Optimal Design for Stacking Line of Rotor Blade in a Single-Stage Transonic Axial Compressor

2006 ◽  
Vol 9 (3) ◽  
pp. 7-13 ◽  
Keyword(s):  
Optimal Design ◽  
Rotor Blade ◽  
Axial Compressor ◽  
Single Stage ◽  
Transonic Axial Compressor

Stall Warning Using the Rotor Tip Pressure in a Transonic Axial Compressor With Circumferential Grooves

2018 ◽  
Author(s):  
Byeung Jun Lim ◽  
Tae Choon Park ◽  
Young Seok Kang
Keyword(s):  
Mass Flow Rate ◽  
Mass Flow ◽  
Flow Rate ◽  
Axial Compressor ◽  
Rotating Stall ◽  
Single Stage ◽  
Stall Inception ◽  
Casing Treatment ◽  
Stall Warning ◽  
Transonic Axial Compressor

In this study, characteristics of stall inception in a single-stage transonic axial compressor with circumferential grooves casing treatment were investigated experimentally. Additionally, the characteristic of increasing irregularity in the pressure inside circumferential grooves as the compressor approaches the stall limit was applied to the stall warning method. Spike-type rotating stall was observed in the single-stage transonic axial compressor with smooth casing. When circumferential grooves were applied, the stall inception was suppressed and the operating point of the compressor moved to lower flow rate than the stall limit. A spike-like disturbance was developed into a rotating stall cell and then the Helmholtz perturbation was overlapped on it at N = 80%. At N = 70 %, the Helmholtz perturbation was observed first and the amplitude of the wave gradually increased as mass flow rate decreased. At N = 60%, spike type stall inceptions were observed intermittently and then developed into continuous rotating stall at lower mass flow rate. Pressure measured at the bottom of circumferential grooves showed that the level of irregularity of pressure increased as flow rate decreased. Based on the characteristic of increasing irregularity of the pressure signals inside the circumferential grooves as stall approaches, an autocorrelation technique was applied to the stall warning. This technique could be used to provide warning against stall and estimate real-time stall margins in compressors with casing treatments.

Design Optimization of a Single-Stage Transonic Axial Compressor and Test Evaluation of Its Aerodynamic Performance

2012 ◽  
Vol 15 (6) ◽  
pp. 77-84 ◽  
Author(s):  
Tae Choon Park ◽  
Young-Seok Kang ◽  
Oh-Sik Hwang ◽  
Ji-Han Song ◽  
Byeung Jun Lim
Keyword(s):  
Design Optimization ◽  
Axial Compressor ◽  
Aerodynamic Performance ◽  
Single Stage ◽  
Test Evaluation ◽  
Transonic Axial Compressor

Numerical Investigation on Internal Flow Field of a Single-Stage Transonic Axial Compressor

2012 ◽  
Vol 15 (6) ◽  
pp. 85-91
Author(s):  
Ji-Han Song ◽  
Oh-Sik Hwang ◽  
Tae Choon Park ◽  
Byung-Jun Lim ◽  
Soo-Seok Yang ◽  
...  
Keyword(s):  
Flow Field ◽  
Numerical Investigation ◽  
Axial Compressor ◽  
Internal Flow ◽  
Single Stage ◽  
Transonic Axial Compressor

A Numerical Investigation of the Interaction Between Rotor Bow Waves and Upstream Wake Generators in a Transonic Compressor Stage

2003 ◽  
Author(s):  
Gregory Bloch ◽  
James Loellbach ◽  
Chunill Hah
Keyword(s):  
Numerical Investigation ◽  
Rotor Blade ◽  
Similar Case ◽  
Axial Compressor ◽  
Navier Stokes ◽  
Transonic Compressor ◽  
Blade Row ◽  
Transonic Axial Compressor ◽  
Main Effects ◽  
Blade Row Interaction

A numerical investigation of unsteady blade row interaction in a transonic axial compressor was performed. The compressor consists of an upstream wake generator (WG) blade row followed by a rotor blade row. Blade row interaction consists of two main effects: the downstream influence on the rotor flowfield of wakes and unsteady vortices shed from the wake generator, and the upstream influence on the wake generator of the rotor bow shock waves. An unsteady, two-dimensional, Navier-Stokes simulation was performed at the 75% span location of the compressor. Results from the numerical simulation are compared to previously reported numerical results and to experimental measurements from a similar case.

Aeromechanic performance of a single-stage transonic axial compressor with recirculation-bleeding channels

2020 ◽  
pp. 1-14
Author(s):  
Cong-Truong Dinh ◽  
Tien-Dung Vuong ◽  
Xuan-Truong Le ◽  
The-Mich Nguyen ◽  
Quang-Hai Nguyen
Keyword(s):  
Axial Compressor ◽  
Single Stage ◽  
Transonic Axial Compressor
Sign in / Sign up

Export Citation Format

Share Document