scholarly journals MODELING OF FORWARDER PRODUCTIVITY AND COSTS IN THINNED PINE STANDS

FLORESTA ◽  
2018 ◽  
Vol 48 (2) ◽  
pp. 285 ◽  
Author(s):  
Carla Krulikowski Rodrigues ◽  
Eduardo Da Silva Lopes ◽  
Afonso Figueiredo Filho ◽  
Matheus Kaminski Cândido Da Silva
Keyword(s):  
Mathematical Modeling ◽  
Standard Error ◽  
Cycle Time ◽  
Production Cost ◽  
Timber Harvesting ◽  
Production Costs ◽  
Time Motion ◽  
Operational Variables ◽  
Load Volume ◽  
Estimate Standard Error

AbstractThe aim of this study was to assess the influence of some operational variables on the forwarder productivity and production cost in thinned Pinus taeda L. stands by means of mathematical modeling. This study was carried out in a forest company located at Quedas do Iguaçu, state of Paraná, Brazil. Two stands at 9 and 10 years old from sites with high productivity and similar soil and relief features were studied. A time-motion study was applied to determine the operational cycle time, operational efficiency, productivity, and production costs. By means of mathematical modeling, we verified the influence of the variables: age of stand; cycle time; load volume; and extraction distance on the forwarder productivity and production costs. Models were fitted for estimating the forwarder productivity using cycle time, load volume, and extraction distance. Thus, we obtained the determination adjusted coefficients of 0.88 and 0.94, with an estimate standard error between 6.9% and 13.5%. Models for estimating production cost through the load volume variable presented a determination coefficient of 0.64 and 0.86, with an estimate standard error of 23.1% and 26.7%. Such results have shown the possibility of using mathematical models to estimate the performance of forest machines as a tool for planning the timber harvesting operations.

scholarly journals INCORPORATION OF UNCERTAINTY IN TECHNICAL AND ECONOMIC ANALYSIS OF A FELLER-BUNCHER

FLORESTA ◽  
2018 ◽  
Vol 48 (3) ◽  
pp. 403
Author(s):  
Danilo Simões ◽  
Ricardo Hideaki Miyajima ◽  
Rodrigo Petrongari Tonin ◽  
Paulo Torres Fenner ◽  
Gislaine Cristina Batistela
Keyword(s):  
Economic Analysis ◽  
Production Cost ◽  
Probability Distributions ◽  
Operating Cost ◽  
Timber Harvesting ◽  
Production Costs ◽  
P Value ◽  
Strong Positive Correlation ◽  
Technical And Economic Analysis ◽  
Positive Correlation Coefficient

The constant technical and economic analysis of timber harvesting operations is essential and determining, due to the monetary magnitude. Traditionally, these analyses are conducted deterministically, which does not allow obtaining values with probabilities of occurrence. Considering this issue, stochastic models were built in order to analyze the behavior of probabilistic production cost in felling operations with feller-buncher, through the Monte Carlo method. The study was conducted in the Central-West region of the state of São Paulo in a forest of Eucalyptus sp., with six years of age, planted in 3 x 2 m spacing. Technical analysis was based on the study of time and movements, which determined the effective productivity and economy in the hourly operating cost of the feller-buncher and in the production costs of the operation. Due to uncertainties, probability distributions were assigned to these results, which identified the most relevant variables and quantified the probabilities of the production cost. The results demonstrated that the fuel cost had a statistically significant strong positive correlation coefficient ( = 0.91) (p-value < 0.01). The hourly cost, consequently, was directly proportional to the production cost of the operation. The production cost of the operation in flat relief was 18% lower than the production cost of the operation in undulating relief.

Immaterial Cost and Production: Maximum Production Cost Level Through Marginal Approach

2020 ◽  
Vol 8 (2) ◽  
pp. 128-149
Author(s):  
Dini Maulana Lestari
Keyword(s):  
Quantitative Study ◽  
Marginal Cost ◽  
Production Cost ◽  
Maximum Level ◽  
Production Costs ◽  
Total Production ◽  
Sugar Factory ◽  
Maximum Production ◽  
Cost Approach ◽  
South Sulawesi

This paper will discuss about the immaterial costs and production yields at one of the refined sugar factory companies in Makassar, South Sulawesi. The theory is based on the fact that Immaterial is a cost that is almsgiving, meaning costs that are outside of the basic costs of the company in producing production, so this research aims to find out: (1) what is the production cost needed to produce this production, (2) the maximum level of production at company from 2013 to 2017. This type of research is a quantitative study because it uses a questionnaire in the form of values ​​that are processed using the marginal cost approach formula. The results of the analysis show that (1) the maximum level of production costs occurred in 2016 amounting to 6,912 with an Immaterial cost of Rp. 2,481,796,800 and the total production produced is 359,077.3 tons (2) The required workforce with the total production produced is 359,077.3 tones of 180 people including the maximum production point which means that the lowest value is achieved (optimal).    

PROFITABILITAS USAHA PETERNAKAN AYAM BROILER DENGAN TIPE KANDANG YANG BERBEDA

2020 ◽  
Vol 2 (1) ◽  
Author(s):  
Nurul Mukminah ◽  
Rita Purwasih
Keyword(s):  
Economic Analysis ◽  
Production Cost ◽  
Broiler Chicken ◽  
Production Costs ◽  
Different Types

This study aims to determine and compare the profitability of different types of broiler chicken farms (open and cloused houses) in Subang Regency. This study involved 9 farmers consisting of 5 farmers with closed house and 4 farmers with open house who partnered with PT. Surya Unggas Mandiri (PT. SUM). Production costs taken are 2 production periods from May-August 2018. Data are analyzed using economic analysis and descriptive methods. The results showed that the production cost per period per 1000 birds closed house was higher (Rp. 27.656.768,-) compared to open house (Rp. 24.975.671,-). The revenue per period per 1000 birds of closed house is higher (Rp. 30.606.931,-) compared to open house (Rp. 25.788.618,-). The profit of farmers who use closed house is higher (Rp. 2.621/period/bird) than open house (Rp.417,-). The profitability in close house s is 9.48% and is very feasible to develop

MINIMALISASI BIAYA SIMPAN DAN BIAYA SETUP PADA MULTIPLE PRODUK: SIMULASI DENGAN CAPACITATED LOT SIZING PROBLEM

2019 ◽  
Vol 4 (2) ◽  
pp. 205-214
Author(s):  
Erika Fatma
Keyword(s):  
Production Cost ◽  
Lot Sizing ◽  
Setup Time ◽  
Production Costs ◽  
Total Production ◽  
Product Cycle ◽  
Lot Size ◽  
Setup Costs ◽  
Lot Sizing Problem ◽  
Capacitated Lot Sizing

Lot sizing problem in production planning aims to optimize production costs (processing, setup and holding cost) by fulfilling demand and resources capacity costraint. The Capacitated Lot sizing Problem (CLSP) model aims to balance the setup costs and inventory costs to obtain optimal total costs. The object of this study was a plastic component manufacturing company. This study use CLSP model, considering process costs, holding costs and setup costs, by calculating product cycle and setup time. The constraint of this model is the production time capacity and the storage capacity of the finished product. CLSP can reduce the total production cost by 4.05% and can reduce setup time by 46.75%.  Keyword: Lot size, CLSP, Total production cost.

scholarly journals A novel approach to optimize the production cost of railway coaches of India using situational-based composite triangular and trapezoidal fuzzy LPP models

2021 ◽  
Author(s):  
Rakesh Kumar ◽  
Gaurav Dhiman ◽  
Neeraj Kumar ◽  
Rajesh Kumar Chandrawat ◽  
Varun Joshi ◽  
...  
Keyword(s):  
Comparative Study ◽  
Real Time ◽  
Production Cost ◽  
Upper Bounds ◽  
Production Costs ◽  
Cost Data ◽  
Novel Approach ◽  
Membership Grade ◽  
Minimum Costs

AbstractThis article offers a comparative study of maximizing and modelling production costs by means of composite triangular fuzzy and trapezoidal FLPP. It also outlines five different scenarios of instability and has developed realistic models to minimize production costs. Herein, the first attempt is made to examine the credibility of optimized cost via two different composite FLP models, and the results were compared with its extension, i.e., the trapezoidal FLP model. To validate the models with real-time phenomena, the Production cost data of Rail Coach Factory (RCF) Kapurthala has been taken. The lower, static, and upper bounds have been computed for each situation, and then systems of optimized FLP are constructed. The credibility of each model of composite-triangular and trapezoidal FLP concerning all situations has been obtained, and using this membership grade, the minimum and the greatest minimum costs have been illustrated. The performance of each composite-triangular FLP model was compared to trapezoidal FLP models, and the intense effects of trapezoidal on composite fuzzy LPP models are investigated.

scholarly journals The Moderate Operation Scales of Apples Based on Output, Profit, and Unit Production Costs in the Shaanxi Province of China

Land ◽  
2020 ◽  
Vol 9 (1) ◽  
pp. 25
Author(s):  
Congying Zhang ◽  
Qian Chang ◽  
Liqun Shao ◽  
Xuexi Huo
Keyword(s):  
Production Cost ◽  
Cost Model ◽  
Unit Cost ◽  
Production Costs ◽  
Shaanxi Province ◽  
Profit Model ◽  
Unit Production Cost ◽  
Net Profit ◽  
Apple Production ◽  
Moderate Scale

In the Shaanxi province, small and scattered plots impede an increase in the efficiency of apple production. Developing a moderate operation scale is a proper tool to solve inefficiencies in apple production, as it enables improving the factor allocation efficiency, resulting in higher yields, higher profit, or lower production costs. However, the moderate operation scales, based on output, profit, and production costs, may be different. This paper aimed to evaluate the moderate operation scale of apples from three perspectives of increasing yields and profits and reducing unit production cost. The study was based on survey data collected from 661 randomly selected apple farmers in eight counties of the Shaanxi province, China. The collected data were analyzed quantitatively by the input-output model, the net profit model, and unit production cost model. The findings show that: (1) The moderate operation scale oriented to increasing apple yields in the Shaanxi province should be 0.87–1.53 ha. (2) The moderate operation scale oriented to increasing the net profit of farmers in the Shaanxi province should be over 1.53 ha. (3) The moderate operation scale oriented to reducing the unit cost of apple production in the Shaanxi province should be 0.20–0.53 ha. The study provides evidence that policymakers should grasp the balance point and find the intersection of the operation scale based on output, profit, and unit production cost when guiding apple growers to carry out the moderate scale. We propose that 0.87–1.53 ha may be a suitable operation scale for apple production in the Shaanxi province at the current stage.

scholarly journals Performance evaluation of power-operated reapers for harvesting rice at farmers’ field

2018 ◽  
Vol 16 (1) ◽  
pp. 144-150
Author(s):  
Md Ashraful Alam ◽  
Anwar Hossen ◽  
AKM Saiful Islam ◽  
Monjurul Alam
Keyword(s):  
Performance Evaluation ◽  
Economic Performance ◽  
Production Cost ◽  
Field Capacity ◽  
Production Costs ◽  
High Wage ◽  
Harvesting Time ◽  
Actual Field ◽  
Field Efficiency ◽  
User Friendly

Harvesting is one of the major labor intensive works in rice cultivation. Appropriate harvesting machinery is urgently needed to reduce labor and production costs. Production cost of rice becomes high due to labor shortage and high wage rate during harvesting time. Techno-economic performance of Korean self-propelled reaper (KR), China self-propelled reaper (CR) and BRRI reaper (BR) were evaluated in order to identify the field constrains and problems of the reapers at Mithapukur of Rangpur, Bangladesh during Aman season of 2013. The actual field capacities of the KR, CR and BR were found 0.18, 0.17 and 0.15 ha h–1with the corresponding field efficiency of 55, 68 and 56%, respectively. The variation of field capacity among the models was due to turning time losses, weight of the reaper and operator’s skill. The fuel consumption of the reapers was 4.11, 2.61 and 8.39 l ha–1 for KR, CR and BR, respectively. The shattering loss of paddy harvesting was 1.66, 1.50 and 1.45% for KR, CR and BR, respectively. The break-even area of the reapers was 9.15, 7.82 and 8.43 ha yr-1 for KR, CR and BR, respectively. It is evident that the reaper could be used successfully as labor saving and user friendly technology to eliminate post-harvest problems in Bangladesh.J. Bangladesh Agril. Univ. 16(1): 144-150, April 2018

scholarly journals Aplikasi Metode Simpleks Pada Optimalisasi Biaya Bahan Baku (Studi Kasus: Ukm Najmah Klappertart)

2020 ◽  
Vol 17 (2) ◽  
pp. 129-140
Author(s):  
D Damayanti ◽  
A I Jaya ◽  
Resnawati
Keyword(s):  
Simplex Method ◽  
Production Cost ◽  
Production Costs ◽  
Optimal Production ◽  
Total Cost ◽  
Optimal Cost ◽  
Cost Of Production ◽  
The Cost

ABSTRACT The purpose of this research is to obtain an the optimal production costs of Klappertart based on the basic ingredients comparing the production cost of Klappertart in Najmah Klappertart with production costs using the simplex method. The result showed that the optimal costs is ,-. This result is equal to the total cost of klappertart by SMEs Najmah Klappertart, so it can be concluded that the cost of production klappertart based on the basic ingredients on SMEs Najmah Klappertart were optimal. Keywords      : Optimal Cost, Basic Ingredients, Production Costs. (A-Z), Simplex Method  

scholarly journals Impact of Distance between Strip Roads on Productivity and Costs of a Forwarder in Commercial Thinning of Pinus Taeda Stands

2020 ◽  
Vol 41 (2) ◽  
pp. 243-249
Author(s):  
Oscar Manuel de Jesús Vera Cabral ◽  
Eduardo da Silva Lopes ◽  
Carla Krulikowski Rodrigues ◽  
Afonso Figueiredo Filho
Keyword(s):  
Pinus Taeda ◽  
Value Added ◽  
Wood Products ◽  
Production Costs ◽  
Working Cycle ◽  
Time Motion ◽  
Commercial Thinning ◽  
Selective Harvest ◽  
Thinning Operations ◽  
The Impact

Demand for higher value-added wood products stimulates research for new, mainly mechanized, thinning operations in order to increase productivity and reduce production costs. In this context, the aim of this study was to evaluate the impact of distance between strip roads on forwarder productivity and costs of thinning operations in Pinus taeda stands. The study was carried out in 10-year-old Pinus taeda stands located in Parana State, Brazil. Two thinning methods were evaluated: (1) TH5: systematic harvest in every fifth tree row and selective harvest in adjacent rows; and (2) TH7: systematic harvest in every seventh tree row and selective harvest in adjacent rows. Working cycle times, productivity and costs were determined through a time-motion study of the forwarder. The additional variables evaluated were wood assortments (industrial wood and energy wood) and extraction distances (50, 100, 150 and 200 m), and mean values were compared between thinning methods using t tests for independent samples (α=0.05). Loading and unloading elements consumed the most time in the working cycle, with lower participation time in TH7 due to greater availability of logs along the strip roads (higher pile volumes), influencing total cycle time up to the mean distance of 150 m for both assortments. TH7 consequently showed 6% higher productivity, its energy yield was 5.3% lower and its production cost was 3.0% lower.

scholarly journals Influence of bifurcation on thinning, productivity and harvester production costs of Pinus taeda L.

2020 ◽  
pp. 1259-1263
Author(s):  
Carlos Cézar Cavassin Diniz ◽  
Romano Timofeiczyk Junior ◽  
Renato Gonçalves Robert ◽  
Eduardo da Silva Lopes ◽  
João Carlos Garzel Leodoro da Silva ◽  
...  
Keyword(s):  
Pinus Taeda ◽  
Cycle Time ◽  
Production Costs ◽  
Total Production ◽  
Plantation Forest ◽  
Operating Cycle ◽  
Operational Cycle ◽  
Time And Motion ◽  
Motion Study ◽  
Pinus Taeda L

In this work, we present that how bifurcation in Pinus trees can influence productivity and harvester production costs. Our example draws from one harvesting machine that works in thinning operations in forest plantations of Pinus taeda L. in a small Brazilian forestry company. To get daily productivity, we use the machine’s system, which provides such daily information as total production. We also used a time and motion study to obtain the meantime to cut, delimb, and process the tree stem into logs. In this way, we separated the normal trees from the forked trees to get the operating cycle time of the machine and get the productivity to the two types of trees. The continuous timing method was used for this purpose. The results show an increase of up to 22.9% in the operational cycle time for cutting forked trees, resulting in reduction of productivity of 5.58 m³ for each hour worked. The production cost increased by 23.3% on operation of forked trees, as the machine took more time to perform the partial activities of the operational cycle. This study can help many companies and contractors to calculate the appropriate productivity and production harvest cost according to the type of tree stems from the plantation forest.

Sign in / Sign up

Export Citation Format

Share Document