scholarly journals Optimizing Virtual Private Network Design Using a New Heuristic Optimization Method

2012 ◽  
Vol 2012 ◽  
pp. 1-9 ◽  
Author(s):  
Hongbing Lian ◽  
András Faragó

In virtual private network (VPN) design, the goal is to implement a logical overlay network on top of a given physical network. We model the traffic loss caused by blocking not only on isolated links, but also at the network level. A successful model that captures the considered network level phenomenon is the well-known reduced load approximation. We consider here the optimization problem of maximizing the carried traffic in the VPN. This is a hard optimization problem. To deal with it, we introduce a heuristic local search technique called landscape smoothing search (LSS). This study first describes the LSS heuristic. Then we introduce an improved version called fast landscape smoothing search (FLSS) method to overcome the slow search speed when the objective function calculation is very time consuming. We apply FLSS to VPN design optimization and compare with well-known optimization methods such as simulated annealing (SA) and genetic algorithm (GA). The FLSS achieves better results for this VPN design optimization problem than simulated annealing and genetic algorithm.

2015 ◽  
Vol 14 (1) ◽  
pp. 79
Author(s):  
G. V. Gonzales ◽  
E. D. Dos Santos ◽  
L. R. Emmendorfer ◽  
L. A. Isoldi ◽  
E. S. D. Estrada ◽  
...  

he problem study here is concerned with the geometrical evaluation of an isothermal Y-shaped cavity intruded into conducting solid wall with internal heat generation. The cavity acts as a sink of the heat generated into the solid. The main purpose here is to minimize the maximal excess of temperature (θmax) in the solid. Constructal Design, which is based on the objective and constraints principle, is employed to evaluate the geometries of Y-shaped cavity. Meanwhile, Simulated Annealing (SA) algorithm is employed as optimization method to seek for the best shapes. To validate the SA methodology, the results obtained with SA are compared with those achieved with Genetic Algorithm (GA) and Exaustive Search (ES) in recent studies of literature. The comparison between the optimization methods (SA, GA and ES) showed that Simulated Annealing is highly effective in the search for the optimal shapes of the studied case.


Author(s):  
Nataliya Gulayeva ◽  
Volodymyr Shylo ◽  
Mykola Glybovets

Introduction. As early as 1744, the great Leonhard Euler noted that nothing at all took place in the universe in which some rule of maximum or minimum did not appear [12]. Great many today’s scientific and engineering problems faced by humankind are of optimization nature. There exist many different methods developed to solve optimization problems, the number of these methods is estimated to be in the hundreds and continues to grow. A number of approaches to classify optimization methods based on various criteria (e.g. the type of optimization strategy or the type of solution obtained) are proposed, narrower classifications of methods solving specific types of optimization problems (e.g. combinatorial optimization problems or nonlinear programming problems) are also in use. Total number of known optimization method classes amounts to several hundreds. At the same time, methods falling into classes far from each other may often have many common properties and can be reduced to each other by rethinking certain characteristics. In view of the above, the pressing task of the modern science is to develop a general approach to classify optimization methods based on the disclosure of the involved search strategy basic principles, and to systematize existing optimization methods. The purpose is to show that genetic algorithms, usually classified as metaheuristic, population-based, simulation, etc., are inherently the stochastic numerical methods of direct search. Results. Alternative statements of optimization problem are given. An overview of existing classifications of optimization problems and basic methods to solve them is provided. The heart of optimization method classification into symbolic (analytical) and numerical ones is described. It is shown that a genetic algorithm scheme can be represented as a scheme of numerical method of direct search. A method to reduce a given optimization problem to a problem solvable by a genetic algorithm is described, and the class of problems that can be solved by genetic algorithms is outlined. Conclusions. Taking into account the existence of a great number of methods solving optimization problems and approaches to classify them it is necessary to work out a unified approach for optimization method classification and systematization. Reducing the class of genetic algorithms to numerical methods of direct search is the first step in this direction. Keywords: mathematical programming problem, unconstrained optimization problem, constrained optimization problem, multimodal optimization problem, numerical methods, genetic algorithms, metaheuristic algorithms.


Proceedings ◽  
2018 ◽  
Vol 2 (22) ◽  
pp. 1401
Author(s):  
Johannes Schmelcher ◽  
Max Kleine Büning ◽  
Kai Kreisköther ◽  
Dieter Gerling ◽  
Achim Kampker

Designing energy-efficient electric motor is a task where multiple goals have to be achieved at once. To find the best design possible, different approaches have been developed. In part one of this multipart paper, the characteristics of the design optimization problem and methods to solve them have been presented. Part two will deal with the different types of model descriptions and how the fundamental workflows look like. The third and last paper will evaluate the findings concerning the solution methods of the design optimization problem of electric motors. As a consequence, requirements for a new improved optimization method are deduced and presented.


2013 ◽  
Vol 756-759 ◽  
pp. 3466-3470
Author(s):  
Xu Min Song ◽  
Qi Lin

The trajcetory plan problem of spece reandezvous mission was studied in this paper using nolinear optimization method. The optimization model was built based on the Hills equations. And by analysis property of the design variables, a transform was put forward , which eliminated the equation and nonlinear constraints as well as decreaseing the problem dimensions. The optimization problem was solved using Adaptive Simulated Annealing (ASA) method, and the rendezvous trajectory was designed.The method was validated by simulation results.


2020 ◽  
Vol 142 (11) ◽  
Author(s):  
Yifan Tang ◽  
Teng Long ◽  
Renhe Shi ◽  
Yufei Wu ◽  
G. Gary Wang

Abstract To further reduce the computational expense of metamodel-based design optimization (MBDO), a novel sequential radial basis function (RBF)-based optimization method using virtual sample generation (SRBF-VSG) is proposed. Different from the conventional MBDO methods with pure expensive samples, SRBF-VSG employs the virtual sample generation mechanism to improve the optimization efficiency. In the proposed method, a least squares support vector machine (LS-SVM) classifier is trained based on expensive real samples considering the objective and constraint violation. The classifier is used to determine virtual points without evaluating any expensive simulations. The virtual samples are then generated by combining these virtual points and their Kriging responses. Expensive real samples and cheap virtual samples are used to refine the objective RBF metamodel for efficient space exploration. Several numerical benchmarks are tested to demonstrate the optimization capability of SRBF-VSG. The comparison results indicate that SRBF-VSG generally outperforms the competitive MBDO methods in terms of global convergence, efficiency, and robustness, which illustrates the effectiveness of virtual sample generation. Finally, SRBF-VSG is applied to an airfoil aerodynamic optimization problem and a small Earth observation satellite multidisciplinary design optimization problem to demonstrate its practicality for solving real-world optimization problems.


Author(s):  
Masataka Yoshimura ◽  
Masahiko Taniguchi ◽  
Kazuhiro Izui ◽  
Shinji Nishiwaki

This paper proposes a design optimization method for machine products that is based on the decomposition of performance characteristics, or alternatively, extraction of simpler characteristics, to accommodate the specific features or difficulties of a particular design problem. The optimization problem is expressed using hierarchical constructions of the decomposed and extracted characteristics and the optimizations are sequentially repeated, starting with groups of characteristics having conflicting characteristics at the lowest hierarchical level and proceeding to higher levels. The proposed method not only effectively enables achieving optimum design solutions, but also facilitates deeper insight into the design optimization results, and aids obtaining ideas for breakthroughs in the optimum solutions. An applied example is given to demonstrate the effectiveness of the proposed method.


2019 ◽  
Vol 9 (18) ◽  
pp. 3656 ◽  
Author(s):  
Marco Antonio Cruz-Chávez ◽  
Abelardo Rodríguez-León ◽  
Rafael Rivera-López ◽  
Martín H. Cruz-Rosales

This paper describes one grid-based genetic algorithm approach to solve the vehicle routing problem with time windows in one experimental cluster MiniGrid. Clusters used in this approach are located in two Mexican cities (Cuernavaca and Jiutepec, Morelos) securely communicating with each other since they are configured as one virtual private network, and its use as a single set of processors instead of isolated groups allows one to increase the computing power to solve complex tasks. The genetic algorithm splits the population of candidate solutions in several segments, which are simultaneously mutated in each process generated by the MiniGrid. These mutated segments are used to build a new population combining the results produced by each process. In this paper, the MiniGrid configuration scheme is described, and both the communication latency and the speedup behavior are discussed. Experimental results show one information exchange reduction through the MiniGrid clusters as well as an improved behavior of the evolutionary algorithm. A statistical analysis of these results suggests that our approach is better as a combinatorial optimization procedure as compared with other methods.


2015 ◽  
Vol 783 ◽  
pp. 83-94
Author(s):  
Alberto Borboni

In this work, the optimization problem is studied for a planar cam which rotates around its axis and moves a centered translating roller follower. The proposed optimization method is a genetic algorithm. The paper deals with different design problems: the minimization of the pressure angle, the maximization of the radius of curvature and the minimization of the contact pressure. Different types of motion laws are tested to found the most suitable for the computational optimization process.


2012 ◽  
Vol 2012 ◽  
pp. 1-16 ◽  
Author(s):  
Seungchul Lee ◽  
Jun Ni

This paper presents wafer sequencing problems considering perceived chamber conditions and maintenance activities in a single cluster tool through the simulation-based optimization method. We develop optimization methods which would lead to the best wafer release policy in the chamber tool to maximize the overall yield of the wafers in semiconductor manufacturing system. Since chamber degradation will jeopardize wafer yields, chamber maintenance is taken into account for the wafer sequence decision-making process. Furthermore, genetic algorithm is modified for solving the scheduling problems in this paper. As results, it has been shown that job scheduling has to be managed based on the chamber degradation condition and maintenance activities to maximize overall wafer yield.


2007 ◽  
Vol 561-565 ◽  
pp. 1869-1874
Author(s):  
Quan Lin Jin ◽  
Yan Shu Zhang

A hybrid global optimization method combining the Real-coded genetic algorithm and some classical local optimization methods is constructed and applied to develop a special program for parameter identification. Finally, the parameter identification for both 26Cr2Ni4MoV steel and AZ31D magnesium alloy is carried out by using the program. A comparison of deformation test and numerical simulation shows that the parameter identification and the obtained two sets of material parameters are all available.


Sign in / Sign up

Export Citation Format

Share Document