Informed Consent and Performance Data: Clinician Experience as a Material Risk

2017 ◽  
Vol 40 (2) ◽  
Author(s):  
Rebekah McWhirter
Keyword(s):  
Informed Consent ◽  
Performance Data ◽  
Clinician Experience ◽  
And Performance

Картофелекопатель с ротационной сепарирующей поверхностью

2018 ◽  
Author(s):  
V.M. Alakin ◽  
G.S. Nikitin
Keyword(s):  
Performance Data ◽  
Pilot Studies ◽  
Research Results ◽  
Operating Modes ◽  
Analysis Of Results ◽  
Design Characteristics ◽  
And Performance ◽  
Definition Of

Приведены результаты исследований экспериментального картофелекопателя с ротационной сепарирующей поверхностью. Особое внимание уделяется обоснованию конструктивных параметров и определению рабочих характеристик нового сепарирующего устройства. На основе анализа результатов экспериментальных исследований определены наиболее оптимальные режимы работы экспериментального картофелекопателя.Research results of an experimental potato digger with rotational separating web are published in this article. Special attention is paid to definition of design characteristics and performance data of the new separating device. Admissible operating modes are defined on the basis of the analysis of results of pilot studies of the experimental potato digger.

Heart Rate and Performance in Manual Missile Guidance

1971 ◽  
Vol 32 (2) ◽  
pp. 352-354
Author(s):  
Bengt Bergstroem ◽  
Peter Arnberg
Keyword(s):  
Heart Rate ◽  
Performance Data ◽  
Tracking Performance ◽  
Missile Guidance ◽  
Heart Rates ◽  
Laboratory Conditions ◽  
Stress Studies ◽  
And Performance

Earlier stress studies under laboratory conditions show that heart rates from 100 to 110 bpm are associated with significant decrements in missile-tracking performance. Data from real missile tracking by 8 operators with no stress deliberately induced indicate, however, that performance is unaffected up to 135 bpm, and only moderately affected in the 135- to 170-bpm region. The disagreement between the two sets of results highlights the difficulties in generalizing from stress experiments.

The Use of Touch-Sensitive Human-Computer Interfaces: Behavioral and Design Implications

1982 ◽  
Vol 26 (5) ◽  
pp. 435-435
Author(s):  
Dennis B. Beringer ◽  
Susan R. Maxwell
Keyword(s):  
Response Times ◽  
Data Entry ◽  
Task Type ◽  
Performance Data ◽  
Display Surface ◽  
Video Display Terminals ◽  
Computer Interfaces ◽  
Human Computer Interfaces ◽  
Positioning Device ◽  
And Performance

Interest in optimized human-computer interfaces has resulted in the development of a number of interesting devices that allow the computer and human operator to interact through a common drawing surface. These devices include the lightpen, lightgun (Goodwin, 1975), and a variety of touch-sensitive display overlay devices. Although touch devices were being investigated as early as 1965 (Orr and Hopkin, circa 1966), behavioral and performance data are scarce in relation to other sources of human-machine interface data. Availability of these devices has increased in the last 10 years and it is now possible to retrofit such devices to a wide variety of video display terminals at a reasonable cost. With the possibility of increased use looming on the horizon, it would be quite useful to examine the ergonomics of such devices and the behavioral adaptation or maladaptation that occurs for each user. Performance data available at this point from previous studies suggests that some positive increments in performance can be expected for graphic-based tasks while no serious decrements should be expected for discrete data entry tasks (Beringer, 1980; Stammers and Bird, 1980). The performance gains expected from this format of interaction are not to be won without some sacrifice elsewhere, however. Positioning of the display surface for optimum viewing may cause serious operator fatigue problems after extended use of the device if the device is to be used with relatively high frequency. The relationship of device positioning, device sensing resolution, and task type are being examined as they contribute to the comission of errors and the onset of fatigue. Experimentation was planned to examine how positioning of the device, or what can truly be called a “control/display unit”, affected the performance of visual discrimination tasks and manual designation tasks. Initial investigations used a single task to examine these questions by requiring the operator/subject to visually detect and manually designate the location of a break in one of 54 circles presented on a color c.r.t. display (essentially a Landholt C target). Responses were accepted by an infrared touch panel mounted on the display face. The c.r.t. was placed at four declinations during the blocks of trials; 90, 67, 45, and 35 degrees to the line of sight. Although a very strong learning effect was observed over the first 8 blocks of 25 trials each, performance leveled off, on the average, beginning with the ninth block of trials. No reliable effects of screen declination were found in the examination of response times or number of errors. Responses did tend to be located slightly lower than the target, however, for the greater declinations of the display surface. Subjective reports of physical difficulty of responding and fatigue did vary regularly with declination of the display. The relatively high location of the device resulted in shoulder and arm fatigue when the display was at 90 degrees and wrist fatigue when the display was at 35 degrees. Subsequent phases of the investigation will allow subjects to adjust parameters of height and declination (Brown and Schaum, 1980) and will use hand skin temperature and quantified postural information to assess the degree of fatigue incurred during device operation.

scholarly journals A Simple Microstrip Phase Shifter

1992 ◽  
Vol 45 (1) ◽  
pp. 105 ◽  
Author(s):  
SW Amy ◽  
MI Large
Keyword(s):  
Low Power ◽  
Phase Shifter ◽  
Narrow Band ◽  
Phase Shifters ◽  
Performance Data ◽  
Frequency Range ◽  
Design Chart ◽  
Binary Phase ◽  
Gain Variation ◽  
And Performance

A novel, inexpensive, series-connected loaded-line (SCOLL) phase shifter has been developed for the Molonglo Observatory Synthesis Telescope. The phase shifter, which operates at 0�843 GHz, consists of a ",3>'/8 length of microstrip with series connected varactors at each end. Although designed as a binary phase shifter, the insertion phase varies almost linearly with varactor reactance, with very little gain variation for phase ranges up to 90�. Thus, driven by a digital-to-analogue (D/ A) converter, a SCOLL becomes a programmable phase shifter of any desired resolution. The same technique would be suitable for narrow-band low power applications in the frequency range 0�1 to 10 GHz. This paper gives the basic theory of SCOLL phase shifters, a design chart, construction details and performance data.

Sign in / Sign up

Export Citation Format

Share Document