scholarly journals Evaluation of site effects on the seismic performance of a friction-damped steel IMF under near-fault earthquakes

2021 ◽  
Vol 5 (3) ◽  
pp. 34-45
Author(s):  
A. Taslimi ◽  
Sh. Safaei ◽  
◽  
Keyword(s):  
Seismic Performance ◽  
Site Effects ◽  
Near Fault ◽  
Near Fault Earthquakes

scholarly journals Seismic Performance Evaluation of Building-Damper System under Near-Fault Earthquake

2020 ◽  
Vol 2020 ◽  
pp. 1-21 ◽  
Author(s):  
Xiaoli Wu ◽  
Wei Guo ◽  
Ping Hu ◽  
Dan Bu ◽  
Xu Xie ◽  
...  
Keyword(s):  
Seismic Performance ◽  
Structural Damage ◽  
Pulse Velocity ◽  
Friction Damper ◽  
Pulse Period ◽  
Earthquake Excitation ◽  
Seismic Code ◽  
Velocity Amplitude ◽  
Near Fault ◽  
Near Fault Earthquakes

The building-damper system designed by a seismic code is usually considered to be able to withstand the attack of strong earthquakes. However, near-fault earthquakes, especially those with the forward-directivity effect, might cause early and unexpected failure of code-designed dampers and consequent severe structural damage. In this paper, by taking into account near-fault earthquakes, seismic performance of the building-damper system and damper failure’s influence are evaluated systematically. A 9-storey steel building is designed by the Chinese seismic code as the benchmark model, and five typical dampers, including buckling-restrained brace damper (BRB), friction damper (FD), self-centering damper (SCD), viscous damper (VD), and viscoelastic damper (VED), are adopted. It was found that the building-damper systems show a large response and possible damper failure under the near-fault earthquake excitations. Then, the influence of damper failure is investigated, which reveals that damper failure would significantly affect seismic performance of the building-damper system, especially for the building-SCD system. Subsequently, by introducing the artificial near-fault earthquake excitation, the influences of different pulse parameters, such as pulse velocity amplitude, pulse period, and the number of significant pulses, are studied. It shows that the pulse velocity amplitude and pulse period obviously affect the seismic performance, while the number of significant pulses presents little influence.

scholarly journals Seismic Soil Characterization to Estimate Site Effects Induced by Near-Fault Earthquakes: The Case Study of Pizzoli (Central Italy) during the Mw 6.7 2 February 1703, Earthquake

Geosciences ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 2
Author(s):  
Anna Chiaradonna ◽  
Marco Spadi ◽  
Paola Monaco ◽  
Felicia Papasodaro ◽  
Marco Tallini
Keyword(s):  
Site Effects ◽  
Water Pressure ◽  
Central Italy ◽  
Active Faults ◽  
Soil Liquefaction ◽  
Ground Failure ◽  
Near Fault ◽  
Local Seismic Response ◽  
Seismic Site Effects ◽  
Near Fault Earthquakes

Many of the urban settlements in Central Italy are placed nearby active faults and, consequently, the ground motion evaluation and seismic site effects under near-fault earthquakes are noteworthy issues to be investigated. This paper presents the results of site investigations, the seismic site characterization, and the local seismic response for assessing the effects induced by the Mw 6.7 2 February 1703, near-fault earthquake at the Madonna delle Fornaci site (Pizzoli, Central Italy) in which notable ground failure phenomena were observed, as witnessed by several coeval sources. Even though recent papers described these phenomena, the geological characteristics of the site and the failure mechanism have never been assessed through in-situ investigations and numerical modeling. Within a project concerning the assessment of soil liquefaction potential and co-seismic ground failure, deep and shallow continuous core drilling, geophysical investigations and in-hole tests have been carried out. Subsequently, the geotechnical model has been defined and the numerical quantification of the different hypotheses of failure mechanisms has been evaluated. Analyses showed that liquefaction did not occur, and the excess pore water pressure induced by the shaking was not the source of the ground failure. Therefore, it was hypothesized that the sinkhole was likely caused by earthquake-induced gas eruption.

scholarly journals Seismic Performance of Steel Structure-Foundation Systems Designed According to Eurocode 8 Provisions: The Case of Near-Fault Seismic Motions

Buildings ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 63 ◽  
Author(s):  
Panagiota Katsimpini ◽  
Foteini Konstandakopoulou ◽  
George Papagiannopoulos ◽  
Nikos Pnevmatikos ◽  
George Hatzigeorgiou
Keyword(s):  
Seismic Performance ◽  
Time History ◽  
Steel Structure ◽  
Steel Structures ◽  
Eurocode 8 ◽  
Near Fault ◽  
Building Foundation ◽  
Steel Building ◽  
Near Fault Earthquakes ◽  
Nonlinear Time History

The seismic performance of steel structure-foundation systems subjected to near-fault earthquakes was assessed on the basis of response results from nonlinear time-history seismic analyses. The structural results included the maximum values for residual interstory drift ratios, base shears, and overturning moments of the steel structures, as well as the maximum values for residual settlement and tilting of the foundations. In order to reveal the influence of soil-building-interaction on the aforementioned response results, the steel building-foundation systems were designed according to Eurocode 8 provisions, assuming initially fixed and then compliant base conditions. It was concluded that for the case of near-fault seismic motions, good seismic performance of steel building-foundation hybrid systems designed according to European Codes was not guaranteed. A particular thing to note for these systems under near-fault seismic motions was that the seismic performance of the steel structure was most likely unacceptable, while one of the foundations was always acceptable.

scholarly journals Influence of Elastomeric Bearings in Tension on the Seismic Performance of Base-Isolated r.c. Buildings

2020 ◽  
Vol 11 (1) ◽  
pp. 82
Author(s):  
Fabio Mazza ◽  
Mirko Mazza
Keyword(s):  
Base Isolation ◽  
Nonlinear Models ◽  
Vertical Component ◽  
Computer Code ◽  
Nonlinear Phenomena ◽  
Isolation System ◽  
Elastomeric Bearings ◽  
Near Fault ◽  
Base Isolation System ◽  
Near Fault Earthquakes

Elastomeric bearings are commonly used in base-isolation systems to protect the structures from earthquake damages. Their design is usually developed by using nonlinear models where only the effects of shear and compressive loads are considered, but uncertainties still remain about consequences of the tensile loads produced by severe earthquakes like the near-fault ones. The present work aims to highlight the relapses of tension on the response of bearings and superstructure. To this end, three-, seven- and ten-storey r.c. framed buildings are designed in line with the current Italian seismic code, with a base-isolation system constituted of High-Damping-Rubber Bearings (HDRBs) designed for three values of the ratio between the vertical and horizontal stiffnesses. Experimental and analytical results available in literature are used to propose a unified nonlinear model of the HDRBs, including cavitation and post-cavitation of the elastomer. Nonlinear incremental dynamic analyses of the test structures are carried out using a homemade computer code, where other models of HDRBs considering only some nonlinear phenomena are implemented. Near-fault earthquakes with comparable horizontal and vertical components, prevailing horizontal component and prevailing vertical component are considered as seismic input. Numerical results highlight that a precautionary estimation of response parameters of the HDRBs is attained referring to the proposed model, while its effects on the nonlinear response of the superstructure are less conservative.

scholarly journals Seismic Response of RC Frames with a Soft First Story Retrofitted with Hysteretic Dampers under Near-Fault Earthquakes

2021 ◽  
Vol 11 (3) ◽  
pp. 1290
Author(s):  
Santiago Mota-Páez ◽  
David Escolano-Margarit ◽  
Amadeo Benavent-Climent
Keyword(s):  
Cost Effective ◽  
Far Field ◽  
Soft Story ◽  
Near Fault ◽  
Rc Frames ◽  
Story Drift ◽  
Number Of Cycles ◽  
Rc Frame Structures ◽  
Near Fault Earthquakes ◽  
Hysteretic Dampers

Reinforced concrete (RC) frame structures with open first stories and masonry infill walls at the upper stories are very common in seismic areas. Under strong earthquakes, most of the energy dissipation demand imposed by the earthquake concentrates in the first story, and this eventually leads the building to collapse. A very efficient and cost-effective solution for the seismic upgrading of this type of structure consists of installing hysteretic dampers in the first story. This paper investigates the response of RC soft-story frames retrofitted with hysteretic dampers subjected to near-fault ground motions in terms of maximum displacements and lateral seismic forces and compares them with those obtained by far-field earthquakes. It is found that for similar levels of total seismic input energy, the maximum displacements in the first story caused by near-fault earthquakes are about 1.3 times larger than those under far-field earthquakes, while the maximum inter-story drift in the upper stories and the distribution and values of the lateral forces are scarcely affected. It is concluded that the maximum displacements can be easily predicted from the energy balance of the structure by using appropriate values for the parameter that reflects the influence of the impulsivity of the ground motion: the so-called equivalent number of cycles.

Sign in / Sign up

Export Citation Format

Share Document