scholarly journals Effect of Plasma Surface Pretreatment on Ce3+-Doped GPTMS-ZrO2 Self-Healing Coatings on Aluminum Alloy

2012 ◽  
Vol 2012 ◽  
pp. 1-9 ◽  
Author(s):  
N. Kumar ◽  
A. Jyothirmayi ◽  
R. Subasri
Keyword(s):  
Aluminum Alloy ◽  
Corrosion Protection ◽  
Electrochemical Impedance ◽  
Condensation Reaction ◽  
Salt Spray ◽  
Neutral Salt ◽  
Self Healing ◽  
Surface Pretreatment ◽  
Plasma Surface ◽  
Coating Deposition

A hybrid sol synthesized from an acid-catalyzed hydrolysis and condensation reaction of 3-glycidoxypropyltrimethoxysilane (GPTMS) and zirconium n-propoxide was used as a matrix nanocomposite sol. To this sol, 0.01 M Ce3+ was added as an inhibitor to provide a self-healing coating system. The effect of an atmospheric air plasma surface pretreatment of aluminum alloy substrates prior to coating deposition of Ce3+-doped/undoped GPTMS-ZrO2 sol was studied with respect to corrosion protection. Coatings were generated by a dip coating technique employing a withdrawal speed of 5 mm/s and thermally cured at 130° C for 1 h. The coated Al surfaces were characterized using potentiodynamic polarization studies and electrochemical impedance spectroscopy. They were also subjected to accelerated corrosion testing using neutral salt spray test with 5% NaCl solution after creating an artificial scratch for more than 200 hours to assess the self-healing ability of coatings. It was observed that cerium (III) doping was effective for corrosion protection during long-term exposure to the electrolyte solution, and a plasma surface pretreatment of substrates prior to coating deposition of Ce3+-doped coatings improved the adhesion of coatings that provides enhanced corrosion protection along with self-healing ability exhibited in case of damages/scratches caused in the coating.

Corrosion Protection of Aluminum Alloy 2024-T3 by Vanadate Conversion Coatings

CORROSION ◽  
2004 ◽  
Vol 60 (3) ◽  
pp. 284-296 ◽  
Author(s):  
H. Guan ◽  
R. G. Buchheit
Keyword(s):  
Aluminum Alloy ◽  
Corrosion Protection ◽  
Inductively Coupled Plasma ◽  
Electrochemical Impedance ◽  
Salt Spray ◽  
Conversion Coating ◽  
Self Healing ◽  
Pitting Potential ◽  
X Ray ◽  
Aluminum Alloy 2024

Abstract In this paper, the formation, chemistry, morphology, and corrosion protection of a new type of inorganic conversion coating is described. This coating, referred to as a vanadate conversion coating (VCC), forms on aluminum alloy substrates in a matter of minutes during simple immersion in aqueous vanadate-based solutions at ambient temperatures. VCCs are yellow in color and conformal across the surface of aluminum alloy 2024-T3 (AA2024-T3 [UNS A92024]) substrates. Auger electron sputter depth profiles and x-ray absorption near-edge spectroscopy show that VCCs formed by a 3-min immersion are 300 nm to 500 nm thick and consist of a mixture of vanadium oxides and other components in the coating bath. In anodic polarization experiments conducted in aerated chloride solutions, VCCs increase the pitting potential and decrease the rate of oxygen reduction. When characterized by electrochemical impedance spectroscopy, VCCs demonstrate a low-frequency impedance between 1 MΩ-cm2 and 2 MΩ-cm2 after 24 h exposure to aerated 0.5 M sodium chloride (NaCl) solutions. In salt spray testing conducted according to ASTM B117, VCCs suppress formation of large pits for more than 168 h. VCCs also appear to be self-healing. Analysis of solution in contact with VCCs by inductively coupled plasma emission spectroscopy indicates that vanadate is released into solution upon exposure. Vanadium deposits were identified by x-ray microchemical analysis on a bare alloy substrate held in close proximity to a vanadate conversion-coated surface, and corrosion resistance of this bare surface was observed to increase during exposure. An important component of VCC formation appears to involve inorganic polymerization of V5+, which leads to the buildup of a film that passivates the surface and inhibits corrosion.

scholarly journals Design and Multidimensional Screening of Flash-PEO Coatings for Mg in Comparison to Commercial Chromium(VI) Conversion Coating

Metals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 337
Author(s):  
Ewa Wierzbicka ◽  
Marta Mohedano ◽  
Endzhe Matykina ◽  
Raul Arrabal
Keyword(s):  
Corrosion Resistance ◽  
Corrosion Protection ◽  
Electrochemical Impedance ◽  
Salt Spray ◽  
Conversion Coating ◽  
Neutral Salt ◽  
Chromium Vi ◽  
Alkaline Electrolytes ◽  
Az31b Alloy ◽  
Plasma Electrolytic

REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) regulations demand for an expedient discovery of a Cr(VI)-free alternative corrosion protection for light alloys even though the green alternatives might never be as cheap as current harmful technologies. In the present work, flash- plasma electrolytic oxidation coatings (FPEO) with the process duration < 90 s are developed on AZ31B alloy in varied mixtures of silicate-, phosphate-, aluminate-, and fluoride-based alkaline electrolytes implementing current density and voltage limits. The overall evaluation of the coatings’ anticorrosion performance (electrochemical impedance spectroscopy (EIS), neutral salt spray test (NSST), paintability) shows that from nine optimized FPEO recipes, two (based on phosphate, fluoride, and aluminate or silicate mixtures) are found to be an adequate substitute for commercially used Cr(VI)-based conversion coating (CCC). The FPEO coatings with the best corrosion resistance consume a very low amount of energy (~1 kW h m−2 µm−1). It is also found that the lower the energy consumption of the FPEO process, the better the corrosion resistance of the resultant coating. The superb corrosion protection and a solid environmentally friendly outlook of PEO-based corrosion protection technology may facilitate the economic justification for industrial end-users of the current-consuming process as a replacement of the electroless CCC process.

scholarly journals Application of Commercial Surface Pretreatments on the Formation of Cerium Conversion Coating (CeCC) over High-Strength Aluminum Alloys 2024-T3 and 7075-T6

Metals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 930
Author(s):  
Juan Jesús Alba-Galvín ◽  
Leandro González-Rovira ◽  
Francisco Javier Botana ◽  
Maria Lekka ◽  
Francesco Andreatta ◽  
...  
Keyword(s):  
Electrochemical Impedance ◽  
Salt Spray ◽  
Aluminum Matrix ◽  
Optical Emission ◽  
High Strength ◽  
Chemical Conversion ◽  
Conversion Coating ◽  
Neutral Salt ◽  
Corrosion Properties ◽  
Surface Pretreatment

The selection of appropriate surface pretreatments is one of the pending issues for the industrial application of cerium-based chemical conversion coatings (CeCC) as an alternative for toxic chromate conversion coating (CrCC). A two-step surface pretreatment based on commercial products has been successfully used here to obtain CeCC on AA2024-T3 and AA7075-T6. Specimens processed for 1 to 15 min in solutions containing CeCl3 and H2O2 have been studied by scanning electron microscopy coupled with energy-dispersive X-ray analysis (SEM-EDX), glow discharge optical emission spectroscopy (GDOES), potentiodynamic linear polarization (LP), electrochemical impedance spectroscopy (EIS), and neutral salt spray (NSS) tests. SEM-EDX showed that CeCC was firstly observed as deposits, followed by a general coverage of the surface with the formation of cracks where the coating was getting thicker. GDOES confirmed an increase of the CeCC thickness as the deposition proceed, the formation of CeCC over 7075 being faster than over 2024. There was a Ce-rich layer in both alloys and an aluminum oxide/hydroxide layer on 7075 between the upper Ce-rich layer and the aluminum matrix. According to LP and EIS, CeCC in all samples offered cathodic protection and comparable degradation in chloride-containing media. Finally, the NSS test corroborated the anti-corrosion properties of the CeCC obtained after the commercial pretreatments employed.

scholarly journals Enhancement of the cerium oxide primer layers deposited on AA2024-T3 aircraft alloy by preliminary Enhancement of the cerium oxide primer layers deposited on AA2024-T3 aircraft alloy by preliminary anodization

2018 ◽  
Author(s):  
Stephan V. Kozhukharov ◽  
Christian Girginov
Keyword(s):  
Cerium Oxide ◽  
Electrochemical Impedance ◽  
Protective Coatings ◽  
Salt Spray ◽  
Neutral Salt ◽  
Anodized Aluminum ◽  
Cross Sectional ◽  
Anodized Aluminum Oxide ◽  
Linear Voltammetry ◽  
And Performance

<p class="PaperAbstract"><span lang="EN-US">The possibility for combination between Anodized Aluminum Oxide (AAO) and Cerium Oxide Primer Layer (CeOPL) for elaboration of efficient protective coatings for AA2024-T3 aircraft alloy is proposed in the present research. The combined AAO/CeOPL coating characterizations include Electrochemical Impedance Spectroscopy (EIS) combined with Linear Voltammetry (LVA), for extended times (until 2520 hours) to a model corrosive medium (3.5% NaCl). Topographical and cross-sectional (SEM and EDX) observations were performed in order to determine the AAO/CeOPL film thickness and composition. The AAO/CeOPL layer durability tests were confirmed by standard Neutral Salt Spray (NSS). The data analysis from all the used measurement methods has undoubtedly shown that the presence of AAO film significantly improves the cerium oxide primer layer (CeOPL) protective properties and performance. </span></p>

scholarly journals Preparation and Properties of Self-Healing and Self-Lubricating Epoxy Coatings with Polyurethane Microcapsules Containing Bifunctional Linseed Oil

Polymers ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 1578 ◽  
Author(s):  
Haijuan Yang ◽  
Qiufeng Mo ◽  
Weizhou Li ◽  
Fengmei Gu
Keyword(s):  
Interfacial Polymerization ◽  
Electrochemical Impedance ◽  
Linseed Oil ◽  
Salt Spray ◽  
Average Diameter ◽  
Organic Coating ◽  
Epoxy Coating ◽  
The Self ◽  
Self Healing ◽  
Pure Epoxy

An organic coating is commonly used to protect metal from corrosion, but it is prone to failure due to microcracks generated by internal stress and external mechanical action. The self-healing and self-lubricating achieved in the coating is novel, which allows an extension of life by providing resistance to damage and repair after damage. In this study, a new approach to microencapsulating bifunctional linseed oil with polyurethane shell by interfacial polymerization. Moreover, the self-healing and self-lubricating coatings with different concentrations of microcapsules were developed. The well-dispersed microcapsules showed a regular spherical morphology with an average diameter of ~64.9 μm and a core content of 74.0 wt.%. The results of the salt spray test demonstrated that coatings containing microcapsules still possess anticorrosion, which is improved with the increase of microcapsules content, after being scratched. The results of electrochemical impedance spectroscopy showed a |Z|f=0.01Hz value of 104 Ω·cm2 for pure epoxy coating after being immersed for 3 days, whereas the coating with 20 wt.% microcapsules was the highest, 1010 Ω·cm2. The results of friction wear showed that the tribological performance of the coating was enhanced greatly as microcapsule concentration reached 10 wt.% or more, which showed a 86.8% or more reduction in the friction coefficient compared to the pure epoxy coating. These results indicated that the coatings containing microcapsules exhibited excellent self-healing and self-lubricating properties, which are positively correlated with microcapsules content.

scholarly journals ESTUDIO DE LA RESISTENCIA A LA CORROSION DEL ALUMINIO 6063 ANODIZADO

2017 ◽  
Vol 22 (2) ◽  
pp. 17
Author(s):  
Karín Paucar Cuba ◽  
Hugo Rojas Flores ◽  
Abel Vergara Sotomayor
Keyword(s):  
Corrosion Resistance ◽  
Aluminum Alloy ◽  
Sulfuric Acid ◽  
Electrochemical Impedance ◽  
Salt Spray ◽  
Aluminum Surface ◽  
Equivalent Circuits ◽  
Acid Salt ◽  
Mass Losses ◽  
Palabras Clave

El estudio de la resistencia a la corrosión del anodizado de una aleación de aluminio (AA6063) en ácido sulfúrico a diferentes tiempos de anodizado: 30, 45 y 60 min. se realizó usando la espectroscopia de impedancia electroquímica (EIE) y el ensayo de niebla salina ácida. (ASTM B287). Los datos obtenidos por EIE y su correlación con los circuitos equivalentes más apropiados permitieron determinar los parámetros asociados a la capa porosa y a la capa barrera del óxido protector formado sobre la superficie del aluminio en estudio. La exposición de las muestras anodizadas durante 250h a una niebla salina ácida permitió observar variaciones en su masa. De los resultados obtenidos por EIE y las pérdidas de masa de las muestras anodizadas se estableció que la película de anodizado de 45 minutos mostró una mayor resistencia a la corrosión en comparación con la obtenida a 60 y 30 min., respectivamente. Palabras clave.- Aluminio, Anodizado, Impedancia electroquímica, Niebla salina ácida. ABSTRACTThe study of the corrosion resistance of anodized on aluminum alloy (AA6063) in sulfuric acid to different times: 30, 45 and 60 min. was performed using electrochemical impedance spectroscopy (EIS) and the acid salt spray test (ASTM B287). The EIS’data and its correlation with the most appropriate equivalent circuits allowed to determine the parameters associated with the porous layer and the oxide layer protective barrier formed on the aluminum surface under study. Exposure of the samples anodized for a 250h salt spray acid allowed to observe changes in their mass. From the results obtained by EIS and the mass losses of the anodized samples was established that the anodized film of 45 minutes showed higher corrosion resistance compared to that obtained at 60 and 30 min, respectively. Keywords.- Aluminum, Anodized, Electrochemical impedance, Acid salt spray.

The study of the effectiveness of corrosion protection of zinc-rich coating on the base of water sodium silicate

2020 ◽  
Vol 25 (4) ◽  
Keyword(s):  
Corrosion Protection ◽  
Sodium Silicate ◽  
Electrochemical Impedance ◽  
Paint Film ◽  
Salt Spray ◽  
Salt Spray Test ◽  
Test Method ◽  
Liquid Sodium ◽  
Research Station ◽  
Marine Research

The study is examines the assessment of the corrosion-protective properties of zinc-rich coating based on water sodium silicate (ZRC) using the Electrochemical Impedance Spectra (EIS) with AutoLAB PGSTAT204N. The system consists of three electrodes: Ag/AgCl reference electrode in 3 M solution of KCl, auxiliary electrode – Pt (8x8 mm) and working electrodes for determination potential (Ecorr) and impedance measurement, salt spray test method and natural teszzt method at Dam Bay Marine Research Station, Nha Trang, Khanh Hoa, Viet Nam. ZSC can provide good cathodic protection when zinc content is 70% by weight or more. ZSC with a mixing ratio of High Modulus Liquid Sodium Glass / Zinc Powde : 25/75 by weight (working title – TTL-VN) has good corrosion protection after 16 cycles salt spray test and after 18 months natural test in seawater. The paint film has basic parameters as adhesion – 4,41 MPa, flexural strength – 2 mm, pendulum hardness – 0,62 conventional units and initial coating potentia l – 0,96 V Ag/AgCl.

Corrosion resistance of composite coating used for fastener protection

2019 ◽  
Vol 66 (5) ◽  
pp. 595-602
Author(s):  
Zhifeng Lin ◽  
Likun Xu ◽  
Xiangbo Li ◽  
Li Wang ◽  
Weimin Guo ◽  
...  
Keyword(s):  
Corrosion Resistance ◽  
Carbon Steel ◽  
Composite Coating ◽  
Marine Environment ◽  
Electrochemical Impedance ◽  
Salt Spray ◽  
Diffusion Method ◽  
Economic Losses ◽  
Neutral Salt ◽  
Content Type

Purpose The purpose of this paper is to examine the performance of a fastener composite coating system, sherardized (SD) coating/zinc-aluminum (ZA) coating whether it has good performance in marine environment. Design/methodology/approach In this paper, SD coating was fabricated on fastener surface by solid-diffusion method. ZA coating was fabricated by thermal sintering method. Corrosion behaviours of the composite coating were investigated with potentiodynamic polarization curves, open circuit potential and electrochemical impedance spectroscopy methods. Findings Neutral salt spray (NSS) and deep sea exposure tests revealed that the composite coating had excellent corrosion resistance. Polarization curve tests showed that corrosion current density of the sample with composite coating was significantly decreased, indicating an effective corrosion protection of the composite coating. OCP measurement of the sample in NaCl solution demonstrated that the composite coating had the best cathodic protection effect. The good corrosion resistance of the composite coating was obtained by the synergy of SD and ZA coating. Practical implications SD/ZA coating can be used in marine environment to prolong the life of carbon steel fastener. Social implications SD/ZA composite coating can reduce the risk and accident caused by failed fastener, avoid huge economic losses. Originality/value A new kind of composite coating was explored to protect the carbon steel fastener in marine environment. And the composite coating has the long-term anti-corrosion performance both in simulated and marine environment test.

Optimizing maleic anhydride microcapsules size for use in self-healing epoxy-based coatings for corrosion protection of aluminum alloy

2018 ◽  
Vol 69 (9) ◽  
pp. 1257-1267 ◽  
Author(s):  
Chigoziri N. Njoku ◽  
Innocent O. Arukalam ◽  
Weichen Bai ◽  
Ying Li
Keyword(s):  
Aluminum Alloy ◽  
Maleic Anhydride ◽  
Corrosion Protection ◽  
Self Healing

scholarly journals Acrylate-Based Hybrid Sol-Gel Coating for Corrosion Protection of AA7075-T6 in Aircraft Applications: The Effect of Copolymerization Time

Polymers ◽  
2020 ◽  
Vol 12 (4) ◽  
pp. 948 ◽  
Author(s):  
Peter Rodič ◽  
Romana Cerc Korošec ◽  
Barbara Kapun ◽  
Alenka Mertelj ◽  
Ingrid Milošev
Keyword(s):  
Corrosion Protection ◽  
Electrochemical Impedance ◽  
Condensation Reaction ◽  
Energy Dispersive Spectrometer ◽  
Sol Gel ◽  
Gel Permeation Chromatography ◽  
Corrosion Attack ◽  
Scanning Calorimetry ◽  
Corrosion Properties ◽  
Pressure Differential Scanning Calorimetry

Pre-hydrolysed/condensed tetraethyl orthosilicate (TEOS) was added to a solution of methyl methacrylate (MMA) and 3-methacryloxypropyltrimethoxysilane (MAPTMS), and then copolymerised for various times to study the influence of the latter on the structure of hybrid sol-gel coatings as corrosion protection of aluminium alloy 7075-T6. The reactions taking place during preparation were characterised using real-time Fourier transform infrared spectroscopy, dynamic light scattering and gel permeation chromatography. The solution characteristics were evaluated, using viscosimetry, followed by measurements of thermal stability determined by thermogravimetric analysis. The optimal temperature for the condensation reaction was determined with the help of high-pressure differential scanning calorimetry. Once deposited on 7075-T6 substrates, the coatings were evaluated using a field emission scanning electron microscope coupled to an energy dispersive spectrometer to determine surface morphology, topography, composition and coating thickness. Corrosion properties were tested in dilute Harrison’s solution (3.5 g/L (NH4)2SO4 and 0.5 g/L NaCl) using electrochemical impedance spectroscopy. The copolymerization of MMA and MAPTMS over 4 h was optimal for obtaining 1.4 µm thick coating with superior barrier protection against corrosion attack (|Z10 mHz| ~ 1 GΩ cm2) during three months of exposure to the corrosive medium.

Sign in / Sign up

Export Citation Format

Share Document