Diisocyanate-Linked Polymers. II. Mechanical and Swelling Properties of Some Polyurethane Elastomers

1960 ◽  
Vol 33 (4) ◽  
pp. 1092-1113
Author(s):  
Thor L. Smith ◽  
Alan B. Magnusson
Keyword(s):  
Mechanical Properties ◽  
Chemical Structure ◽  
Practical Importance ◽  
Linear Polymers ◽  
Dilute Solution ◽  
Polyurethane Elastomers ◽  
Swelling Properties ◽  
Dilute Solution Properties ◽  
One Step ◽  
Cast Technique

Abstract In recent years, as a result of pioneering work in Germany and England, diisocyanate-linked polymers have assumed increasing industrial importance. Special interest is being shown in elastomers and foams, although studies of fibers and plastics are continuing. These several classes of diisocyanate-linked polymers, with their markedly different mechanical properties, are possible because substances having two or more groups containing active hydrogen can potentially be linked by diisocyanates to yield a polymer. Since a great number of such substances exist, data which show relationships between polymer structure and mechanical properties have practical importance as well as theoretical interest. The first paper of this series on diisocyanate-linked polymers discussed the dilute solution properties of linear polymers prepared from toluene-2,4-diisocyanate and polyoxypropylene glycol 2025 (PPG). This paper discusses the properties of one class of diisocyanate-linked elastomers prepared by a one-step cast technique, i.e., all reactants are mixed together initially and then allowed to cure. Although these polyurethane elastomers have relatively poor mechanical properties as compared with certain other types of polyurethane elastomers, they are useful in applications where high tensile strength, tear resistance, and ultimate elongation are not required. They also constitute a class of polyurethane polymers convenient for use in studying relationships between chemical structure and mechanical properties.

Synthesis and Properties of Regular Star Polybutadienes with 32 Arms

1992 ◽  
Vol 65 (2) ◽  
pp. 303-314 ◽  
Author(s):  
L-L. Zhou ◽  
N. Hadjichristidis ◽  
P. M. Toporowski ◽  
J. Roovers
Keyword(s):  
Molecular Weight ◽  
Coupling Agent ◽  
Hard Sphere ◽  
Star Polymers ◽  
Radius Of Gyration ◽  
Linear Polymers ◽  
Solution Properties ◽  
Mean Square ◽  
Dilute Solution ◽  
Dilute Solution Properties

Abstract A dendrimer carbosilane containing 32 Si—Cl bonds in the perimeter has been prepared and has been used as a coupling agent to prepare 32-arm star polybutadienes. The dilute-solution properties 〈RG2〉, A2, [η], and D0 have been measured in one good solvent and in one ¸ -solvent. The dimensions of the 32-arm star polymers are compared with those of linear polymers at constant molecular weight. It is shown that the 32-arm star polybutadiene has the characteristic properties of a hard-sphere molecule in dilute solution. The equivalent hard-sphere radii calculated from A2, D0 and [η] are identical and 1.29 times larger than the root mean-square radius of gyration. The Daoud—Cotton scaling model for stars is also tested.

Effect of Dynamic Crosslinking on Mechanical Properties of PP/EPDM Blends

1993 ◽  
Vol 58 (11) ◽  
pp. 2642-2650 ◽  
Author(s):  
Zdeněk Kruliš ◽  
Ivan Fortelný ◽  
Josef Kovář
Keyword(s):  
Mechanical Properties ◽  
Impact Strength ◽  
Shear Modulus ◽  
High Impact ◽  
Necessary Condition ◽  
Step Method ◽  
Melt Mixing ◽  
One Step ◽  
High Impact Strength ◽  
Dynamic Curing

The effect of dynamic curing of PP/EPDM blends with sulfur and thiuram disulfide systems on their mechanical properties was studied. The results were interpreted using the knowledge of the formation of phase structure in the blends during their melt mixing. It was shown, that a sufficiently slow curing reaction is necessary if a high impact strength is to be obtained. Only in such case, a fine and homogeneous dispersion of elastomer can be formed, which is the necessary condition for high impact strength of the blend. Using an inhibitor of curing in the system and a one-step method of dynamic curing leads to an increase in impact strength of blends. From the comparison of shear modulus and impact strength values, it follows that, at the stiffness, the dynamically cured blends have higher impact strength than the uncured ones.

scholarly journals Is Dialdehyde Chitosan a Good Substance to Modify Physicochemical Properties of Biopolymeric Materials?

2021 ◽  
Vol 22 (7) ◽  
pp. 3391
Author(s):  
Sylwia Grabska-Zielińska ◽  
Alina Sionkowska ◽  
Ewa Olewnik-Kruszkowska ◽  
Katarzyna Reczyńska ◽  
Elżbieta Pamuła
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Physicochemical Properties ◽  
Silk Fibroin ◽  
Three Dimensional ◽  
Microscopy Imaging ◽  
Maximum Deformation ◽  
One Step ◽  
Chitosan Blends ◽  
Fourier Transfer Infrared Spectroscopy

The aim of this work was to compare physicochemical properties of three dimensional scaffolds based on silk fibroin, collagen and chitosan blends, cross-linked with dialdehyde starch (DAS) and dialdehyde chitosan (DAC). DAS was commercially available, while DAC was obtained by one-step synthesis. Structure and physicochemical properties of the materials were characterized using Fourier transfer infrared spectroscopy with attenuated total reflectance device (FTIR-ATR), swelling behavior and water content measurements, porosity and density observations, scanning electron microscopy imaging (SEM), mechanical properties evaluation and thermogravimetric analysis. Metabolic activity with AlamarBlue assay and live/dead fluorescence staining were performed to evaluate the cytocompatibility of the obtained materials with MG-63 osteoblast-like cells. The results showed that the properties of the scaffolds based on silk fibroin, collagen and chitosan can be modified by chemical cross-linking with DAS and DAC. It was found that DAS and DAC have different influence on the properties of biopolymeric scaffolds. Materials cross-linked with DAS were characterized by higher swelling ability (~4000% for DAS cross-linked materials; ~2500% for DAC cross-linked materials), they had lower density (Coll/CTS/30SF scaffold cross-linked with DAS: 21.8 ± 2.4 g/cm3; cross-linked with DAC: 14.6 ± 0.7 g/cm3) and lower mechanical properties (maximum deformation for DAC cross-linked scaffolds was about 69%; for DAS cross-linked scaffolds it was in the range of 12.67 ± 1.51% and 19.83 ± 1.30%) in comparison to materials cross-linked with DAC. Additionally, scaffolds cross-linked with DAS exhibited higher biocompatibility than those cross-linked with DAC. However, the obtained results showed that both types of scaffolds can provide the support required in regenerative medicine and tissue engineering. The scaffolds presented in the present work can be potentially used in bone tissue engineering to facilitate healing of small bone defects.

scholarly journals Effects of Various Types of Expandable Graphite and Blackcurrant Pomace on the Properties of Viscoelastic Polyurethane Foams

Materials ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1801
Author(s):  
Rafał Oliwa ◽  
Joanna Ryszkowska ◽  
Mariusz Oleksy ◽  
Monika Auguścik-Królikowska ◽  
Małgorzata Gzik ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Chemical Structure ◽  
Oxygen Index ◽  
Polyurethane Foams ◽  
Expandable Graphite ◽  
Ftir Analysis ◽  
Limiting Oxygen Index ◽  
Peak Heat Release Rate ◽  
Physical And Chemical ◽  
Scanning Electron

We investigated the effect of the type and amount of expandable graphite (EG) and blackcurrant pomace (BCP) on the flammability, thermal stability, mechanical properties, physical, and chemical structure of viscoelastic polyurethane foams (VEF). For this purpose, the polyurethane foams containing EG, BCP, and EG with BCP were obtained. The content of EG varied in the range of 3–15 per hundred polyols (php), while the BCP content was 30 php. Based on the obtained results, it was found that the additional introduction of BCPs into EG-containing composites allows for an additive effect in improving the functional properties of viscoelastic polyurethane foams. As a result, the composite containing 30 php of BCP and 15 php of EG with the largest particle size and expanded volume shows the largest change in the studied parameters (hardness (H) = 2.65 kPa (+16.2%), limiting oxygen index (LOI) = 26% (+44.4%), and peak heat release rate (pHRR) = 15.5 kW/m2 (−87.4%)). In addition, this composite was characterized by the highest char yield (m600 = 17.9% (+44.1%)). In turn, the change in mechanical properties is related to a change in the physical and chemical structure of the foams as indicated by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) analysis.

Discussion on Repair Method of Concrete Highway Pavement

2013 ◽  
Vol 321-324 ◽  
pp. 209-212
Author(s):  
Chun Yan Xia
Keyword(s):  
Mechanical Properties ◽  
Preparation Program ◽  
Step Method ◽  
Concrete Technology ◽  
Concrete Material ◽  
Repair Method ◽  
Ordinary Concrete ◽  
One Step ◽  
Highway Pavement

nfluences on properties of the concrete highway pavement were analyzed in this paper, and the optimal formulation materials were gotten to use in the repair of used-broken cement blocks in the experiment. Polyurethane concrete material was prepared, combing the ordinary concrete technology with one-step method of the synthesis of polyurethane hard bubble, and then its mechanical properties of the relevant parameters were measured to determine the optimal preparation program. The results show that the polyurethane concrete also has sufficiently good mechanical properties while it has the characteristic of fast patching.

Sign in / Sign up

Export Citation Format

Share Document