scholarly journals Effects of Hybrid Polypropylene-Steel Fiber Addition on Some Hardened Properties of Lightweight Concrete with Pumice Breccia Aggregate

2012 ◽  
Vol 2012 ◽  
pp. 1-8 ◽  
Author(s):  
Slamet Widodo ◽  
Iman Satyarno ◽  
Sri Tudjono
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Modulus Of Elasticity ◽  
Steel Fiber ◽  
Lightweight Concrete ◽  
Splitting Tensile Strength ◽  
Modulus Of Rupture ◽  
Hybrid Fiber ◽  
Hardened Properties ◽  
Fiber Addition

Lightweight concrete application in construction field is growing rapidly in these recent years due to its advantages over ordinary concrete. In this paper, pumice breccia which can be found abundantly in Indonesia is proposed to be utilized as the coarse aggregate. In spite of its benefits, lightweight concrete exhibits more brittle characteristics and lower tensile strength compared with normal concrete. On the other hand, fiber addition into concrete has become widely used to improve its tensile properties. Furthermore, the utilization of hybrid fiber in a suitable combination may potentially improve the mechanical properties of concrete. This paper experimentally examines the effects of hybrid polypropylene-steel fiber addition on some hardened properties of pumice breccia aggregate lightweight concrete. Five groups of test specimens with fixed volume fraction of polypropylene fiber combined with different amounts of steel fiber were added in concrete to investigate the density, compressive strength, modulus of elasticity, splitting tensile strength, and the modulus of rupture of the concrete mixtures. Test results indicate that hybrid fiber addition leads to significant improvement to the compressive strength, modulus of elasticity, splitting tensile strength, and the modulus of rupture of the pumice breccia lightweight aggregate concrete and meet the specification for structural purposes.

Experimental Study on Axial Tensile Strength of Low Volume Fraction of Ternary Hybrid Fiber Reinforced Concrete

2014 ◽  
Vol 906 ◽  
pp. 329-334
Author(s):  
Yu Ting Zhu ◽  
Dong Tao Xia ◽  
Bo Ru Zhou
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Steel Fiber ◽  
Polypropylene Fiber ◽  
Strength Test ◽  
Splitting Tensile Strength ◽  
National Standard ◽  
Fiber Reinforced ◽  
Hybrid Fiber ◽  
Advantages And Disadvantages

In this paper, according to the national standard and testing methods,the direct tension strength,splitting tensile strength and cubic compressive strength test were carried out for 8 different groups of hybrid fiber (containing steel fiber, macro-polypropylene fiber and dura fiber) reinforced HPC specimens.The results showed that when the volume proportion of ternary hybrid fiber was less than 1%, there was not obvious influence for the concrete compressive strength, but the splitting tensile strength increased by 26% ~ 69%; the ratio between splitting tensile strength and compressive strength for HFRC increased to 1/12~1/9. When added 0.7% steel fiber, 0.19% macro-polypropylene fiber and 0.11% dura fiber, the confounding effect was the best. Based on the advantages and disadvantages of tensile splitting strength and direct tensile strength test and the results of tests, the concept of equivalent tensile strength and calculative formula was put forward .

scholarly journals EFFECT OF USING SLURRY INFILTRATED FIBER CONCRETE ON THE BEHAVIOR OF REINFORCED CONCRETE CORBELS

2021 ◽  
Vol 25 (Special) ◽  
pp. 4-69-4-77
Author(s):  
Hajer K. Alqaraghouly ◽  
◽  
Nibras N. Abdul-Hameed ◽  
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Reinforced Concrete ◽  
Failure Mode ◽  
Modulus Of Elasticity ◽  
Steel Fiber ◽  
Modulus Of Rupture ◽  
Vertical Load ◽  
Fiber Volume ◽  
Fiber Concrete

This paper experimentally presents the behavior and strength of slurry infiltrated fiber concrete (SIFCON) corbels. The program included 3 specimens in which steel fiber volume fractions were varied (6,8, and 10) %. All specimens had a constant shear span to depth ratio (a/d=0.7) and were of the same width, length, and thickness. The corbel specimens were examined under the effect of concentrated vertical load only. It was found that the compressive strength, splitting tensile strength, modulus of rupture, modulus of elasticity, and failure mode were improved with the increase in steel fiber content for all SIFCON corbels.

scholarly journals PERFORMANCE OF HIGH STRENGTH LIGHTWEIGHT CONCRETE USING PALM WASTES

2018 ◽  
Vol 19 (2) ◽  
pp. 30-42
Author(s):  
Md. Nazmul Huda ◽  
Mohd Zamin Jumaat ◽  
A. B. M. Saiful Islam ◽  
Walid A. Al-Kutti
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Modulus Of Elasticity ◽  
Coarse Aggregate ◽  
Lightweight Concrete ◽  
High Strength ◽  
Splitting Tensile Strength ◽  
Palm Shell

The performance of high strength structural lightweight concrete (LWC) using the palm wastes, oil palm shell (OPS) as well as palm oil clinker (POC) has been reported. Existing literatures used either OPS or POC individually for production of LWC. Each concept has their own advantages-disadvantages. In this study, both OPS and POC have been put together as coarse aggregate on the way to see the improvement of mechanical properties of waste based LWC. To achieve this purpose, regular coarse aggregate has been fully replaced by OPS and POC in the concrete. This structural grade lightweight concrete is named as palm shell and clinker concrete (PSCC). Attempts have been made with the series of OPS and POC mixture aimed at identifying for better performance. The quantity of OPS and POC mix has been varied as 30%, 40%, 50%, 60% and 70%. Mechanical properties of PSCC like density, workability, compressive strength at different ages, flexural strength, splitting tensile strength as well as modulus of elasticity have been evaluated. It is revealed that the proposed PSCC has extensive potential in terms of high compressive strength and good material behavior to perform as a better LWC. The study could offer structural lightweight concrete of compressive strength up to 46 MPa that is 31% higher than the control mix. The usage of 50% OPS to 50% POC coarse aggregate by vol. in the concrete mix is found to be the optimum mix. Furthermore, simple correlations have been developed which can easily predict compressive strength, splitting tensile strength, flexural strength, modulus of elasticity and ultrasonic pulse velocity of lightweight concrete.

scholarly journals Mechanical Behavior of Steel Fiber-Reinforced Lightweight Concrete Exposed to High Temperatures

2020 ◽  
Vol 11 (1) ◽  
pp. 116
Author(s):  
Huailiang Wang ◽  
Min Wei ◽  
Yuhui Wu ◽  
Jianling Huang ◽  
Huihua Chen ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
High Temperatures ◽  
Steel Fiber ◽  
Lightweight Concrete ◽  
Splitting Tensile Strength ◽  
Steel Fibers ◽  
Peak Strain ◽  
Stress Strain ◽  
Axial Compressive Strength

The mechanical characteristics of steel fiber-reinforced lightweight concrete (SFLWC) under high temperatures are studied in this paper. Different concrete matrices, including all-lightweight concrete (ALWC) and semi-lightweight concrete (SLWC), and different steel fibers with hooked ends and crimped shapes are considered as objects. In addition, normal-weight limestone aggregates concrete (NWC), no-fiber ALWC, and SLWC were tested after high-temperature treatment as a control group. The temperature effects on the splitting tensile strength, ultrasonic pulse velocity, compressive stress–strain curve, elastic module, peak strain, and axial compressive strength of the SFLWC were investigated. The results showed that, with increasing exposure temperature, both the axial compressive strength and the elastic modulus decreased, while the axial peak strain has a certain increase, and hence the stress–strain curves were gradually flattened. The toughness of all the concretes increased first and then reduced with increasing temperature, while the specific toughness of all the concretes increased with the increase in temperature. Compared with NWC and SLWC, ALWC had a better capacity to resist high temperatures, especially temperatures > 400 °C. Adding steel fibers can improve the capacity of energy absorption, specific toughness, and residual splitting tensile strength of lightweight concrete (LWC) before and after it is exposed to high temperatures. Based on a regression analysis, a segmented constitutive equation for LWC and SFLWC under uniaxial compression was derived from fitting the experimental findings, and the fitting curve agrees well with the test results.

scholarly journals Sunflower Stalks versus Corn Cobs as Raw Materials for Sustainable Concrete

Materials ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 5078
Author(s):  
Cătălina Mihaela Grădinaru ◽  
Adrian Alexandru Șerbănoiu ◽  
Bogdan Vasile Șerbănoiu
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Modulus Of Elasticity ◽  
Lightweight Concrete ◽  
Raw Materials ◽  
Splitting Tensile Strength ◽  
Freeze Thaw ◽  
Corn Cobs ◽  
Sunflower Stalks ◽  
Mineral Aggregates

Concrete, the most common material in the building industry, involves the use of mineral aggregates that represent an exhaustible resource, despite their large availability. For a series of applications, these mineral aggregates can be replaced by vegetal ones, which represent an easy renewable natural resource. In this study, two types of vegetal raw materials, namely sunflower stalks and corn cobs, were used in developing 10 compositions of ecological microconcrete, with different percentages involved: 20%, 35%, 50%, 65% and 80%; they were analyzed from the perspectives of density, compressive strength, splitting tensile strength, resistance to repeated freeze-thaw cycles, modulus of elasticity and thermal conductivity. The results revealed that the microconcretes with sunflower stalks registered slightly higher densities and better results regarding the compressive strength, splitting tensile strength, modulus of elasticity, and freeze-thaw resistance than those with corn cobs. Lightweight concrete is obtained when more than 50% replacement rates of the mineral aggregates are used.

scholarly journals Behavior of high performance artificial lightweight aggregate concrete reinforced with hybrid fibers

2018 ◽  
Vol 162 ◽  
pp. 02001
Author(s):  
Wasan Khalil ◽  
Hisham Ahmed ◽  
Zainab Hussein
Keyword(s):  
Tensile Strength ◽  
Aspect Ratio ◽  
Steel Fiber ◽  
Fiber Type ◽  
Lightweight Aggregate ◽  
Plain Concrete ◽  
Splitting Tensile Strength ◽  
Lightweight Aggregate Concrete ◽  
Fiber Reinforced ◽  
Hybrid Fiber

In this investigation, sustainable High Performance Lightweight Aggregate Concrete (HPLWAC) containing artificial aggregate as coarse lightweight aggregate (LWA) and reinforced with mono fiber, double and triple hybrid fibers in different types and aspect ratios were produced. High performance artificial lightweight aggregate concrete mix with compressive strength of 47 MPa, oven dry density of 1828 kg/m3 at 28 days was prepared. The Fibers used included, macro hooked steel fiber with aspect ratio of 60 (type S1), macro crimped plastic fiber (P) with aspect ratio of 63, micro steel fiber with aspect ratio of 65 (type S), and micro polypropylene fiber (PP) with aspect ratio of 667. Four HPLWAC mixes were prepared including, one plain concrete mix (without fiber), one mono fiber reinforced concrete mixes (reinforced with plastic fiber with 0.75% volume fraction), one double hybrid fiber reinforced concrete mixes (0.5% plastic fiber + 0.25% steel fiber type S), and a mix with triple hybrid fiber (0.25% steel fiber type S1+ 0.25% polypropylene fiber + 0.25% steel fiber type S). Fresh (workability and fresh density) and hardened concrete properties (oven dry density, compressive strength, ultrasonic pulse velocity, splitting tensile strength, flexural strength, static modules of elasticity, thermal conductively, and water absorption) were studied. Generally, mono and hybrid (double and triple) fiber reinforced HPLWAC specimens give a significant increase in splitting tensile strength and flexural strength compared with plain HPLWAC specimens. The percentage increases in splitting tensile strength for specimens with mono plastic fiber are, 20.8%, 31.9%, 36.4% and 41%, while the percentage increases in flexure strength are 19.5%, 37%, 33.9% and 34.2% at 7, 28, 60, 90 days age respectively relative to the plain concrete. The maximum splitting tensile and flexure strengths were recorded for triple hybrid fiber reinforced HPLWAC specimens. The percentage increases in splitting tensile strength for triple hybrid fiber reinforced specimens are 19.5%, 37%, 33.9% and 34.2%, while the percentage increases in flexure strength are 50.5%, 62.4. %, 66.8% and 62.2% at 7, 28, 60 and 90 days age respectively relative to the plain concrete specimens.

Mechanical Properties of Fiber Reinforced Lightweight Aggregate Concrete

2011 ◽  
Vol 477 ◽  
pp. 274-279 ◽  
Author(s):  
Yi Xu ◽  
Lin Hua Jiang ◽  
Hong Qiang Chu ◽  
Lei Chen
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Water Hyacinth ◽  
Steel Fiber ◽  
Polypropylene Fiber ◽  
Lightweight Aggregate ◽  
Splitting Tensile Strength ◽  
Lightweight Aggregate Concrete ◽  
Fiber Types

In this study, the effects of fiber types on the mechanical properties of lightweight aggregate concretes were investigated. Three types of fibers, namely, polypropylene fiber, steel fiber and water hyacinth (Eichhornia crassipes) fiber, and two types of lightweight aggregates, namely, expanded polystyrene and ceramsite were used. The compressive strength and splitting tensile strength of concretes were tested. The results show that both the compressive strength and the splitting tensile strength were improved by adding a reasonable volume of steel fiber and polypropylene fiber into LWAC. The addition of water hyacinth fiber had little effect on the compressive strength of LWAC, while a little increase was observed in the splitting tensile strength.

Influence the Carbonation Resistance and Mechanical Properties of Shotcrete by Accelerated Carbonation Test

2014 ◽  
Vol 1065-1069 ◽  
pp. 1985-1989
Author(s):  
Jia Bin Wang ◽  
Di Tao Niu ◽  
Rui Ma ◽  
Ze Long Mi
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Steel Fiber ◽  
Splitting Tensile Strength ◽  
Construction Technology ◽  
Accelerated Carbonation ◽  
Carbonation Depth ◽  
Normal Concrete ◽  
Carbonation Resistance

In order to investigate the carbonation resistance of shotcrete and the mechanical properties after carbonation, the accelerated carbonation test was carried out. The results indicate that the carbonation resistance of shotcrete is superior to that of normal concrete. With the increasing of carbonation depth, compressive strength and splitting tensile strength of shotcrete grew rapidly. The admixing of steel fiber can further improve the carbonation resistance, reduce the carbonation rate, and increase the splitting tensile strength of shotcrete greatly. Besides, based on analyzing the effects of construction technology and steel fiber of concrete for the carbonation resistance, a carbonation depth model for shotcrete was established. Key words: shotcrete; carbonation; steel fiber; mechanical properties

Development of High Performance Concrete Containing Admixture in Nuclear Power Plants

2013 ◽  
Vol 357-360 ◽  
pp. 1062-1065 ◽  
Author(s):  
Jeong Eun Kim ◽  
Wan Shin Park ◽  
Song Hui Yun ◽  
Do Gyeum Kim ◽  
Jea Myoung Noh
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Blast Furnace ◽  
Fly Ash ◽  
Silica Fume ◽  
Modulus Of Elasticity ◽  
Blast Furnace Slag ◽  
High Performance ◽  
Splitting Tensile Strength ◽  
Furnace Slag

This paper presents the results of an experimental study on the compressive strength, splitting tensile strength and modulus of elasticity characteristics of high performance concrete. These tests were carried out to evaluate the mechanical properties of HPC for up to 7 and 28 days. Mixtures were prepared with water to binder ratio of 0.40. Two mixtures were containing fly ash at 25%, silica fume at 5% cement replacement, respectively. Another mixture was contains blast furnace slag and fly ash at 25%. Three standard 100¥a200 cylinder specimens were prepared. HPC showed improvement in the compressive strength and splitting tensile strength when ordinary Portland cement was replaced with silica fume. Compare with specimens FA25 and BS25FA25, specimen SF5 showed much more modulus of elasticity. It shows that the use of the blast furnace slag of 25% and fly ash of 25% cement replacement has caused a small increase in compressive strength and splitting tensile strength and modulus of elasticity compared to the only use of fly ash of 25% at 28days. The results indicated that the use of blast furnace slag or silica fume provided the good performance compare to fly ash when the mechanical properties of the high performance concretes were taken into account.

Fracture Mechanical Properties of Rocks and Mortar/Rock Interfaces

1994 ◽  
Vol 370 ◽  
Author(s):  
Manouchehr Hassanzadeh
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Fracture Energy ◽  
Modulus Of Elasticity ◽  
Splitting Tensile Strength ◽  
Coarse Grained ◽  
Interfacial Zone ◽  
Test Results

AbstractThis study has determined the fracture mechanical properties of 9 types of rock, namely fine-, medium- and coarse-grained granites, gneiss, quartzite, diabase, gabbro, and fine- and coarse-grained limestones. Test results show among other things that quartzite has the highest compressive strength and fracture energy, while diabase has the highest splitting tensile strength and modulus of elasticity. Furthermore, the strength and fracture energy of the interfacial zone between the rocks and 6 different mortars have been determined. The results showed that, in this investigation, the mortar/rock interfaces are in most cases weaker than both mortars and rocks.

Sign in / Sign up

Export Citation Format

Share Document