Size, Form and Flexibility of the Rubber Molecule

1962 ◽  
Vol 35 (4) ◽  
pp. 908-917 ◽  
Author(s):  
G. V. Schulz ◽  
A. Mula
Keyword(s):  
Molecular Weight ◽  
Electron Microscope ◽  
Light Scattering ◽  
Virial Coefficient ◽  
Second Virial Coefficient ◽  
Quantitative Measure ◽  
Degree Of Polymerization ◽  
Bromine Content ◽  
Angle Scattering ◽  
Gaussian Density

Abstract Natural rubber can be brominated in dilute cyclohexane solution, whereby the molecular weight, corresponding to the bromine content, increases. For brominated rubber, increasing bromine content makes cyclohexane an increasingly poorer solvent, which is shown by a contraction of the molecule coils and a decrease in the second virial coefficient. Quantitative results were obtained through viscosity and light scattering measurements. Cyclohexane solutions of brominated rubber containing about 43% bromine have a θ point at room temperature. Here the second virial coefficient is zero and the coil has an ideal Gaussian density distribution. In this state the coil diameter is about 1.6 times bigger than for completely free rotation. A comparison of these data with X-ray low angle scattering could yield a quantitative measure of possible molecular branching. Brominated rubber with about one bromine per isoprene residue is a good starting material for the preparation of electron-microscope samples which can be used for the determination of the molecular weight distribution in rubber. The value of the weight average degree of polymerization determined by an electron microscope is in agreement with that determined through (1) light scattering and (2) ultracentrifuge and diffusion measurements. The molecular inhomogeneity of our sample is of the order of 0.5.

scholarly journals Particle Size Variation and Prediction of Molecular Weight of Bi(III) Hydrolyzed Polymer Using Light Scattering Technique

2013 ◽  
Vol 2013 ◽  
pp. 1-5 ◽  
Author(s):  
N. Priyadarshini ◽  
M. Sampath ◽  
Shekhar Kumar ◽  
U. Kamachi Mudali
Keyword(s):  
Molecular Weight ◽  
Particle Size ◽  
Light Scattering ◽  
Second Virial Coefficient ◽  
Size Variation ◽  
Degree Of Polymerization ◽  
High Concentration ◽  
Naoh Solution ◽  
Colloid Formation ◽  
Light Scattering Technique

The present paper gives an overview of the hydrolysis reactions up to colloid formation of Bi(III) in aqueous nitric acid medium using light-scattering measurements. The hydrolysis products of Bi were polynuclear complexes such as dimers, pentamers, and the most important is the hexameric species. In the present investigation Bi3+ polymers were prepared by diluting different concentrations of Bi(NO3)3·5H2O solutions to pH 1 ± 0.1 by adding 0.1 M NaOH solution as it starts to precipitates at pH 1.4. The degree of polymerization was found to be 5-6 units. Particle size measurements were performed, and it has been found that particle size increases at high concentration of Bi due to aggregation. Refractive index measurements were also performed. The molecular weight of hydrolyzed polymeric species of Bi was determined by using Debye plot, and it was estimated as 1236 Da. The second virial coefficient was found to be 6.24 × 10−3 mLg−1 Da. The present investigation confirms that the predominant complex in the solution has 5-6 Bi atoms.

Partitioning of charged and neutral dextran-dye derivatives in biphasic cellulose nanocrystal suspensions

2008 ◽  
Vol 86 (6) ◽  
pp. 503-511 ◽  
Author(s):  
Stephanie Beck-Candanedo ◽  
David Viet ◽  
Derek G Gray
Keyword(s):  
Molecular Weight ◽  
Partition Coefficient ◽  
Cellulose Nanocrystals ◽  
Partition Coefficients ◽  
Virial Coefficient ◽  
Total Concentration ◽  
Second Virial Coefficient ◽  
Fluorescein Isothiocyanate ◽  
Blue Dextran ◽  
Molecular Weights

The partitioning behaviour of dye-labeled dextrans of high molecular weight in aqueous suspensions of native cellulose nanocrystals was studied. Cellulose concentrations lie in the isotropic–nematic coexistence region. Blue dextrans of various molecular weights and degrees of substitution of dye molecules (anionic Cibacron blue 3G-A) were investigated. Increasing the total concentration of blue dextran and degree of dye substitution led to increasing partition coefficients. Increasing dextran molecular weight resulted in higher partition coefficients, in agreement with theory. Partition coefficients were larger than predicted theoretically using a second virial coefficient approximation. Electrostatic and entropic contributions to the partition coefficient of blue dextran are discussed. Dextrans labeled with neutral fluorescein isothiocyanate did not partition preferentially in this system.Key words: partition coefficient, cellulose nanocrystals, dextrans, degree of substitution, polyelectrolyte.

scholarly journals Molecular Weight, Osmotic Second Virial Coefficient, and Extinction Coefficient of Colloidal CdSe Nanocrystals

2002 ◽  
Vol 106 (21) ◽  
pp. 5500-5505 ◽  
Author(s):  
A. Striolo ◽  
J. Ward ◽  
J. M. Prausnitz ◽  
W. J. Parak ◽  
D. Zanchet ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Extinction Coefficient ◽  
Virial Coefficient ◽  
Second Virial Coefficient ◽  
Cdse Nanocrystals
Sign in / Sign up

Export Citation Format

Share Document