scholarly journals 3-Formylindole-4-aminobenzoic Acid: A Potential Corrosion Inhibitor for Mild Steel and Copper in Hydrochloric Acid Media

2012 ◽  
Vol 2012 ◽  
pp. 1-9 ◽  
Author(s):  
Aby Paul ◽  
Joby Thomas K. ◽  
Vinod P. Raphael ◽  
K. S. Shaju
Keyword(s):  
Mild Steel ◽  
Electrochemical Impedance ◽  
Aminobenzoic Acid ◽  
Acid Media ◽  
Langmuir Adsorption ◽  
Low Concentrations ◽  
Polarization Studies ◽  
Hydrochloric Acid Media ◽  
Hcl Medium ◽  
Mixed Type Inhibitor

The corrosion inhibition efficiencies of Schiff base 3-formylindole-4-aminobenzoic acid (3FI4ABA) on mild steel (MS) and copper in 1.0 M HCl solution have been investigated using weight loss measurements, electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization studies. The results show that inhibition efficiencies on both metals increase with increasing the concentration of the inhibitor. 3FI4ABA exhibited comparatively good inhibition towards mild steel in HCl medium even at low concentrations. The adsorption of inhibitor on the surfaces of the corroding metal mild steel and copper obeys the Langmuir isotherm. Polarization studies revealed that 3FI4ABA acts as a mixed-type inhibitor. Thermodynamic parameters (, ) were calculated using the Langmuir adsorption isotherm.

scholarly journals Inhibiting Effects of Rabeprazole Sulfide on the Corrosion of Mild Steel in Acidic Chloride Solution

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
M. K. Pavithra ◽  
T. V. Venkatesha ◽  
M. K. Punith Kumar
Keyword(s):  
Mild Steel ◽  
Electrochemical Impedance ◽  
Steel Corrosion ◽  
Protection Efficiency ◽  
Langmuir Adsorption ◽  
Kinetic And Thermodynamic Parameters ◽  
Mild Steel Corrosion ◽  
Acidic Chloride Solution ◽  
Acidic Chloride ◽  
Mixed Type Inhibitor

The corrosion inhibition effect of Rabeprazole sulfide (RS) on mild steel in 1 M hydrochloric acid (HCl) was investigated using weight loss, potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), and chronoamperometric measurements. Protection efficiency of RS increases with the concentration and decreases with the rise in temperature. Adsorption of RS on mild steel surface in 1 M HCl follows Langmuir adsorption isotherm. The kinetic and thermodynamic parameters governing the adsorption process were calculated and discussed. The polarization results suggest that RS performed as an excellent mixed-type inhibitor for mild steel corrosion in 1 M HCl.

scholarly journals Corrosion Inhibition of Mild Steel in Acid Solution by 3,4,5-Trimethoxyphenyl-2-imidazolines

2011 ◽  
Vol 8 (2) ◽  
pp. 671-679 ◽  
Author(s):  
D. Nalini ◽  
R. Rajalakshmi ◽  
S. Subhashini
Keyword(s):  
Mild Steel ◽  
Corrosion Inhibition ◽  
Mixed Mode ◽  
Anodic Polarization ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Langmuir Adsorption Isotherm ◽  
Sem Images ◽  
Acid Media ◽  
Langmuir Adsorption

A heterocyclic imidazoline, 3,4,5-trimethoxyphenyl-2-imidazolines (TMP2I) was tested for its corrosion inhibition in 0.5 M H2SO4and 1 M HCl using weight loss, Tafel polarisation and electrochemical impedance techniques. The results show that the inhibition efficiency increases with the increase in concentration of TMP2I and the higher efficiency of about 98% is obtained in both the acid media at 20 ppm. The adsorption of TMP2I obeys Langmuir adsorption isotherm and occurs spontaneously. Cathodic and anodic polarization curves of mild steel in the presence of different concentrations of TMP2I at 300C reveal that it is a mixed type of inhibitor. Electrochemical impedance studies reveal that the system follows mixed mode of inhibition. The surface morphology of the mild steel specimens was evaluated using SEM images

ANTI CORROSION ACTIVITY OF ETHYLENE TETRA PHOSPHONIC ACID–Cu2+ SYSTEM ON CARBON STEEL IN H2SO4 SOLUTION

2019 ◽  
Vol 27 (07) ◽  
pp. 1950180
Author(s):  
D. KAMELI ◽  
N. ALIOUANE ◽  
H. HAMMACHE-MAKHLOUFI ◽  
L. MAKHLOUFI
Keyword(s):  
Carbon Steel ◽  
Phosphonic Acid ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Protective Film ◽  
Corrosion Activity ◽  
Langmuir Adsorption ◽  
Carbon Steel Surface ◽  
Polarization Studies ◽  
Mixed Type Inhibitor

The anti-corrosion activity of a newly synthesized ethylene tetra phosphonic acid (ETPA), namely {Ethylenebis [(2-hydroxy-5,1,3-phenylene) bismethylene]} tetraphosphonic acid, against the corrosion of carbon steel in 0.5-M H2SO4 medium and its synergistic effect with Cu[Formula: see text] ions were studied using potentiodynamic polarizations and electrochemical impedance spectroscopy (EIS). Potentiodynamic polarization studies indicate that ETPA acts as a mixed-type inhibitor and inhibition efficiency increases with increasing ETPA concentration. The adsorption of ETPA at the surface of carbon steel follows Langmuir adsorption isotherm. EIS results demonstrated the adsorption of ETPA onto the carbon steel surface, leading to the formation of ETPA overlaying film. Addition of [Formula: see text] M Cu[Formula: see text], at low ETPA concentration ([Formula: see text] M), results in significant increase in inhibition efficiency (88%), superior to that obtained at high ETPA concentration (81% at [Formula: see text] M). SEM and EDAX analyses confirmed the existence of a uniform protective film on the electrode surface attributed to ETPA–Cu[Formula: see text] complex formation.

scholarly journals Evaluation of Corrosion Inhibition of Mild Steel in 1 M Hydrochloric Acid Solution byMollugo cerviana

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
P. Arockiasamy ◽  
X. Queen Rosary Sheela ◽  
G. Thenmozhi ◽  
M. Franco ◽  
J. Wilson Sahayaraj ◽  
...  
Keyword(s):  
Mild Steel ◽  
Corrosion Inhibition ◽  
Plant Extract ◽  
Potentiodynamic Polarization ◽  
Electrochemical Impedance ◽  
Langmuir Adsorption ◽  
Inhibition Concentration ◽  
Corrosion Inhibition Efficiency ◽  
Hcl Solution ◽  
Mixed Type Inhibitor

The inhibiting effect of methanolic extract ofMollugo cervianaplant on the corrosion of mild steel in 1 M HCl solution has been investigated by different techniques like potentiodynamic polarization, electrochemical impedance spectroscopy, and weight loss methods for five different concentrations of plant extract ranging from 25 to 1000 mg/L. The results indicated that the corrosion inhibition efficiency increased on increasing plant extract concentration till 500 mg/L and decreased on further increasing concentration. The extract was a mixed type inhibitor with the optimum inhibition concentration of 500 mg/L in potentiodynamic polarization. The adsorption of the plant extract on the mild steel surface was found to obey Langmuir adsorption isotherm. Surface analysis was also carried out to find out the surface morphology of the mild steel in the presence and in the absence of the inhibitor to find out its efficiency. The obtained results showed that theMollugo cervianaextract acts as a good inhibitor for the corrosion of mild steel in 1 M HCl solution.

scholarly journals Newly Synthesized N-Substituted Thiosemicarbazone as a Potential Corrosion Inhibitor for Mild Steel in 1 M HCl

2019 ◽  
Vol 7 (4.14) ◽  
pp. 168
Author(s):  
N Z. Nor Hashim ◽  
K Kassim ◽  
F H. Zaidon
Keyword(s):  
Mild Steel ◽  
Corrosion Inhibitor ◽  
Potentiodynamic Polarization ◽  
Corrosion Inhibitors ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Langmuir Adsorption ◽  
Before And After ◽  
Ft Ir ◽  
L1 And L2

Two N-substituted thiosemicarbazone derivatives namely as 2-(4-chlorobenzylidene)-N-phenylhydrazinecarbothioamide and 2-benzylidene-N-phenylhydrazinecarbothioamide (L1 and L2, respectively) have been tested as corrosion inhibitors on mild steel in 1 M HCl. The ligands were synthesized and investigated using potentiodynamic polarization (PD) and electrochemical impedance spectroscopy (EIS).  The obtained results indicated that inhibition efficiency, (IE, %) L1 increased with increasing inhibitor concentrations which behaved as a good corrosion inhibitor compared to L2. The synthesized ligands were successfully characterized by melting point, elemental analysis (C, H, N, and S), Fourier-transform infrared spectroscopy (FT-IR) and NMR (1H and 13C) spectroscopy. The excellent inhibition effectiveness for both compounds on mild steel before and after immersion in 1 M HCl solution containing 40 ppm of L1 and L2 were also verified by scanning electron microscope (SEM). Based on potentiodynamic polarization results, it can be concluded that all investigated compounds are mixed-type inhibitors and obey the Langmuir adsorption isotherm. 

Phenylcoumarin Glucoside as a Natural Inhibitor in the Protection of Low Carbon Steel Against Corrosion

MRS Advances ◽  
2017 ◽  
Vol 2 (62) ◽  
pp. 3909-3915
Author(s):  
Héctor M. Barbosa Cásarez ◽  
Araceli Espinoza Vázquez ◽  
Francisco J. Rodríguez-Gomez
Keyword(s):  
Carbon Steel ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Electrochemical Techniques ◽  
Low Carbon Steel ◽  
Steel Corrosion ◽  
Low Carbon ◽  
Low Concentrations ◽  
Natural Inhibitor ◽  
Polarization Studies

AbstractPhenylcoumarin glucoside (4-PC) is a compound extracted from the plant Hintona latiflora and was studied as inhibitor for AISI 1018 steel corrosion in 3% NaCl solution using potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) techniques, which may find application as eco-friendly corrosion inhibitors. The 4-PC provides inhibitor properties that protect AISI 1018 low carbon steel against corrosion at low concentrations (5 ppm) obtained by EIS. Polarization studies showed that the inhibitor was of mixed type. The inhibition efficiency by the two electrochemical techniques shows similar results. The inhibitor adsorption was demonstrated to be a combined process (physisorption and chemisorption) according to the Langmuir isotherm.

scholarly journals Inhibition Effect of Miconazole Nitrate on the Corrosion of Mild Steel in Hydrochloric Acid Medium

2011 ◽  
Vol 2011 ◽  
pp. 1-8 ◽  
Author(s):  
J. Ishwara Bhat ◽  
Vijaya D. P. Alva
Keyword(s):  
Hydrochloric Acid ◽  
Mild Steel ◽  
Acid Medium ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Inhibitor Molecule ◽  
Langmuir Adsorption ◽  
Hydrochloric Acid Medium ◽  
Miconazole Nitrate ◽  
Impedance Spectroscopy Technique

The corrosion inhibition of mild steel by miconazole nitrate, an antifungal drug has been investigated using potentiodynamic polarization, electrochemical impedance spectroscopy technique, and weight loss methods. The experimental results suggested miconazole nitrate is a good corrosion inhibitor for mild steel in 1 M hydrochloric acid medium. The inhibition efficiency increased with increase in inhibitor concentration. The thermodynamic parameters were determined and discussed. The inhibition was assumed to occur via adsorption of the inhibitor molecule on the surface of mild steel following Langmuir adsorption isotherm.

scholarly journals Corrosion Inhibition of Mild Steel in Acidic Media by N-[(3,4-Dimethoxyphenyl)Methyleneamino]-4-Hydroxy-Benzamide

2020 ◽  
Vol 7 (1) ◽  
Author(s):  
Kashmitha Muthamma ◽  
Preethi Kumari ◽  
M. Lavanya ◽  
Suma A. Rao
Keyword(s):  
Dft Calculations ◽  
Mild Steel ◽  
Corrosion Inhibition ◽  
Density Functional ◽  
Surface Characterization ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Corrosion Behaviour ◽  
Low Carbon ◽  
Acid Media

Abstract Mild steel (a low carbon steel) is an affordable engineering material used for many purposes in various environments including mild acidic environment with some precautions. The corrosion behaviour of mild steel (MS) in 0.5 M H2SO4 and 0.5 M HCl, in the temperature range (303–323 K) without and with the inhibitor N-[(3,4-dimethoxyphenyl) methyleneamino]-4-hydroxy-benzamide (DMHB), was investigated using Potentiodynamic polarization and Electrochemical impedance spectroscopy (EIS) techniques supplementing with surface characterization study using scanning electron microscope (SEM) and atomic force spectroscopy (AFM). Experimental observations were found to be in agreement with Density functional theory (DFT) calculations. The inhibition efficiency increases with increase in DMHB concentration and showed maximum inhibition efficiency of 86% in 0.5 M H2SO4 and 81% in 0.5 M HCl, respectively, at concentration of 3 × 10─3 M at 303 K. The inhibition efficiency of DMHB obtained relatively at its lower concentration (3 × 10─3 M) compared to other reported related compounds confirms its potential towards corrosion inhibition. The variation in the kinetic and thermodynamic parameters indicated physisorption of DMHB on MS and its mixed type inhibitive action followed Langmuir’s isotherm model. DFT calculations go along with the experimental results, signifying the potential corrosion inhibition behaviour of DMHB for MS in both the acid media.

Sign in / Sign up

Export Citation Format

Share Document