scholarly journals Micromagnetic Simulation of Spin Transfer Torque Magnetization Precession Phase Diagram in a Spin-Valve Nanopillar under External Magnetic Fields

2012 ◽  
Vol 2012 ◽  
pp. 1-12 ◽  
Author(s):  
H. B. Huang ◽  
X. Q. Ma ◽  
Z. H. Liu ◽  
X. M. Shi ◽  
T. Yue ◽  
...  

We investigated spin transfer torque magnetization precession in a nanoscale pillar spin-valve under external magnetic fields using micromagnetic simulation. The phase diagram of the magnetization precession is calculated and categorized into four states according to their characteristics. Of the four states, the precessional state has two different modes: steady precession mode and substeady precession mode. The different modes originate from the dynamic balance between the spin transfer torque and the Gilbert damping torque. Furthermore, we reported the behavior of the temporal evolutions of magnetization components in steady precession mode at the condition of the applied magnetic field using the orbit projection method and explaining perfectly the magnetization components evolution behavior. In addition, a result of a nonuniform magnetization distribution is observed in the free layer due to the excitation of non-uniform mode.

SPIN ◽  
2017 ◽  
Vol 07 (03) ◽  
pp. 1740014 ◽  
Author(s):  
Cormac Ó Coileáin ◽  
Han Chun Wu

From historical obscurity, antiferromagnets are recently enjoying revived interest, as antiferromagnetic (AFM) materials may allow the continued reduction in size of spintronic devices. They have the benefit of being insensitive to parasitic external magnetic fields, while displaying high read/write speeds, and thus poised to become an integral part of the next generation of logical devices and memory. They are currently employed to preserve the magnetoresistive qualities of some ferromagnetic based giant or tunnel magnetoresistance systems. However, the question remains how the magnetic states of an antiferromagnet can be efficiently manipulated and detected. Here, we reflect on AFM materials for their use in spintronics, in particular, newly recognized antiferromagnet Mn2Au with its in-plane anisotropy and tetragonal structure and high Néel temperature. These attributes make it one of the most promising candidates for AFM spintronics thus far with the possibility of architectures freed from the need for ferromagnetic (FM) elements. Here, we discuss its potential for use in ferromagnet-free spintronic devices.


2018 ◽  
Vol 97 (2) ◽  
Author(s):  
Shizhu Qiao ◽  
Shishen Yan ◽  
Shishou Kang ◽  
Qiang Li ◽  
Yufeng Qin ◽  
...  

SPIN ◽  
2015 ◽  
Vol 05 (01) ◽  
pp. 1550003 ◽  
Author(s):  
Weiwei Zhu ◽  
Zongzhi Zhang ◽  
Jianwei Zhang ◽  
Yaowen Liu

In this paper, spin-dependent multiple reflection effect on spin-transfer torque (STT) has been theoretically and numerically studied in a spin valve nanopillar with a single or dual spin-polarizer. By using a scattering matrix method, we formulate an analytical expression of STT that contains the multiple interfacial reflection effect. It is found that the multiple reflections could enhance the STT efficiency and reduce the critical switching current. The STT efficiency depends on the spin polarization of both the free layer and polarizer. In the nanopillars with a dual spin polarizer, the multiple reflections would cause an asymmetric frequency dependence on the applied current, albeit exactly the same parameters are used in all three ferromagnetic layers, indicating that the frequency in the negative current varies much faster than that in the positive case.


SPIN ◽  
2020 ◽  
Vol 10 (02) ◽  
pp. 2050012
Author(s):  
H. Bhoomeeswaran ◽  
P. Sabareesan

The current-driven magnetization precession dynamics stimulated by Spin-Transfer Torque (STT) in a trilayer spin-valve device (typically Spin-Torque Nanooscillator (STNO)) is numerically investigated by solving the Landau–Lifshitz–Gilbert–Slonczewski (LLGS) equation. We have devised four STNO devices made of ferromagnetic alloys such as CoPt, CoFeB, Fe[Formula: see text]B[Formula: see text]Ni2 and EuO, which act as free and fixed layers. Here, copper acts as a nonmagnetic spacer for all the devices. In this work, we have introduced the current-induced Oersted field, which is generated when a spin-polarized current passes through the device. The generated Oersted field strength is varied by increasing the diameter of the STNO device. Frequency tunability is achieved in all the four devices, whereas the power of the individual device reduces. The frequency and power of the devices depend entirely on the saturation magnetization of the material, which inherently reflects in the current density and the coherence of the spin-polarized DC. In all devices, the frequency increases, whereas the power decreases by increasing the strength of the Oersted field. Among the four devices, the maximum frequency can be tuned up to 104[Formula: see text]GHz with 40[Formula: see text]nm device diameter, which is obtained for EuO material. This opens a promising source and paves a glittering future for the nanoscale spintronic devices.


2007 ◽  
Vol 7 (1) ◽  
pp. 344-349
Author(s):  
Hoang Yen Thi Nguyen ◽  
Sung-Jung Joo ◽  
Kuyoul Jung ◽  
Kyung-Ho Shin

Current induced magnetic reversal due to spin transfer torque is a promising candidate in advanced information storage technology. It has been intensively studied. This work reports the field-dependence of switching-currents for current induced magnetization switching in a uncoupled nano-sized cobalt-based spin valve of exchange biased type. The dependency is investigated in hysteretic regime at room temperature, in comparison with that of a trilayer simple spin valve. In the simple spin valve, the switching currents behave to the positive and the negative applied magnetic field symmetrically. In the exchange biased type, in contrast, the switching currents respond to the negative field in a quite unusual and different manner than to the positive field. A negative magnetic field then can shift the switching-currents into either negative or positive current range, dependently on whether a parallel or an antiparallel state of the spin valve was produced by that field. This different character of switching currents in the negative field range can be explained by the effect of the exchange bias pinning field on the spin-polarizer (the fixed Co layer) of the exchange biased spin valve. That unidirectional pinning filed could suppress the thermal magnetization fluctuation in the spin-polarizer, leading to a higher spin polarization of the current, and hence a lower switching current density than in the simple spin valve.


2008 ◽  
Vol 103 (7) ◽  
pp. 07A718 ◽  
Author(s):  
J. Guo ◽  
M. B. A. Jalil ◽  
S. G. Tan

2007 ◽  
Vol 40 (5) ◽  
pp. 1261-1267 ◽  
Author(s):  
K Ito ◽  
T Devolder ◽  
C Chappert ◽  
M J Carey ◽  
J A Katine

Sign in / Sign up

Export Citation Format

Share Document