽  
Dry Sliding Wear ◽  
Dry Sliding ◽  
Sliding Wear Behaviour

An attempt has been made to study the dry sliding wear behaviour of Aluminium based hybrid composites in room temperature.Al 2219 is used as base material with B4C and MoS2 as reinforcements. The hybrid composite were prepared by conventional stir casting technique. The dry sliding wear test were carried out for various parameters like sliding distance, applied load and sliding speed. The Optical Microscope and SEM results showed the presence of B4C and MoS2, which are fairly uniform and randomly dispersed on matrix material.XRD analysis, shown the presence of B4C and MoS2 phases in the prepared composites.The incorporation of reinforcement particles B4C and MoS2 reduces the specific wear rate of composites. The addition of MoS2 as a secondary reinforcement has significant effect on reducing specific wear rate of prepared composites. By using SEM worn surface of hybrid composites were studied.

Sign in / Sign up

Export Citation Format

Share Document