Sulfur Linkage in Vulcanized Rubber. Reaction of Sulfur with 2-Methyl-2-Butene

1948 ◽  
Vol 21 (1) ◽  
pp. 14-26
Author(s):  
Milton L. Selker ◽  
A. R. Kemp
Keyword(s):  
Small Molecules ◽  
Methyl Iodide ◽  
Small Molecule ◽  
Three Dimensional ◽  
Model Systems ◽  
Basic Knowledge ◽  
Vulcanized Rubber ◽  
Dimensional Network ◽  
Rate Of Reaction ◽  
Definition Of

Abstract Year by year the complete definition of vulcanized rubber in terms of organic chemistry has become more desirable. The severity of the demands on rubber products makes it imperative to extend basic knowledge of vulcanization if we are to overcome the traditional defects or use limitations in this field. Chemical investigations of the vulcanization problem can be arranged into three lines of attack. In the first method the vulcanizate network is severed at various points by chemical or thermal means to liberate small portions of the material which can be studied as are small molecules. Ideally there should be no alteration of the linkages except where cutting of the chains takes place. Unfortunately no such “scissors” are known. Midgley, Henne, and Sheppard applied the thermal decomposition method to ebonite. Their study of the fragments, based on 1 per cent of the total material involved, was inclusive. Secondly, a small molecule reagent which swells the rubber may be used to penetrate the three-dimensional network and react with the various linkages in it. This method was used by Meyer and Hohenemser, who diffused methyl iodide into vulcanized rubber. This complicated reaction and its background with pure sulfur compounds were reported in the first two articles in the present series. The conclusions of this study were that the part of the combined sulfur which could be removed as trimethylsulfonium iodide was sulfide sulfur linked to a carbon atom alpha to a double bond. In most cases the less of this type of sulfur present, the higher the tensile strength of the vulcanizate. Methyl iodide was successful to a hitherto unattained degree because both its rate of reaction and products vary with the type of sulfur bond. This work left unanswered the question of the sulfur linkages which were not attacked by methyl iodide—in some cases the greater part of the combined sulfur. The third chemical line of attack is the study of model systems. A small molecule, such as an olefin, is reacted with sulfur and rubber-compounding ingredients; then, from identification of the products and study of the reaction, conclusions concerning vulcanizates are reached by analogy. The use of this method is old in chemical problems.

Mechanochemical Devulcanization of Vulcanized Gum Natural Rubber

2005 ◽  
Vol 21 (3) ◽  
pp. 183-199
Author(s):  
G.K. Jana ◽  
C.K. Das
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Natural Rubber ◽  
Three Dimensional ◽  
Elongation At Break ◽  
Tear Strength ◽  
Vulcanized Rubber ◽  
Dimensional Network ◽  
Polymeric Chains ◽  
Cure Time

De-vulcanization of vulcanized elastomers represents a great challenge because of their three-dimensional network structure. Sulfur-cured gum natural rubbers containing three different sulfur/accelerator ratios were de-vulcanized by thio-acids. The process was carried out at 90 °C for 10 minutes in an open two-roll cracker-cum-mixing mill. Two concentrations of de-vulcanizing agent were tried in order to study the cleavage of the sulfidic bonds. The mechanical properties of the re-vulcanized rubber (like tensile strength, modulus, tear strength and elongation at break) were improved with increasing concentrations of de-vulcanizing agent, because the crosslink density increased. A decrease in scorch time and in optimum cure time and an increase in the state of cure were observed when vulcanized rubber was treated with high amounts of de-vulcanizing agent. The temperature of onset of degradation was also increased with increasing concentration of thio-acid. DMA analysis revealed that the storage modulus increased on re-vulcanization. From IR spectroscopy it was observed that oxidation of the main polymeric chains did not occur at the time of high temperature milling. Over 80% retention of the original mechanical properties (like tensile strength, modulus, tear strength and elongation at break) of the vulcanized natural rubber was achieved by this mechanochemical process.

scholarly journals Toward the library generation of natural product-like polycyclic derivatives by stereocontrolled diversity-oriented synthesis

2005 ◽  
Vol 77 (1) ◽  
pp. 163-178 ◽  
Author(s):  
P. Arya ◽  
S. Quevillon ◽  
R. Joseph ◽  
C.-Q. Wei ◽  
Z. Gan ◽  
...  
Keyword(s):  
Small Molecules ◽  
Natural Product ◽  
Small Molecule ◽  
Protein Interactions ◽  
Protein Function ◽  
Three Dimensional ◽  
Structural Complexity ◽  
Complex Nature ◽  
Bioactive Natural Products ◽  
Small Molecule Libraries

Due to the growing interest in small molecules that could help in understanding protein–protein interactions based on signal transduction, the demand for the generation of small-molecule libraries that are inspired by bioactive natural products has grown significantly. Many of these pathways are highly complex and present tremendous challenges with the use of classical tools. A rapid access to natural product-like small molecules having structural complexity and diversity is crucial for systematically dissecting the functions of complex protein networking and understanding cell signaling pathways. The complex nature, the three-dimensional architecture, and the number of protein binding functional groups presented in three-dimensional arrays are some of the attractive features to incorporate in small-molecule chemical probes to be used as modulators of protein function.

Application of high-resolution field-emission LVSEM, backscatter imaging, immunogold staining to definition of the spatial distributions of two human neutrophil adherence receptors

1993 ◽  
Vol 51 ◽  
pp. 36-37
Author(s):  
Robert D. Nelson ◽  
Sharon R. Hasslen ◽  
Stanley L. Erlandsen
Keyword(s):  
Cell Surface ◽  
Surface Membrane ◽  
Three Dimensional ◽  
Human Neutrophils ◽  
Spatial Distributions ◽  
Immunogold Staining ◽  
Functional Control ◽  
Neutrophil Adherence ◽  
Definition Of ◽  
Mode Of Attachment

Receptors are commonly defined in terms of number per cell, affinity for ligand, chemical structure, mode of attachment to the cell surface, and mechanism of signal transduction. We propose to show that knowledge of spatial distribution of receptors on the cell surface can provide additional clues to their function and components of functional control.L-selectin and Mac-1 denote two receptor populations on the neutrophil surface that mediate neutrophil-endothelial cell adherence interactions and provide for targeting of neutrophil recruitment to sites of inflammation. We have studied the spatial distributions of these receptors using LVSEM and backscatter imaging of isolated human neutrophils stained with mouse anti-receptor (primary) antibody and goat anti-mouse (secondary) antibody conjugated to 12 nm colloidal gold. This combination of techniques provides for three-dimensional analysis of the expression of these receptors on different surface membrane domains of the neutrophil: the ruffles and microvilli that project from the cell surface, and the cell body between these projecting structures.

A Free Energy Perturbation Approach to Estimate the Intrinsic Solubilities of Drug-like Small Molecules

2019 ◽  
Author(s):  
Sayan Mondal ◽  
Gary Tresadern ◽  
Jeremy Greenwood ◽  
Byungchan Kim ◽  
Joe Kaus ◽  
...  
Keyword(s):  
Solid State ◽  
Small Molecules ◽  
Three Dimensional ◽  
Aqueous Solubility ◽  
Computational Approach ◽  
Free Energy Perturbation ◽  
Perturbation Approach ◽  
Energy Perturbation ◽  
State Form ◽  
Good Agreement

<p>Optimizing the solubility of small molecules is important in a wide variety of contexts, including in drug discovery where the optimization of aqueous solubility is often crucial to achieve oral bioavailability. In such a context, solubility optimization cannot be successfully pursued by indiscriminate increases in polarity, which would likely reduce permeability and potency. Moreover, increasing polarity may not even improve solubility itself in many cases, if it stabilizes the solid-state form. Here we present a novel physics-based approach to predict the solubility of small molecules, that takes into account three-dimensional solid-state characteristics in addition to polarity. The calculated solubilities are in good agreement with experimental solubilities taken both from the literature as well as from several active pharmaceutical discovery projects. This computational approach enables strategies to optimize solubility by disrupting the three-dimensional solid-state packing of novel chemical matter, illustrated here for an active medicinal chemistry campaign.</p>

From Levinthal’s Paradox to the Effects of Cell Environmental Perturbation on Protein Folding

2020 ◽  
Vol 26 (42) ◽  
pp. 7537-7554 ◽  
Author(s):  
Juan Zeng ◽  
Zunnan Huang
Keyword(s):  
Protein Folding ◽  
Posttranslational Modifications ◽  
Three Dimensional ◽  
Rational Drug Design ◽  
Basic Knowledge ◽  
Sequence Evolution ◽  
3D Structures ◽  
Folding Mechanism ◽  
Cellular Environment ◽  
Environment Temperature

Background: The rapidly increasing number of known protein sequences calls for more efficient methods to predict the Three-Dimensional (3D) structures of proteins, thus providing basic knowledge for rational drug design. Understanding the folding mechanism of proteins is valuable for predicting their 3D structures and for designing proteins with new functions and medicinal applications. Levinthal’s paradox is that although the astronomical number of conformations possible even for proteins as small as 100 residues cannot be fully sampled, proteins in nature normally fold into the native state within timescales ranging from microseconds to hours. These conflicting results reveal that there are factors in organisms that can assist in protein folding. Methods: In this paper, we selected a crowded cell-like environment and temperature, and the top three Posttranslational Modifications (PTMs) as examples to show that Levinthal’s paradox does not reflect the folding mechanism of proteins. We then revealed the effects of these factors on protein folding. Results: The results summarized in this review indicate that a crowded cell-like environment, temperature, and the top three PTMs reshape the Free Energy Landscapes (FELs) of proteins, thereby regulating the folding process. The balance between entropy and enthalpy is the key to understanding the effect of the crowded cell-like environment and PTMs on protein folding. In addition, the stability/flexibility of proteins is regulated by temperature. Conclusion: This paper concludes that the cellular environment could directly intervene in protein folding. The long-term interactions of the cellular environment and sequence evolution may enable proteins to fold efficiently. Therefore, to correctly understand the folding mechanism of proteins, the effect of the cellular environment on protein folding should be considered.

Development of Mucoadhesive Buccal Drug Delivery System of Propranolol Hydrochloride Using Aster ericoides Mucilage

2020 ◽  
Vol 10 (2) ◽  
pp. 133-148
Author(s):  
Ankaj Kaundal ◽  
Pravin Kumar ◽  
Rajendra Awasthi ◽  
Giriraj T. Kulkarni
Keyword(s):  
Buccal Cavity ◽  
Three Dimensional ◽  
Hot Water ◽  
Fickian Diffusion ◽  
Aster Ericoides ◽  
Dimensional Network ◽  
Buccal Tablet ◽  
Significant Difference ◽  
Volunteer Group

Aim: The study was aimed to develop mucoadhesive buccal tablets using Aster ericoides leaves mucilage. Background : Mucilages are naturally occurring high-molecular-weight polyuronides, which have been extensively studied for their application in different pharmaceutical dosage forms. Objective: The objective of the present research was to establish the mucilage isolated from the leaves of Aster ericoides as an excipient for the formulation of the mucoadhesive buccal tablet. Method: The mucilage was isolated from the leaves of Aster ericoides by maceration, precipitated with acetone and characterized. Tablets were prepared using wet granulation technique and evaluated for various official tests. Results: The mucilage was found to be non-toxic on A-431 and Vero cell lines. It was insoluble but swellable in cold and hot water. The results indicate that mucilage can form a three-dimensional network. The pH of the mucilage (6.82 ± 0.13) indicated that it might be non-irritant to the buccal cavity. The mucilage was found to be free from microbes. The release of drug was by Fickian diffusion. The in vivo buccal tablet acceptance was 80%. No significant difference between the diastolic blood pressure of standard and Aster tablets treated volunteer group was recorded. Conclusion: The mucilage was found to be non-toxic on A-431 and Vero cell lines. It was insoluble but swellable in cold and hot water. The results indicate that mucilage can form a three-dimensional network. The pH of the mucilage (6.82 ± 0.13) indicated that it might be non-irritant to the buccal cavity. The mucilage was found to be free from microbes. The release of drug was by Fickian diffusion. The in vivo buccal tablet acceptance was 80%. No significant difference between the diastolic blood pressure of standard and Aster tablets treated volunteer group was recorded. Other: However, to prove the potency of the polymer, in vivo bioavailability studies in human volunteers are needed along with chronic toxicity studies in suitable animal models.

Casimir forces and vacuum energy

2017 ◽  
Author(s):  
Serge Reynaud ◽  
Astrid Lambrecht
Keyword(s):  
Casimir Force ◽  
Dimensional Space ◽  
Three Dimensional ◽  
Thermal Fluctuations ◽  
Model Systems ◽  
Vacuum Field ◽  
Force Measurements ◽  
Casimir Forces ◽  
Current State ◽  
Field Fluctuations

The Casimir force is an effect of quantum vacuum field fluctuations, with applications in many domains of physics. The ideal expression obtained by Casimir, valid for perfect plane mirrors at zero temperature, has to be modified to take into account the effects of the optical properties of mirrors, thermal fluctuations, and geometry. After a general introduction to the Casimir force and a description of the current state of the art for Casimir force measurements and their comparison with theory, this chapter presents pedagogical treatments of the main features of the theory of Casimir forces for one-dimensional model systems and for mirrors in three-dimensional space.

scholarly journals Crystal structure of K[Hg(SCN)3] – a redetermination

2014 ◽  
Vol 70 (9) ◽  
pp. i46-i46 ◽  
Author(s):  
Matthias Weil ◽  
Thomas Häusler
Keyword(s):  
Crystal Structure ◽  
Room Temperature ◽  
Three Dimensional ◽  
Lattice Parameters ◽  
Bond Lengths ◽  
Dimensional Network ◽  
Anisotropic Displacement Parameters ◽  
Precision And Accuracy ◽  
Standard Deviations ◽  
Atomic Coordinates

The crystal structure of the room-temperature modification of K[Hg(SCN)3], potassium trithiocyanatomercurate(II), was redetermined based on modern CCD data. In comparison with the previous report [Zhdanov & Sanadze (1952).Zh. Fiz. Khim.26, 469–478], reliability factors, standard deviations of lattice parameters and atomic coordinates, as well as anisotropic displacement parameters, were revealed for all atoms. The higher precision and accuracy of the model is, for example, reflected by the Hg—S bond lengths of 2.3954 (11), 2.4481 (8) and 2.7653 (6) Å in comparison with values of 2.24, 2.43 and 2.77 Å. All atoms in the crystal structure are located on mirror planes. The Hg2+cation is surrounded by four S atoms in a seesaw shape [S—Hg—S angles range from 94.65 (2) to 154.06 (3)°]. The HgS4polyhedra share a common S atom, building up chains extending parallel to [010]. All S atoms of the resulting1∞[HgS2/1S2/2] chains are also part of SCN−anions that link these chains with the K+cations into a three-dimensional network. The K—N bond lengths of the distorted KN7polyhedra lie between 2.926 (2) and 3.051 (3) Å.

Sign in / Sign up

Export Citation Format

Share Document