scholarly journals Marginal Sealing Durability of Two Contemporary Self-Etch Adhesives

2012 ◽  
Vol 2012 ◽  
pp. 1-8 ◽  
Author(s):  
Maryam Khoroushi ◽  
Mahsa Mansoori
Keyword(s):  
Composite Resin ◽  
Water Storage ◽  
Dye Penetration ◽  
Marginal Integrity ◽  
One Step ◽  
Composite Resin Restorations ◽  
Self Etch ◽  
Resin Restorations

Introduction. Sealing abilities of two self-etch adhesives were evaluated after two aging processes: storage in water and thermocycling. Materials and Methods. Cl V cavities were prepared on the buccal and lingual aspects of 48 human premolars, with cervical margins 1 mm below the CEJ. Clearfil Protect Bond (CPB) and BeautiBond (BB) (two-step and one-step self-etch adhesives, resp.) were applied, each to half of the cavities and restored with composite resin. Each group was randomly subdivided into 4 subgroups (n=12) and evaluated for dye penetration after 24 hours, after 3000 thermocycling rounds, after a 6-month water storage, and after 3000 thermocycling rounds plus 6-month water storage, respectively. Data was analyzed using SPSS 11.5 and Kruskal-Wallis and Mann-Whitney U tests (α=0.05). Results. There were no significant differences in enamel and dentin microleakage between the adhesives (P=0.683; P=0.154). Furthermore, no significant differences were observed in enamel microleakage of each one of CPB and BB (P=0.061 and P=0.318, resp.). However, significant decrease was observed in subgroups 3 and 4 (P=0.001) for CPB dentinal margins. Conclusion. In this study, limited aging procedures had no influence on marginal integrity of composite resin restorations bonded with self-etch adhesives of CPB and BB. Furthermore, CPB dentinal sealing improved after aging.

scholarly journals Influence of light intensity and curing cycle on microleakage of Class V composite resin restorations

2005 ◽  
Vol 13 (2) ◽  
pp. 193-197 ◽  
Author(s):  
Maria Jacinta M. Coelho Santos ◽  
Mário Honorato da Silva e Souza Júnior ◽  
Gildo Coelho Santos Júnior ◽  
Omar El-Mowafy ◽  
Ana Paula Chedid Cavalcanti ◽  
...  
Keyword(s):  
Composite Resin ◽  
Step Cycle ◽  
Class V ◽  
Dye Penetration ◽  
Group I ◽  
Light Curing ◽  
Composite Resin Restorations ◽  
Qth Light ◽  
Curing Cycle ◽  
Resin Restorations

The aim of this study was to determine the effect of a softstart polymerization method from Quartz-Tungsten-Halogen (QTH) and Plasma Arc (PAC) curing units on microleakage of Class V composite resin restorations with dentin cavosurface margins. Seventy-five bovine incisors received standardized class V cavities in all dentin margins. Teeth were divided into 5 equal groups according to the curing cycle. The cavities were incrementally restored with a composite resin (Single Bond/Z-100, 3M). Light curing was applied as follows: Group I: PAC light continuous-cycle curing at 1600 mW/cm² for 3s; Group II: PAC light step-cycle curing (2s at 800 mW/cm² then 4s at 1600 mW/cm²); Group III: QTH light continuous-cycle curing at 400 mW/cm² for 40s; Group IV: QTH light ramp-cycle curing (from 100 to 600 mW/cm² in 15s followed by 25s at 600 mW/cm²); Group V: QTH light pulse-delay curing (200 mW/cm² for 3s followed by 3 min delay then 600 mW/cm² for 30s). Teeth were stored in distilled water at 37ºC for 30 days and then subjected to thermocycling for 500 cycles at 5 and 55ºC. Root apices were sealed and teeth coated with nail varnish before they were immersed in 0.5% fuchsine red dye solution. Teeth were then sectioned and slices were scanned with a computer scanner to determine the area of dye leakage using a computer program (Image Tools). Images of tooth slices were also visually examined under magnification and dye penetration along the tooth/restoration interface was scored. Significant differences in the degree of dye penetration and leakage were detected between groups (p<.05). Groups I and II had significantly higher values of dye penetration and leakage than groups III, IV and V. In conclusion, the use of PAC light curing in a continuous or step cycle modes resulted in increased microleakage of Class V resin composite restorations compared with medium intensity QTH light curing. Pulse, ramp and continuous-cycle curing modes with QTH light resulted in similar degrees of microleakage.

scholarly journals Clinical performance of class I occlusal composite resin restorations: a multicenter double-blinded randomized clinical trial

2018 ◽  
Vol 21 (3) ◽  
pp. 288
Author(s):  
Bruno Mendonça Lucena De Veras ◽  
Geórgia Pires dos Santos Menezes ◽  
Hugo Leonardo Mendes Barros ◽  
Marcelya Chrystian Moura Rocha ◽  
Aditonio De Carvalho Monteiro ◽  
...  
Keyword(s):  
Clinical Trial ◽  
Composite Resin ◽  
Clinical Performance ◽  
Dental Restoration ◽  
Composite Resins ◽  
Class I ◽  
Color Match ◽  
Marginal Integrity ◽  
Composite Resin Restorations ◽  
Resin Restorations

<p><strong>Objective: </strong>The objective of this study was to evaluate the 6-month clinical performance of class I occlusal composite resin restorations through a multicenter, randomized, double-blind, clinical trial. <strong>Material e Métodos: </strong>Two hundred and eighty class I occlusal restorations were performed in 70 patients (aged between 17 to 50 years).  The restorations were divided into four groups: G1 (Filtek P60/3M ESPE); G2 (Rok/SDI); G3 (Filtek™ P90/3M ESPE); G4 (Evolux/Dentsply). Two pre-calibrated dental practitioners performed and evaluated the restorative procedures regarding to color match, marginal discoloration, recurrent caries, wear (anatomic form) and marginal integrity according to the USPHS criteria. <strong>Resultados: </strong>In 85.8% of the evaluated restorations was observed the ideal score (A) for color match; 91.4% for marginal discoloration; 100% for recurrent caries; 87.7% for wear (anatomic form) and 99.3% for marginal integrity.<strong> Conclusion: </strong>The composite resins used in this study presented satisfactory and similar clinical performance in a 6-month clinical evaluation.</p><p><strong>Keywords</strong></p><p>Dentistry; Composite resins; Permanent dental restoration; Molar; Bicuspid.</p>

scholarly journals Effect of Cavity Disinfection with Chlorhexidine on Marginal Gap of Class V Composite Restorations Bonded with a Universal Adhesive Using Self-Etch and Etch-and-Rinse Bonding Strategy

2020 ◽  
Author(s):  
Soodabeh Kimyai ◽  
Narmin Mohammadi ◽  
Mahmoud Bahari ◽  
Elahe Pesyanian ◽  
Farhood Pesyanian
Keyword(s):  
Composite Resin ◽  
Gap Size ◽  
Marginal Gap ◽  
Universal Adhesive ◽  
Class V ◽  
Etch And Rinse ◽  
The Mean ◽  
Composite Resin Restorations ◽  
Self Etch ◽  
Resin Restorations

Objectives: This in-vitro study aimed to evaluate the effect of cavity disinfection with chlorhexidine (CHX) on marginal gaps of Class V composite resin restorations bonded with a universal adhesive using self-etch and etch-and-rinse bonding strategy. Materials and Methods: Sixty sound human premolars were randomly assigned to two groups (n=30): group 1 (CHX) and group 2 (no CHX). Each group was divided into two subgroups (n=15) according to the bonding strategy of the universal adhesive (self-etch or etch-and-rinse). Class V cavities were prepared on the buccal surfaces of the teeth. The occlusal and gingival margins of the cavities were placed in enamel and dentin, respectively. In the first and second subgroups of both groups, the All-Bond Universal adhesive was applied with self-etch and etch-and-rinse bonding strategy, respectively. After restoration and thermocycling, the samples were sectioned, and marginal gaps at the gingival margins were measured in micrometer (µm) under a stereomicroscope. Two-way analysis of variance (ANOVA) was used to compare marginal gaps between the groups and the subgroups. Results: The mean marginal gap size was significantly affected by cavity disinfection (P=0.001) and bonding strategy (P=0.002). However, the interaction effect of these two factors on the mean marginal gap size was not significant (P=0.79). Conclusion: The use of CHX resulted in larger marginal gaps at the gingival margins of Class V composite resin restorations. Irrespective of disinfection, the self-etch bonding strategy resulted in larger marginal gaps compared to the etch-and-rinse bonding strategy.

Sign in / Sign up

Export Citation Format

Share Document