scholarly journals Effects of Inoculation by Bradyrhizobium japonicum Strains on Nodulation, Nitrogen Fixation, and Yield of Soybean (Glycine max L. Merill) Varieties on Nitisols of Bako, Western Ethiopia

ISRN Agronomy ◽  
2012 ◽  
Vol 2012 ◽  
pp. 1-8 ◽  
Author(s):  
Tamiru Solomon ◽  
Lalit Mohan Pant ◽  
Tsige Angaw
Keyword(s):  
Field Experiment ◽  
Total Nitrogen ◽  
Seed Yield ◽  
Nitrogen Uptake ◽  
Bradyrhizobium Japonicum ◽  
Seed Weight ◽  
Dry Weight ◽  
Plant Seed ◽  
Main Effect ◽  
Thousand Seed Weight

A field experiment was conducted during the 2005/6 growing season to assess the effect of Bradyrhizobium japonicum strains on the performance of soybean varieties. The field experiment was conducted at Bako ATVET College, West Shoa, Ethiopia. Three varieties of soybean (Jalele, Cheri, and Ethio-Yugoslavia) and two strains of Bradyrhizobium japonicum (TAL 378 and TAL 379) along with one uninoculated treatment were laid out in a randomized complete block design with nine variety and strain combinations and three replications. Inoculated and uninoculated seeds of soybean were planted on prepared beds. All the nodulation parameters, namely, nodulation rating, nodule number per plant, nodule volume per plant, and nodule dry weight were significantly influenced by the main effect of Bradyrhizobium japonicum strains alone. The main effect of soybean variety did not affect these parameters significantly. The dry matter production and nitrogen uptake at midflowering were highly significantly () affected by the main effects of both variety and strain. The yield and the yield components such as number of pods per plant, number of seeds per pod, seed yield, thousand seed weight, above-ground dry biomass, and total nitrogen uptake were highly significantly () affected by inoculation of Bradyrhizobium strains alone. A yield increase of 53.2% was obtained due to inoculation of TAL 379 over the uninoculated control. The variety effect was also significant () on number of pods per plant, seed yield, thousand seed weight, harvest index, and total nitrogen uptake. Variety and Bradyrhizobium strain interaction was detected on number of nodules per plant and nodule dry weight.

Influence of Seed Inoculation with Commercial Bacterial Inoculants (Bradyrhizobium Japonicum) on Growth and Yield of Soybean

2019 ◽  
Author(s):  
W Jarecki ◽  
D Bobrecka Jamro
Keyword(s):  
Field Experiment ◽  
Seed Yield ◽  
Bradyrhizobium Japonicum ◽  
Seed Weight ◽  
Dry Weight ◽  
Growth And Yield ◽  
Plant Analysis ◽  
Area Index ◽  
Bacterial Inoculants ◽  
Seed Inoculation

A field experiment was carried out with three bacterial inoculants: HiStick® Soy, Nitragina, Nitrazon and the control. Number and dry weight of nodules were significantly higher with inoculation of bacterial inoculants compared to the control. In 2017, the most pods per plant were obtained after the use of Nitrazon or HiStick® Soy, while in 2018, after the use of HiStick® Soy or Nitragina. In 2018, the highest 1000 seed weight was obtained after the use of Nitragina. In 2017, the seed yield was the most favourably affected by the inoculants HiStick®Soy (3.31 t ha-1) and Nitrazon (3.37 t ha-1) and in 2018, by HiStick® Soy (3.92 t ha-1) and Nitragina (3.87 t ha-1). High Soil Plant Analysis Development (SPAD) and Leaf Area Index (LAI) readings, were observed with HiStick® Soy.

scholarly journals Effects of seed rates and row spacing on yield and yield components of linseed (Linum usitatissimum L) at Dabat district of North Gondar Zone, Ethiopia

2020 ◽  
Vol 7 (1) ◽  
pp. 1-5
Author(s):  
Daniel Tadesse ◽  
Yenus Ousman ◽  
Mequanint Teshome
Keyword(s):  
Seed Yield ◽  
Yield Components ◽  
Seed Weight ◽  
Row Spacing ◽  
Seeding Rate ◽  
Seed Rate ◽  
Main Effect ◽  
Yield And Yield Components ◽  
Poor Seed ◽  
Thousand Seed Weight

The area coverage and productivity of linseed decreased from time to time; even there is no crop package and recommended row spacing and seed rate at regional level due to lack of attention by researchers and also by farmers. In Ethiopia, linseed has been cultivated for two primary purposes, seed and oil use. Its production in Ethiopia country is characterized by low input, low yield and poor product quality mainly due to attitude and poor management practices such as lack of proper weed management system, poor seed and field hygiene, poor seed bed preparation, inadequate plant nutrition, inappropriate seeding rate and spacing (mostly broad casting), improper threshing ground and improper cleaning. Field experiment was carried out to evaluate the effects of seed rate and row spacing on the yield and yield components of linseed, during 2017/2018 cropping season at Dabat district, North Western Ethiopia. KULUMSA1 (CHILALO) was used as test crop. Factorial combinations of three row spacing, (20, 25, and 30 cm) and three seed rates, (40, 45 and 50kgs) were laid out in RCBD with three replications.  Data regarding different parameters were recorded from days to sowing up to different stages. Statistical analysis of data showed that most of the parameters were affected by the main effects of Seed Rates and Row spacing. The main effect of seed rate was highly significant for days maturity, thousand seed weight and harvest index of linseed. More over it was significant for days to flower and number of capsule per plant, but it was not significant to plant height and bio mass yield. The main effect of row spacing was significant for days to maturity. The interaction of seed rate and row spacing was highly significance (p<0.05) for number of primarily branch per plant and seed yield. It was not significant on number of seeds per capsule, number of capsule per plant and thousand seed weight. The main finding of this research is highest seed yield (1771 kg ha-1 ) was obtained at 40kg ha-1 x 25 cm of row spacing while the lowest seed yield (752kg ha-1) was recorded at 50 kg ha-1 x 30 cm. 40kg ha-1 and 25cm is recommended to increase yield of linseed and its components. In conclusion the effect of seed rate and row spacing affects the important yield components of linseed.

scholarly journals The effectiveness of herbicidal desiccants and application times on seed yield and earliness of soybean

2020 ◽  
Vol 48 (3) ◽  
pp. 1465-1472
Author(s):  
Nurgül ERGİN ◽  
Mehmet D. KAYA
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Seed Weight ◽  
Control Plant ◽  
First Year ◽  
Growth Stages ◽  
Plant Seed ◽  
Group Iii ◽  
Yield And Quality ◽  
Thousand Seed Weight

Two herbicidal desiccants and five application times at different reproductive stages of soybean were investigated for earliness without significant reduction in seed yield and quality. Glyphosate and diquat were applied to soybean cv. ‘Arısoy’ (maturity group III) at growth stages of R5, R6, R7 and R8. Full maturity (FM) and uprooted plants at each growth stage were also used as a control. Plant height, first pod height, pod number per plant, seed weight per plant, thousand seed weight, seed yield and oil ratio were investigated. The results showed that plant height was not affected by desiccants and application times. Lower seed weight per plant, thousand seed weight, seed yield, and oil ratio were obtained from earlier reproductive stages, especially at R5, and R6, but glyphosate produced higher seed yield and oil content than diquat. Both desiccants considerably reduced seed yield when applied at R5 and R6. Mean seed yield enhanced from 1,364 to 3,036 kg ha-1 in first year and from 1,097 to 2,804 kg ha-1 in second year as the growth stages extended from R5 to R8. Diquat was more effective desiccant for accelerating soybean harvest than glyphosate, while higher seed yield was obtained from glyphosate spraying at R5 and R6 stages. Increased seed yield was observed in diquat application when the soybean growth stages were delayed from R5 to R8. It was concluded that glyphosate should be applied at R7 in soybean for earliness with 7-10 days in harvest and no desiccant should be suggested before R7 stages.

Is the flag leaf important in perennial ryegrass seed production?

2010 ◽  
Vol 14 ◽  
pp. 67-73
Author(s):  
J.A.K. Trethewey ◽  
M.P. Rolston
Keyword(s):  
Seed Yield ◽  
Perennial Ryegrass ◽  
Yield Components ◽  
Seed Weight ◽  
Photosynthetic Capacity ◽  
Flag Leaf ◽  
Active Radiation ◽  
Seed Yield Components ◽  
Seed Fill ◽  
Thousand Seed Weight

In cereals, the importance of the flag leaf for contributing carbohydrate during seed fill is well documented. However, in ryegrass this relationship is not so clear. This paper reports on an investigation of the effect on seed yield components of reduced photosynthetic capacity to the flag leaf, stem and head of perennial ryegrass (Lolium perenne). The hypothesis was that reduced photosynthetic capacity of the flag leaf does not affect seed yield components in perennial ryegrass. Following flowering, photosynthetic capacity was reduced by defoliation or shading the flag leaf, stem, or head of individual tillers. Seed yield components were measured at harvest. Reduced photosynthetically active radiation (PAR) to the flag leaf and stem did not affect thousand seed weight or seed yield when compared with control plants whereas reducing PAR to the head had a significant effect. The seed head itself may be more important than the flag leaf during seed fill, but when the seed head is shaded substantial re-mobilisation of stored carbohydrates can occur. Keywords: flag leaf, green leaf area, Lolium perenne, photosynthetically active radiation, seed fill, seed yield, thousand seed weight, water-soluble carbohydrates

scholarly journals Effect of flooding on growth and yield of mungbean genotypes

2016 ◽  
Vol 41 (1) ◽  
pp. 151-162 ◽  
Author(s):  
MR Amin ◽  
MA Karim ◽  
MR Islam ◽  
S Aktar ◽  
MA Hossain
Keyword(s):  
Field Experiment ◽  
Seed Size ◽  
Seed Yield ◽  
Field Conditions ◽  
Growth And Yield ◽  
Yield Reduction ◽  
Plant Seed ◽  
Days To Flowering ◽  
Soil Flooding ◽  
Standing Water

The field experiment was carried out with some selected mungbean genotypes viz. IPSA-13, VC-6173A, BU mug 2, BARI Mung-5 and IPSA-12 to observe the effect of 4-days flooding on their growth and yield of mungbean under field conditions at Bangabandhu Sheikh Mujibur Rahman Agricultural University, Gazipur, Bangladesh during September to November, 2011 maintaining 3-5 cm standing water at 24 days after emergence. Days to flowering and maturity delayed in flooded plants over control depending on the genotypes. Flooding significantly reduced Total Day Matters (TDM), number of pods per plant, seed size and seed yield of the mungbean genotypes over control. Considering higher seed yield, larger seed size and less yield reduction relative to control VC-6173A, BU mug 2 and IPSA-13 were found tolerant to soil flooding condition.Bangladesh J. Agril. Res. 41(1): 151-162, March 2016

scholarly journals Determination of the Optimum Rate of N Fertilizers with Addition of Goat Manure for Production of Cowpea (Vigna unguiculata [L.] Walp)

2019 ◽  
Vol 6 (02) ◽  
pp. 121-128
Author(s):  
Devi Liana ◽  
Heni Purnamawati ◽  
Maya Melati ◽  
Yudiwanti Wahyu
Keyword(s):  
Vigna Unguiculata ◽  
Seed Weight ◽  
Block Design ◽  
Dry Weight ◽  
N Fertilizer ◽  
Plant Seed ◽  
Optimum Rate ◽  
Randomized Block Design ◽  
Goat Manure ◽  
100 Seed Weight

Cowpea (Vigna unguiculata L. Walp) is one of the potential substitutes of soybean due to its similar nutritional content. This study aims to determine the optimum rate of N fertilizer for the production of cowpea, and to determine the effects of the interaction between N fertilizer rates and goat manure application on cowpea production. The experiment was organized in a split-plot with a complete randomized block design with three replications. The main plot was goat manure, i.e. 0 and 5 tons.ha-1; the sub-plot was nitrogen fertilizer with five rates (0, 50, 100, 150, and 200% of the recommended rate), i.e. 0, 22.5, 45, 67.5, and 90 kg N.ha-1. Application of N fertilizer reduced the 100-seed weight and slightly reduced cowpea yield and yield components. Application of goat manure increased seed dry weight per plant, number of pods per plant, dry pod weight per plant, seed dry weight per m2, productivity, 100-seed weight, and the harvest index. There was no significant interaction between goat manure and different rates of nitrogen in affecting cowpea growth.

scholarly journals Yield and Yield Attributing Parameters of Toria (Brassica campestries) under Real Time Rainfall Situation in an Inceptisols of Assam, India

2020 ◽  
pp. 311-321
Author(s):  
R. Borah ◽  
N. Baruah ◽  
P. K. Sarma ◽  
R. Borah ◽  
A. Sonowal ◽  
...  
Keyword(s):  
Field Experiment ◽  
Real Time ◽  
Seed Yield ◽  
Seed Weight ◽  
Growth Yield ◽  
Rabi Season ◽  
Higher Plant ◽  
College Of Agriculture ◽  
Sowing Dates ◽  
Stover Yield

A field experiment was conducted during rabi season of 2018-19 and 2019-20 in Dryland experimental field belong to soil order Inceptisols, Biswanath college of Agriculture, Assam Agricultural University, Biswanath chariali, Assam to study the ‘‘Yield and yield attributing parameters of toria (Brassica campestries) under real time rainfall situation in an Inceptisols of Assam, India’’ under AICRPDA, NICRA. The treatments consisting of 4 different dates of sowing i.e. S1-41th SMW, S2-44th SMW, S3-46th SMW, and S4- 48th SMW, & three variety i.e. V1-JT-90-1(Jeuti), V2-Yellow sarson (Benoy) and V3- TS-38. Growth, yield and yield attributing characters of toria varieties were influenced by different dates of sowing. S1 registered higher plant height (43.2 cm, 92.9 cm and 106.6 cm & 40.2 cm, 89.8 cm and 101.5 cm) and number of branch (3.8, 5.3 and 7.2 & 3.4, 5.1 and 6.9) at 30 DAS, 45 DAS and 60 DAS, respectively, during 2018-19 and 2019-20. Yield attributing characters like number of siliqua, number of seed per siliqua, 1000 seed weight (g) were gradually decreased with advancement of sowing dates. Among the three varieties V1 (Jeuti) recorded highest seed yield (8.9 q ha-1 and 8.1 q ha-1) and stover yield (23.4 q ha-1 and 22.2 q ha-1) in 2018-19 and 2019-20, respectively. Highest HI (28.5% and 25.8%) was recorded in S1 and lowest was recorded in S4 (20.7% and 14.6%).

scholarly journals Estimation of heterosis for yield-related traits for single cross and three-way cross hybrids of oilseed rape (Brassica napus L.)

Euphytica ◽  
2019 ◽  
Vol 215 (10) ◽  
Author(s):  
Joanna Wolko ◽  
Agnieszka Dobrzycka ◽  
Jan Bocianowski ◽  
Iwona Bartkowiak-Broda
Keyword(s):  
Brassica Napus ◽  
Oilseed Rape ◽  
Seed Yield ◽  
Seed Weight ◽  
Single Cross ◽  
Positive Heterosis ◽  
Silique Length ◽  
Thousand Seed Weight ◽  
Number Of Seeds ◽  
Number Of Branches

Abstract Rapeseed breeding programs are focused mainly on improving plant potential and seed yield. One of the ways to improve seed yield in oilseed rape is heterosis, which is hybrid vigor that results in a greater biomass, increased seed yield, and faster development. The purpose of this study was to estimate yield-related trait heterosis for single cross and three-way cross hybrids of winter oilseed rape (Brassica napus L.). A population of 60 doubled-haploid (DH) lines and two generations of hybrids were evaluated in field trials to assess six yield-related traits: plant height, number of branches per plant, number of siliques per plant, silique length, number of seeds per silique, and thousand seed weight. Heterosis effects for each trait were estimated by a comparison of the particular hybrid with: (1) the trait mean over both parents—mid-parent heterosis and (2) to the value of better parent—best-parent heterosis. Traits with clear positive heterosis and traits with varied heterosis were observed in this study. For the first group, we include plant height, silique length, and the number of seeds per silique—a large number of hybrids expressed significant positive heterosis for these traits, independent from the year of observations and the type of hybrid. For the second group, with varied heterosis, we can include the number of branches and siliques per plant and thousand seed weight. For these traits, hybrids exhibited both positive and negative significant heterosis, without a clear pattern for the years and types of hybrids.

Association among genetic parameters in Indian mustard (Brassica juncea L. Czern and Coss.)

2018 ◽  
Vol 3 (01) ◽  
pp. 11-15
Author(s):  
Vipin Kumar Malik ◽  
Shiv Kumar Singh ◽  
Vijay Kumar ◽  
Norang Pal Singh ◽  
Ankit Malik ◽  
...  
Keyword(s):  
Brassica Juncea ◽  
Seed Yield ◽  
Seed Weight ◽  
Harvest Index ◽  
Indian Mustard ◽  
Flowering Plant ◽  
Genetic Advance ◽  
Gene Effects ◽  
Plant Seed ◽  
Biological Yield

The considerable amount of genetic variability on the basis of GCV and PCV estimates for the traits; days to 50% flowering, numbers of primary and secondary branches per plant, length of siliqua, 1000-seed weight, seed yield per plant, biological yield per plant and harvest index were found in thirty five genotypes of Indian mustard (Brassica juncea L. Czern and Coss). Heritability and genetic advance were higher for days to 50% flowering, plant height and biological yield per plant. Although, number of secondary branches per plant, seed yield per plant and harvest index had moderately high heritability with moderate genetic advance indicating additive gene effects and selection pressure could be applied on them for yield improvement leads to fast genetic improvement of the materials. Days to 75% maturity, length of siliqua, 1000-seed weight and oil content had low heritability indicating that these traits were under the influence of environmental factors and selection on the basis of these traits could not be effective.

The optimum foliar zinc source and level for improving Zn content in seed of chickpea

2015 ◽  
Vol 38 (6) ◽  
Author(s):  
Nihal Kayan ◽  
Nurdilek Gulmezoglu ◽  
Mehmet Demir Kaya
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Yield Components ◽  
Seed Weight ◽  
Harvest Index ◽  
Foliar Application ◽  
Seed Number ◽  
Plant Seed ◽  
Zn Content ◽  
Pod Number

The comparative effect of 0, 0.2, 0.4, 0.6 and 0.8% Zn levels of zinc chelate (Zn-EDTA; 8% Zn) and zinc sulfate (23% Zn) applied as foliar sprays for assuaging zinc deficiency of chickpea cv. Gökçe was evaluated under field condition. The sprays were applied on the plants before blooming stage during 2012 and 2013 growing seasons and seed yield, yield components like plant height, pod number per plant, seed number per plant, hundred seed weight, harvest index and mineral concentrations (nitrogen, phosphorus, zinc and iron) in seeds were investigated. Plant height, pod number per plant, seed number per plant, hundred seed weight, harvest index and seed yield were investigated. The results showed that increased zinc doses caused an increase in Zn content of seed, while seed yield was not affected similarly. In general, plant height, pod number and seed number per plant increased by the application of zinc. Lower dose of Zn-EDTA and higher dose of ZnSO<sub>4</sub> gave higher yield components. Seed weight, harvest index and seed yield were not significantly influenced by Zn sources and doses; however, mineral concentration of seeds enhanced when Zn doses were increased. It was concluded that foliar application of zinc resulted in an increase in seed mineral contents rather than seed yield of chickpea. The dose of 0.6% with Zn-EDTA was the optimum combination for Zn enrichment in seed of chickpea.

Sign in / Sign up

Export Citation Format

Share Document