Poly(alkylene Oxide) Rubbers

1964 ◽  
Vol 37 (1) ◽  
pp. 1-5 ◽  
Author(s):  
J. G. Hendrickson ◽  
A. E. Gurgiolo ◽  
W. E. Prescott
Keyword(s):  
Tensile Strength ◽  
Physical Properties ◽  
Propylene Oxide ◽  
Glycidyl Ether ◽  
High Grade ◽  
Oil Resistance ◽  
Compression Set ◽  
Alkylene Oxide ◽  
Allyl Glycidyl Ether

Abstract A high grade rubber was made by vulcanizing copolymers of propylene oxide and allyl glycidyl ether. The crude polymer contained both crystalline and amorphous fractions. The total polymer could be sulfur cured without fractionation or removing the catalyst—a partly hydrolized ferric alkoxide, resulting from the reaction of FeCl3 with propylene oxide. Variables in the vulcanization recipe were studied, and a tensile strength of 1980 psi with 560% elongation was obtained. Improved tear and oil resistance were observed as compared with SBR rubber. Other physical properties compared favorably with commencal rubbers, except for compression set.

Properties of Poly(Alkylene Oxide) Elastomers

1972 ◽  
Vol 45 (4) ◽  
pp. 900-907 ◽  
Author(s):  
H. L. Hsieh ◽  
R. F. Wright
Keyword(s):  
Ethylene Oxide ◽  
Oxidation Resistance ◽  
Propylene Oxide ◽  
Dynamic Properties ◽  
Glycidyl Ether ◽  
Solvent Resistance ◽  
Alkylene Oxide ◽  
Allyl Glycidyl Ether ◽  
Zinc Acetylacetonate ◽  
Freeze Point

Abstract The catalyst comprised of triisobutylaluminum, zinc acetylacetonate, and water was used to prepare homopolymer of epichlorohydrin; copolymers of epichlorohydrin with propylene oxide, ethylene oxide, and allyl glycidyl ether; and terpolymers of epichlorohydrin, propylene oxide, and allyl glycidyl ether and of epichlorohydrin, ethylene oxide, and allyl glycidyl ether. The vulcanizates of these rubbers provide variations of stress-strain and dynamic properties, freeze point, hardness, and solvent resistance depending on the type and amount of comonomer. In general, these rubbers have excellent heat, ozone, and oxidation resistance as well as oil and solvent resistance.

scholarly journals Allyl glycidyl ether-modified animal glue binder for improved water resistance and bonding strength in sand casting

2021 ◽  
Vol 2 (2) ◽  
Author(s):  
Chen-chen Fan ◽  
Qian Tang
Keyword(s):  
Tensile Strength ◽  
Bonding Strength ◽  
Room Temperature ◽  
Water Resistance ◽  
Glycidyl Ether ◽  
Animal Glue ◽  
Practical Application ◽  
Foundry Industry ◽  
Dog Bone ◽  
Allyl Glycidyl Ether

This paper aims to develop a modified animal glue sand binder for foundry casting with improved water resistance and bonding strength. An efficient method is reported by using sodium hydroxide as the catalyst to improve the operability of animal glue binder and allyl glycidyl ether as the modifier to improve the water resistance and bonding strength. Sand specimens prepared using allyl glycidyl ether-modified animal glue binder were cured by compressed air at room temperature. The proposed method saves energy and is environmentally friendly and inexpensive. Compared with unmodified animal glue binder, standard dog bone sand specimens with allyl glycidyl ether-modified animal glue binder had higher tensile strength of 2.58 MPa, flowability of 1.95 g, better water resistance (a lower decrease in tensile strength at 25 °C and relative humidity of 60%), and good collapsibility. This allyl glycidyl ether-modified animal glue binder is suitable for practical application in the foundry industry.

NJZ ALLOY No. 10

Alloy Digest ◽  
1975 ◽  
Vol 24 (7) ◽  
Keyword(s):  
Tensile Strength ◽  
Corrosion Resistance ◽  
New Jersey ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
High Grade ◽  
Good Ductility

Abstract NJZ ALLOY No. 10 is an alloy with medium tensile strength and elongation. It is produced from a high-grade zinc base by additions of cadmium, iron, and lead. It combines good ductility with stiffness and its applications include hardware and laundry tags. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep and fatigue. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Zn-20. Producer or source: New Jersey Zinc Company.

Study on the Heat-Oil Resistance Capacity of Surface Chemically Modified Nitrile Rubber

2011 ◽  
Vol 418-420 ◽  
pp. 954-958
Author(s):  
Heng Han ◽  
Shi Jie Wang ◽  
Xiao Ren Lv
Keyword(s):  
Tensile Strength ◽  
Reaction Mechanism ◽  
Physical Properties ◽  
Chemical Treatment ◽  
Nitrile Rubber ◽  
Fluoride Treatment ◽  
Oil Resistance ◽  
Chemically Modified ◽  
Modification Effect ◽  
Mixture Treatment

After Fluoride, Bromide, Iodide treatment and mixture treatment on the surface of nitrile rubber, the reaction mechanism and threatment effect on the heat oil resistance of nitrile rubber are explored. Several methods are introduced to compare the modification effect, and the SEM equipment is adopted to analyze the reasons. The results show that, Fluoride, Bromide, Iodide treatment on the surface of nitrile rubber, did not significantly improve the oil resistance of the material, but mixture treatment made NBR oil resistance improved significantly. Chemical treatment, especially fluoride treatment and mixture treatment, can significantly improve the tensile strength, elongation, hardness and other physical properties.

BELMALLOY

Alloy Digest ◽  
1954 ◽  
Vol 3 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
High Grade ◽  
Malleable Iron ◽  
Shock Resistance ◽  
High Torque

Abstract BELMALLOY is a high grade pearlitic malleable iron providing rigidity and shock resistance to high torque loads. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on heat treating, machining, and joining. Filing Code: CI-6. Producer or source: Belle City Malleable Iron Company.

DURIMPHY

Alloy Digest ◽  
2007 ◽  
Vol 56 (2) ◽  
Keyword(s):  
Tensile Strength ◽  
Corrosion Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Precipitation Hardening ◽  
Heat Treating ◽  
High Yield ◽  
High Yield Strength ◽  
Precision Alloys ◽  
Very High

Abstract Durimphy is a maraging steel with 1724 MPa (250 ksi) tensile strength and a very high yield strength due to precipitation hardening. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: FE-140. Producer or source: Metalimphy Precision Alloys.

CENTRI-CAST GRAY IRON 50

Alloy Digest ◽  
1981 ◽  
Vol 30 (8) ◽  
Keyword(s):  
Tensile Strength ◽  
Shear Strength ◽  
Physical Properties ◽  
Machine Tools ◽  
Heat Treating ◽  
Gray Iron ◽  
Centrifugally Cast ◽  
Wide Range ◽  
Nominal Tensile Strength ◽  
Cast Gray Iron

Abstract CENTRI-CAST GRAY IRON 50 is a centrifugally cast gray iron with a nominal tensile strength of 50,000 psi. It is cast in the form of tubing which has a wide range of uses in applications where size and shape are of paramount importance and freedom from pattern cost is an important consideration. Among its many applications are farm machinery, seals, bushings, machine tools and general machinery uses. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on casting, heat treating, machining, and surface treatment. Filing Code: CI-51. Producer or source: Federal Bronze Products Inc..

CENTRI-CAST GRAY IRON 55

Alloy Digest ◽  
1979 ◽  
Vol 28 (9) ◽  
Keyword(s):  
Tensile Strength ◽  
Shear Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Heat Treating ◽  
Gray Iron ◽  
Centrifugally Cast ◽  
Wide Range ◽  
Nominal Tensile Strength ◽  
Cast Gray Iron

Abstract CENTRI-CAST GRAY IRON 55 is a centrifugally cast gray iron with a nominal tensile strength of 55,000 psi. It is produced in the form of tubing which has a wide range of uses in applications where size and shape are of paramount importance and freedom from pattern cost is an important consideration. Typical applications are seals, bushings, farm machinery, casings and general machinery uses. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on casting, heat treating, machining, and surface treatment. Filing Code: CI-48. Producer or source: Federal Bronze Products Inc..

Sign in / Sign up

Export Citation Format

Share Document